(edit: removed advice about pause/delete, wow I should really watch the whole thing before commenting) I didn't know you could use the wait to set a loop was using two courses one to the shop and one to the farm but this way one course does it all, you just start at nearest to only go from shop to farm, thanks for that, still new to CP so please keep the tutorials coming, I need them.
Dude! Thank you! xXx Specifically for the Refill Course tutorial. Twas really bugging me. There's a fiddly bit on mine where I didn't realise I had to tell Courseplay to tell the tractor to reverse a-ways after refilling and THEN turn, cos the refill point is a cul-de-sac - not a drive-through, but I got over that in the end. Really wish there was a full manual, though . . .
Just in case you haven't figured it out yet the straight or curved option for the Harvester on the Headlands has to do with dropping a straw swath. If your combine is running a headland and he has to make a tight turn meaning he will have to stop and reverse, you may not want him to use a curved reverse if he's dropping straw swath, you would want the combine to backup in a straight line until the straw swath has finished dropping all the straw.. If you select the curved option when the combine stops to backup he will reverse in a curving motion, which will jack up the straw swath being laid on the ground and make it difficult to bale or pick up. Hope this makes sense..
Very helpful videos, ive always wanted to get into courseplay but it seemed like more work than its worth, but youve made it MUCH easier to get into. After last episode with grasswork i used that with a bail/wrapper combo and it does great job with that.
Watch these over the last couple days and put it into practice 2night. Have a gr8 fun setting them up and even figure out how to put the feild duties into their own feild folders. Thanks for sharing.
Thanks Farmer Klein for another great tutorial videos. Was looking forward to another instalment video from you. Great job. Haven’t had more than a few hours to play with Courseplay this week but plan to spend a good chunk of time with the mod mid next week. Very exciting as a complete noob to the mod whenever I create a new course and it actually works. So many possibilities this mod opens up which is wonderful.
Like you, I had problems with setting the wagon to automatically find the combine. That is until I noticed the field selector located just under the auto/manual field. If you set the field selector to the field the combine is working auto find works.
here a tip.... try to set the endpoint of the unload-course (unload combine) INSIDE the particular field and use "automatic search combine" and it will work.. ;-) if you end the set course outside the field, course play isn not able to find the combine automatically... An other thing someone mentioned below is, that the offset can be incorrect.. had that problem with mods only, so if you use an automatic offset with an original tractor you shouldn't have any issues with it... if so, then you have to set the offset manually....
...I can't seem to get the multiple courses to work like you did at ~12:17. I have a forage harvester mowing/collecting grass and I'd like for it to go to the silage pit and stop. There, I would take over and unload. Next, I'd like for it to resume mowing from the point it stopped at. I've tried everything I can think of!! Very frustrating.
Hey I love your videos like this.. I'm running into a small problem, and I'm not 100% sure how to solve it.. I know that in 17, the Pathfinding AI wasn't the best in the world, and it would drive the tipper right into the fruit. For people with Crop Destruction, this was an absolute nightmare.. Is there a way to make the combine reverse and turn so that the pipe is out of the fruit? Every once in a while I get the message "Pipe is in Fruit" with a full combine, so I have to stop the combine, manually back it up and out, call the driver over, and then resume.. gets to be a tad tedious, and I was under the impression that the new pathfinding system fixed that, but to date I haven't seen any change..
Would it make more sense to line up all the buy points so the same course drove through all the trigger points? So you could use the same course for multiple buys.
I really like courseplay, only flaw is when I do grain carting, when auger wagon is full and attempts to load the trailer, player character completely freezes and can't move or do nothing. It won't let me save my game, it says saving but when you go to close out the game to reset it. It says do you wish to continue without saving. It only does when grain carting.
Not able to use the overloader button on coureplay as of yet. Is there a way around that when using an auger wagon from a combine into a truck and trailer combo to a sell point?
Regarding the combi mode. Automatic works very well BUT u have to be inside the field limits for courseplay to detect the harvester that is working inside that specific field. Note that this only works if u set the harvester to work before u activate the unloading course. If u dont then the tractor is gonna be inside the field potentialy destroying crops as its driving and can even get in the way of the harvester depending on where it starts. A short summary, if the harvester have a head start it works if it dosent have a head start it dosent work.
This is perfect video about basic CP mods. Very very thank you because harvestering of patatoes and beets going to nightmare :) but mods doesnt work like this at v6.02.... also we want to see what happen to hay searcher who stopped by train?
Thanks for the video! Have you had any luck with a reversing unload yet? I have been scratching my head with that one. Either my vehicle keeps backing up until it hits something and stops, or it dumps just before the trigger. Possibly they haven't addressed that yet. I have noticed a bit of a learning curve so far and I am very thankful to the developers for their work so far. Every version gets better and better.
I just hope stability on mod maps improves over time. I like Honey Dew Xl and every time I try to use CP the game freezes and only an alt+tab and force close will fix it. Have not had that happen on flusstal or ravenport yet so not exactly sure if its the map or cp, or both.
Honestly I had little luck with those in 17. Between you and me what you see me do in the these videos is about the extent of usage I have had with it in 19. I set up the video. I save the game. I run through it making sure CP acts as I expect it to. I revert back to the save and start recording. I have had very little time for actual playing the game with the Jan challenge running. Feb feels so refreshing as I feel I will actually be able to play the way I want to play with mods I want to use.
@@FarmerKlein I could do anything with courseplay in 17 I could do driving myself. I guess I am just getting ahead of myself with courseplay 6. It is still beta and getting better every update. I will just wait and see.
@@verios44 yes they are. I updated last night and it was night and day difference. Thanks for the heads up on the new version. I appreciate all the hard work going on behind the scenes. I am sure they will make it top notch before long.
I'm using the latest version of Courseplay version 6.01.00076 and am have a real hard time getting a refill course to work or even getting the multiple fields worked by the same tool that you mentioned in the previous video with the loading of 3m Courses. I've been trying to get a Tractor to Cultivate 3 fields in sequence but despite following what you did and merging the courses, they only ever drive to the end of the first field and stop saying they've reached a trigger. Despite merging the courses, when I put the course dots on they still appear as three completely seperate fields with separate start and end points and are not being connected in anyway by courseplay. The same occurs on a seeding or fertilser course when I load/merge in my refill course. It shows as two separate courses when you bring up the dots with no connection, so again when the Worker runs out of seed or fertiliser in the field they are just stopping and not moving over to the refill course, going to refill and then coming back and continuing.
This has nothing to do with courseplay, but what controller system do you use? I ask because I have a Thrustmaster T80 with my pc and I can't get the buttons to map properly. The wheel works fine and sometimes even the pedals, but all the other buttons are misread. For example: if I assign the X button to Jump, it comes up as a different button. The same with every other button or the steering wheel paddles. Is there a fix for this? I've scoured the web searching for an answer but haven't found it yet.
THANKS for all your tutorials. You got me started on CP in the first place and I have enjoyed its scope ever since. One major frustration however is I am still only aware of your original Github link to get the latest version however even doing this just last night (01 June 21) does not give me the version you have with the extra combine button. Could you kindly repost the correct/updated link to get the version you use in the video. Thanks again in advance.
The link I posted is the only way to get the official courseplay release. This page github.com/Courseplay/courseplay and then scroll down you will see a link to the latest version already packaged. I do not have the version I used during these videos and even if I did I would not suggest using it as it had plenty of issues with it and they have had other changes and improvements since. As it happens right now the most recent dev version is also the same version released on the giants mod hub as of earlier this week.
@@FarmerKlein Thanks so much for the reply. I didn't realise it came out on modhub. Have just downloaded it. Mainly I used it in 17 for unloading a combine I was driving and take the grain to the farm silo but I have heard this isn't possible with the FS19 version yet - i.e. the player can't drive the combine, you have to generate a CP route for the combine to be controlled by CP AI to get the tractor to unload - is that true? Thats why I was interested in the extra combine button.....
@@barrya554 Honestly I do not know. I gave up on CP quite a long time ago after making these videos as it wa just to broken. AI would always turn into eachother on every pass it would run into everything as it seemed to have no idea of how to avoid anything. It seems to be better now and I only just recently started to use it again. As in maybe the last 2 weeks. In that time I have seen it sucessfully drive AROUND the entire farm and cow fence area to go from the field work course to the start point of a fill course and back and then while working a field work course run into a tree at the field edge on a turn....
@@FarmerKlein Again thanks for reply. I agree. From the modhub version it does seem a lot more reliable so far. Quick question, I have been working on my own detailed British 4x map for the last 18 months and think it has some real potential in the community, especially for teamplay - (waiting to see how many changes '22 brings to the Giants editor as hoping it will transfer over fairly easily). I know you review maps but do you assist in any development questions? Maybe I can PM you some how? The one main weird issue I have is all my animal places are customised and work perfectly with seasons but in non-seasons game saves the animals don't spawn when purchased?
@@barrya554 I am not a modder so I wouldn't know anything about how to help you with the issue but your free to join our discord and ask as there are plenty of modders who can maybe help and when it comes to testing we can assist there for sure. discord.gg/xnfkxPDM
Hey - not bought FS19 yet but great videos as usual. Just for info, in FS17 courseplay, auto searching for a combine worked only if your unload vehicle starts and ends inside the field where the a combine is. Might be worth trying in FS19?
i want to make a loop where some cars to just drive around non stop, the AI traffic is very limited and the city looks dead, so i want my cars to drive around all day. How can i do that ??? Thanks
Hey Farmer Klein, I appreciate all you're doing here. I've got a problem I hope someone reading here can help with. I'm not getting any tip triggers on any of my silos or storage barns. Loaded trucks and wagons just roll on through and back to the field. This occurs on both the mod structures and the stock game structures. Any ideas? Any help would be appreciated, thanks in advance.
Which mode are you in. If you are in transport mode it will likely do that vs the first mode. i forget the name. you want to be in the first mode to empty into the silo.
@@FarmerKlein Well, I'm using the Combi mode for unloading combines. It also happens when I'm picking up straw or grass windrows and expecting to dump it at my storage barns....just drives on through. I've got several thousand hours of courseplay time in (older versions of FS) and I've never run into this situation of having no dump triggers on any map. I'm running the steam version of FS19 and I download and upgrade my courseplay 6 daily, currently build 47.
Great series! I am having an issue on Combi empty on Lone Oak. Driver fills trailer to set level, but goes toward first waypoint and drives in circles. If I interrupt driver and set him on the course he works fine. Thoughts on this? Thanks in advance
I can get the combined course to work with filling a seed/lime/fertilizer but I cannot get the loading wagon to start the unload course to work once its full? you kinda skipped the loading wagon in this tutorial . Can you revisit combining courses for the loading wagon (picking up hay and unloading it at barn) Thanks! I really enjoy your videos!!
you dont have to hit the append folder you can just hit the same folder as you did on the first course and it will combine them. i have never actually used the append(middle Folder)
Hey, may have been asked in a question already, but I have an issue with tractor unable to reach, especially on 16x maps. The tractor unloading the harvest cant find the harvest after it reaches a certain point on the map. Any way you can show how to fix this with large fields
FK, IS it possible to set the harvester to not drop swath on a headland but enable it for normal passes? Not sure so i thought you might know.. Just started playing with the mod and your vids have been most helpful. TY sir Could you also, perhaps, do a video on how to use/setup an auger wagon/truck combo for offloading a combine. TY
On the harvester I dont think cp controls this I think it just uses the last state of the harvester so hit , to change the swath setting. On the second half of your question I have been wanting to do a more advanced harvesting video but cp has been tossing errors when I try to set it up. I'm waiting for some updates that will fix the issue.
I’ve got a question with the grain transport from Field to grain bin so I use the grain trailer for my truck that has the two compartments so I set a waypoint from my field to the grain bin and the problem is when the trailer is full it goes to the grain bin no problem but the problem is it will only empty the one compartment it will not empty the second compartment can you help me with that am I doing something wrong?
What you did wrong was use the two compartment trailer. This issue has existed for as long as corseplay has been available for FS19. It does not seem to understand that a trailer could have multiple fill areas.
There is a manual offload button when you set up the course, maybe try and use that when setting up a new course so it will drive forward after the automatic offload then see if it triggers another offload where the second part will empty? Save before just in case it dumps a load and doesnt get stored. Just a thought.
i have been waiting for leveling support and bucket support to demonstrate a full forage harvest, carting, leveling and selling of silage setup. right now leveling and bucket support is not in CP last I checked. The sugar cane carts work like buckets so they would likely need this bucket support also.
I’m not sure what I’ve done wrong I’ve been using Course-play for about a months now When I run into some problems I seem to fix it but this one I’m not sure what I have done and the problem is when the harvester is full it will go looking for something to unload in to how do I stop that?
@Farmer Klein I have been trying to figure out how to get a driver to unload the combine. I have noticed there is a function that appears it should do just that but i cannot get it to work? Any help is appreciated!
Just curious have you had any trouble with the tractor having a hard time to line up with the combine? Have you tried turning on AI turns? If so what difference does it make? Is there any way to make it line up better? Also I am having troubles with the tractor cutting off the combine and pushing it out of the way.
I personally no longer use courseplay as I found it a huge disappointment from the FS17 version. I have heard its better now but its still hard to come back thinking about the time sink I had with some tasks fixing workers over just doing the work myself or a standard helper.
Its good. To some degree its the timing of presenting the information. with CP there is so much to cover I try to break it up into useful and similar things. Fixing course was going to be its own short video but when i messed up the seed course I was like why why not go over that now a little. But when the mix up is somewhere in the middle of the course and you do not realize it until after the course is setup you need to redo it.
Does the harvester - unload course work for the BGA and for my Krone Big X? I don't want it to just stand around while i drive to the BGA myself (so i'd like to have a 2nd driver)
Hey mate can you make the tip trigger route. Like from field to silo n unloading. I'm unable to get that. It never stops at the silo but just drive over even though I've put up a tip trigger on the silo. It just unloads after exiting the silo n dropping on the ground. Can you make how to set up this route.
U shouldent need to manually set up a tip point. Just drive over it as straight as possable and try slowing down abit it may fix the problem or your own tip off point may be the problem. Also check your working mode, If u empty a harvester use combi mode if not use grain transport mode.
Hi Farmer K, When the harvester was having difficulty lining up with the trailer to fill it, on the previous course play we could adjust the distance that the trailer was from the harvester, to shoot the grain into the middle of the trailer, is this option still available?
It may be, In my own game play I use CP for some functions but I do not make extensive use of it like others. So some of the more finer fine tuning aspects I have not run across that is old hat for others.
i hope you see this but iam having an issue with the unloading after the trailer is full of product. it seems to tip the trailer but freezes in a never ending unload sequence. looks like its unloading but the number doesnt go down just sits there. ive tried different modded silos, modded trailers, anything i could think of. do you have an idea?
I would say just download the newest release of courseplay and see if that corrects the issue. It is an ever changing thing at this point and you might have gotten a build that had something broken.
@@FarmerKlein i actually thought i downloaded the new one. Ill have to see about doing what ya said and try a fresh download. Thanks for the reply. Love the videos you cost me money i had to buy fs19 haha
The only thing I can get it to do is off load Harvesters.. tried useing it in field work mode with a loading wagon to pick up windrows, and go dump at silo. But it just drivers right by the silo without dumping. I have your video running on my laptop right next to me doing what you are, step by step, But dose not dump.. Help Please.
If you have not updated courseplay please do so it might have not worked in the version you have. With this being early development things may break that used to work or things that where broken before start working with an update.
Farmer Klein I’m having a problem trying to get Courseplay to unload a Harvester with a Tractor and Trailer and take the crop to a silo or a sell point. I’ve recorded the course from field to destination and back for the Tractor and Trailer. I set it into Combine Mode and hit start but Courseplay shows a little error on the bottom that it’s the wrong trailer for this mode. I’ve never seen that before and am Just using a regular Tractor and Trailer so don’t see how it can be incompatible, especially as I can go and manually fill the trailer from the harvester and take and tip the crop myself.
I have a problem, maybe someone can help me? When I have cut down, straw, hay or grass, and I want to pick it up with a trailer, it will not empty automatically at my farm, return to the field and restart picking up. I tried all "modes"
You do very good tutorials.. I can't get my Seeders to re-fill from anything but the pallets, With or with out courseplay, It don't matter.. How did you get it to work ?..
Im new to farm sim series as 19 is first time playing...can you turn off the lines showing your course if you just wanted to sit back and watch equipment do a field?
I fixed that by setting the horizontal offset to a number slightly greater than default. Easiest way I found was to get in the truck (That is unloading the combine) as it is approaching the combine. Watch the truck approaching and click the Horizontal offset higher until the truck is just about to clear the header. This is especially useful for using mod headers that are different from the one intended. I am a fan of the Midwest 50 foot header.
Why is it evertime I try to have the tractor unload the combine, after combine gets full and the tractor rear ends the combine every time and never unloads the combine. I just recently downloaded the mod and learning more about it, not sure why this happening
Sou is like it's not recognizing the need to offset due to the pipe. Be sure your in the right mode aside from that check if there might be a courseplay update.
There isent really any diffrense in that. The main thing is to make the tractor and trailer to be as straight to the unload point as possable before u start backing up to the trigger.
In theory you would look at the distance numbers. If they are moving hopefully you can tell by the distance if your selecting the close or the far one for example.
Hi there farmer Klein . Got a problem with my coursplay . At start of the game is SAYS do you wana let cp scan fields / i say yes , then it asks you about payment , i say yes ,...then in game i can,t activate it neither by right mouse or del button . THE big Q is WHY ?
dabija Laurentiu florentin I had this same problem, I just downloaded the latest version two days ago and works like a charm except in two places, no sugarcane yet and I have a mod grain truck that sucks my money dry. So try the updated version and see.
still having a ''tip trigger reached '' error when trying collect hay/straw with 2 combined courses, it's a reported issue, let's just wait and hope for the best!!!!
In my testing before i recorded the video i had the issue as I mentioned in the video where the driver would stop when it was transitioning between the field work course and the unload course. i jump into the tractor and jump out right away and the driver takes off to run the unload course. he would then return to the field and get back to work with out intervention but just the transition from field work when the trailer was full or the seeder/fertilizer was empty did i need to get into the tractor to have the courseplay driver continue. I did witness once in four trips the driver not unloading but going through the hayloft trigger. all other times they stopped.
Does anyone know what the best way to get an ai to fill up a slurry tanker and then drive to me in a field so I can refill my tanker using the one the ai drove over to me and then they head back and refill again and repeat that
courses are saved in their own folder in you Farming Simulator 2019 folder (where your save games and mod folder is located) TO update it you just download a new clone from the github and repeat the steps you did the last time you downloaded it to unzip the clone, zip up the files in courseplay-master and then rename that zip to what ever the zip is currently named in the mod folder and drop the new file in the mod folder replacing the old zip. If you wish to keep a copy of the old zip just move it out of the mod folder before you drop the new one in. Be sure to name it exactly the same. as you do not want two copies in the mod folder at the same time.
Farmer Klein, Has Courseplay AI been changed to avoid running into the wheat when emptying the combine by only unloading when the pipe is on the off side to the wheat? or was you just lucky on both occasions, or did you cheat with the video? Will the tractor always avoid the crops, or does is mess up as the older ones did.
The CP AI does do a better job now at detecting crop on the field and does attempt to avoid driving on it. will it always avoid it. probably not but it will try.
I did not try this but it should work. just do a fill loop around both fill triggers and be sure the fill triggers are apart enough that the driver will exit one trigger before it enters another.
It sounds like maybe that functionality has not been enabled. Be sure to have the most recent version from github. I have used courseplay so little over the last several months myself I have not used that feature.
@@FarmerKlein thanks farmer i downloaded another version on sunday but have not installed it yet, will i have to delete the other version first or can i put it over the other one
i dont see the generate course button and i have the latest mod version , can you please help? the hub and all seems to be working but i dont see the gear button to generate a course
I would say no. I never had luck with it late in 17 with MP when they stated the lateer development versions did support MP. It always seemed to toss LUA errors for me.
Trying to harvest cotton with the cotton harvesters, both vanilla and from the JD cotton DLC, will break the game using courseplay 6. Tried it on every map, new download, no mods other than newest version of courseplay6, tried with and without John Deere cotton dlc. Always the same. Complete loss of the worker, can't dismiss worker, can't esc. Can't access anything, have to end task in task manager to get the game to stop.
Saved courses are stored outside the mod so there is no risk of having your saved course get deleted when updating the mod. There may be instances where a past save course is no longer comparable with a new version of CP but they wont be deleted unless you delete them.
So I have a good video idea for you, man...how to get 2 harvesters working in the same field at the same time lol I play on Western Australia which is a massive map and it takes forever with just harvester going
I have that planed when ever they get the auger wagons working in CP. I intend to do a multi harvester with multi auger wagons to a semi that then hauls the grain off all via CP but right now it blows chunks as soon as I set an auger wagon off on a course.
Just got back into fs19 after about 6 months. Forgot how to use course play. This is still the best course play tutorial. Thanks
Your videos are very helpful and in depth. Thanks for them all and I look forward to watching many more as they come out.
(edit: removed advice about pause/delete, wow I should really watch the whole thing before commenting) I didn't know you could use the wait to set a loop was using two courses one to the shop and one to the farm but this way one course does it all, you just start at nearest to only go from shop to farm, thanks for that, still new to CP so please keep the tutorials coming, I need them.
Dude! Thank you! xXx
Specifically for the Refill Course tutorial. Twas really bugging me.
There's a fiddly bit on mine where I didn't realise I had to tell Courseplay to tell the tractor to reverse a-ways after refilling and THEN turn, cos the refill point is a cul-de-sac - not a drive-through, but I got over that in the end.
Really wish there was a full manual, though . . .
Just in case you haven't figured it out yet the straight or curved option for the Harvester on the Headlands has to do with dropping a straw swath.
If your combine is running a headland and he has to make a tight turn meaning he will have to stop and reverse, you may not want him to use a curved reverse if he's dropping straw swath, you would want the combine to backup in a straight line until the straw swath has finished dropping all the straw..
If you select the curved option when the combine stops to backup he will reverse in a curving motion, which will jack up the straw swath being laid on the ground and make it difficult to bale or pick up.
Hope this makes sense..
Very helpful videos, ive always wanted to get into courseplay but it seemed like more work than its worth, but youve made it MUCH easier to get into. After last episode with grasswork i used that with a bail/wrapper combo and it does great job with that.
Watch these over the last couple days and put it into practice 2night. Have a gr8 fun setting them up and even figure out how to put the feild duties into their own feild folders. Thanks for sharing.
great news
Thanks Farmer Klein for another great tutorial videos. Was looking forward to another instalment video from you. Great job. Haven’t had more than a few hours to play with Courseplay this week but plan to spend a good chunk of time with the mod mid next week. Very exciting as a complete noob to the mod whenever I create a new course and it actually works. So many possibilities this mod opens up which is wonderful.
thanks for your courseplay tutorials, really good. Will check out your other fs19 vids too!
Thank you. This is quite helpful. I was wondering how to get this done.
A small tweak here and there with the current version, and we're off
Like you, I had problems with setting the wagon to automatically find the combine. That is until I noticed the field selector located just under the auto/manual field. If you set the field selector to the field the combine is working auto find works.
Klein you are doing a great job. Thank you.
I recommend for road driving using auto drive it is way more flexible. You can combine the 2 it’s great. Except you can’t unbind rmb to courseplay
here a tip.... try to set the endpoint of the unload-course (unload combine) INSIDE the particular field and use "automatic search combine" and it will work.. ;-) if you end the set course outside the field, course play isn not able to find the combine automatically...
An other thing someone mentioned below is, that the offset can be incorrect.. had that problem with mods only, so if you use an automatic offset with an original tractor you shouldn't have any issues with it... if so, then you have to set the offset manually....
Yes !! So much helpful. Thank you so very much for making these tutorials. Awesome instructions sir.
very helpful thank you i have been trying to get this to work for some time now this really helped
...I can't seem to get the multiple courses to work like you did at ~12:17.
I have a forage harvester mowing/collecting grass and I'd like for it to go to the silage pit and stop. There, I would take over and unload. Next, I'd like for it to resume mowing from the point it stopped at. I've tried everything I can think of!! Very frustrating.
Great video! ..thanks
Will definitely install courseplay now
Hey I love your videos like this.. I'm running into a small problem, and I'm not 100% sure how to solve it.. I know that in 17, the Pathfinding AI wasn't the best in the world, and it would drive the tipper right into the fruit. For people with Crop Destruction, this was an absolute nightmare.. Is there a way to make the combine reverse and turn so that the pipe is out of the fruit? Every once in a while I get the message "Pipe is in Fruit" with a full combine, so I have to stop the combine, manually back it up and out, call the driver over, and then resume.. gets to be a tad tedious, and I was under the impression that the new pathfinding system fixed that, but to date I haven't seen any change..
Would it make more sense to line up all the buy points so the same course drove through all the trigger points? So you could use the same course for multiple buys.
Thanks man, very helpful tutorial. Good one.
Very Helpful, Thanks for producing this video.
Wish it had an option to edit/undo waypoints if you crash into something so you don't have to start from the beginning.
Yes it’s auto drive way more flexible
I really like courseplay, only flaw is when I do grain carting, when auger wagon is full and attempts to load the trailer, player character completely freezes and can't move or do nothing. It won't let me save my game, it says saving but when you go to close out the game to reset it. It says do you wish to continue without saving. It only does when grain carting.
Not able to use the overloader button on coureplay as of yet. Is there a way around that when using an auger wagon from a combine into a truck and trailer combo to a sell point?
Regarding the combi mode. Automatic works very well BUT u have to be inside the field limits for courseplay to detect the harvester that is working inside that specific field. Note that this only works if u set the harvester to work before u activate the unloading course. If u dont then the tractor is gonna be inside the field potentialy destroying crops as its driving and can even get in the way of the harvester depending on where it starts. A short summary, if the harvester have a head start it works if it dosent have a head start it dosent work.
I've got the most recent version of courseplay but it still won't refill the lime when I did the refill courseplay
Thank you. This was helpful.
This is perfect video about basic CP mods. Very very thank you because harvestering of patatoes and beets going to nightmare :) but mods doesnt work like this at v6.02.... also we want to see what happen to hay searcher who stopped by train?
Nice Tutorial, Super helpful. I wonder if you can set up a course that refills from a big bag or pallet?
Right, or if you can let the mod park the vehicles after the work.
Thanks for the video! Have you had any luck with a reversing unload yet? I have been scratching my head with that one. Either my vehicle keeps backing up until it hits something and stops, or it dumps just before the trigger. Possibly they haven't addressed that yet. I have noticed a bit of a learning curve so far and I am very thankful to the developers for their work so far. Every version gets better and better.
I just hope stability on mod maps improves over time. I like Honey Dew Xl and every time I try to use CP the game freezes and only an alt+tab and force close will fix it.
Have not had that happen on flusstal or ravenport yet so not exactly sure if its the map or cp, or both.
Honestly I had little luck with those in 17. Between you and me what you see me do in the these videos is about the extent of usage I have had with it in 19. I set up the video. I save the game. I run through it making sure CP acts as I expect it to. I revert back to the save and start recording. I have had very little time for actual playing the game with the Jan challenge running. Feb feels so refreshing as I feel I will actually be able to play the way I want to play with mods I want to use.
@@FarmerKlein I could do anything with courseplay in 17 I could do driving myself. I guess I am just getting ahead of myself with courseplay 6. It is still beta and getting better every update. I will just wait and see.
Alan Green it seems they are currently working on fill level check issues with cp. 60100021 is already up.
These guys are updating like crazy.
@@verios44 yes they are. I updated last night and it was night and day difference. Thanks for the heads up on the new version. I appreciate all the hard work going on behind the scenes. I am sure they will make it top notch before long.
I'm using the latest version of Courseplay version 6.01.00076 and am have a real hard time getting a refill course to work or even getting the multiple fields worked by the same tool that you mentioned in the previous video with the loading of 3m Courses. I've been trying to get a Tractor to Cultivate 3 fields in sequence but despite following what you did and merging the courses, they only ever drive to the end of the first field and stop saying they've reached a trigger. Despite merging the courses, when I put the course dots on they still appear as three completely seperate fields with separate start and end points and are not being connected in anyway by courseplay.
The same occurs on a seeding or fertilser course when I load/merge in my refill course. It shows as two separate courses when you bring up the dots with no connection, so again when the Worker runs out of seed or fertiliser in the field they are just stopping and not moving over to the refill course, going to refill and then coming back and continuing.
hm, not sure. there is an option that says to stop at next way point or trigger maybe that is activated.
This has nothing to do with courseplay, but what controller system do you use? I ask because I have a Thrustmaster T80 with my pc and I can't get the buttons to map properly. The wheel works fine and sometimes even the pedals, but all the other buttons are misread. For example: if I assign the X button to Jump, it comes up as a different button. The same with every other button or the steering wheel paddles. Is there a fix for this? I've scoured the web searching for an answer but haven't found it yet.
THANKS for all your tutorials. You got me started on CP in the first place and I have enjoyed its scope ever since. One major frustration however is I am still only aware of your original Github link to get the latest version however even doing this just last night (01 June 21) does not give me the version you have with the extra combine button. Could you kindly repost the correct/updated link to get the version you use in the video. Thanks again in advance.
The link I posted is the only way to get the official courseplay release. This page github.com/Courseplay/courseplay and then scroll down you will see a link to the latest version already packaged. I do not have the version I used during these videos and even if I did I would not suggest using it as it had plenty of issues with it and they have had other changes and improvements since. As it happens right now the most recent dev version is also the same version released on the giants mod hub as of earlier this week.
@@FarmerKlein Thanks so much for the reply. I didn't realise it came out on modhub. Have just downloaded it. Mainly I used it in 17 for unloading a combine I was driving and take the grain to the farm silo but I have heard this isn't possible with the FS19 version yet - i.e. the player can't drive the combine, you have to generate a CP route for the combine to be controlled by CP AI to get the tractor to unload - is that true? Thats why I was interested in the extra combine button.....
@@barrya554 Honestly I do not know. I gave up on CP quite a long time ago after making these videos as it wa just to broken. AI would always turn into eachother on every pass it would run into everything as it seemed to have no idea of how to avoid anything. It seems to be better now and I only just recently started to use it again. As in maybe the last 2 weeks. In that time I have seen it sucessfully drive AROUND the entire farm and cow fence area to go from the field work course to the start point of a fill course and back and then while working a field work course run into a tree at the field edge on a turn....
@@FarmerKlein Again thanks for reply. I agree. From the modhub version it does seem a lot more reliable so far. Quick question, I have been working on my own detailed British 4x map for the last 18 months and think it has some real potential in the community, especially for teamplay - (waiting to see how many changes '22 brings to the Giants editor as hoping it will transfer over fairly easily). I know you review maps but do you assist in any development questions? Maybe I can PM you some how? The one main weird issue I have is all my animal places are customised and work perfectly with seasons but in non-seasons game saves the animals don't spawn when purchased?
@@barrya554 I am not a modder so I wouldn't know anything about how to help you with the issue but your free to join our discord and ask as there are plenty of modders who can maybe help and when it comes to testing we can assist there for sure. discord.gg/xnfkxPDM
Hey - not bought FS19 yet but great videos as usual. Just for info, in FS17 courseplay, auto searching for a combine worked only if your unload vehicle starts and ends inside the field where the a combine is. Might be worth trying in FS19?
i want to make a loop where some cars to just drive around non stop, the AI traffic is very limited and the city looks dead, so i want my cars to drive around all day. How can i do that ??? Thanks
Please tell me how you get the loading wagon working? When mine gets full, it freezes the camera and doesn’t want to go on its path to be emptied
Hey Farmer Klein, I appreciate all you're doing here. I've got a problem I hope someone reading here can help with. I'm not getting any tip triggers on any of my silos or storage barns. Loaded trucks and wagons just roll on through and back to the field. This occurs on both the mod structures and the stock game structures. Any ideas? Any help would be appreciated, thanks in advance.
Which mode are you in. If you are in transport mode it will likely do that vs the first mode. i forget the name. you want to be in the first mode to empty into the silo.
@@FarmerKlein Well, I'm using the Combi mode for unloading combines. It also happens when I'm picking up straw or grass windrows and expecting to dump it at my storage barns....just drives on through. I've got several thousand hours of courseplay time in (older versions of FS) and I've never run into this situation of having no dump triggers on any map. I'm running the steam version of FS19 and I download and upgrade my courseplay 6 daily, currently build 47.
Great series! I am having an issue on Combi empty on Lone Oak. Driver fills trailer to set level, but goes toward first waypoint and drives in circles. If I interrupt driver and set him on the course he works fine. Thoughts on this? Thanks in advance
I can get the combined course to work with filling a seed/lime/fertilizer but I cannot get the loading wagon to start the unload course to work once its full? you kinda skipped the loading wagon in this tutorial . Can you revisit combining courses for the loading wagon (picking up hay and unloading it at barn) Thanks! I really enjoy your videos!!
That should be under the video where i have CP do grass work.
Hi i know this is an old video but whould be nice to take a slower look at how you combine 2 courses, dident get that.
Great video very helpful keep them coming 👍
you dont have to hit the append folder you can just hit the same folder as you did on the first course and it will combine them. i have never actually used the append(middle Folder)
Hey, may have been asked in a question already, but I have an issue with tractor unable to reach, especially on 16x maps. The tractor unloading the harvest cant find the harvest after it reaches a certain point on the map. Any way you can show how to fix this with large fields
Never had that happen to me. given i dont play on huge maps. I would not count on auto detect I would specify the harvester.
FK, IS it possible to set the harvester to not drop swath on a headland but enable it for normal passes? Not sure so i thought you might know.. Just started playing with the mod and your vids have been most helpful. TY sir
Could you also, perhaps, do a video on how to use/setup an auger wagon/truck combo for offloading a combine. TY
On the harvester I dont think cp controls this I think it just uses the last state of the harvester so hit , to change the swath setting. On the second half of your question I have been wanting to do a more advanced harvesting video but cp has been tossing errors when I try to set it up. I'm waiting for some updates that will fix the issue.
Hello, Is the courseplay overload button working for everyone else? I have the other options just not that one.
I’ve got a question with the grain transport from Field to grain bin so I use the grain trailer for my truck that has the two compartments so I set a waypoint from my field to the grain bin and the problem is when the trailer is full it goes to the grain bin no problem but the problem is it will only empty the one compartment it will not empty the second compartment can you help me with that am I doing something wrong?
What you did wrong was use the two compartment trailer. This issue has existed for as long as corseplay has been available for FS19. It does not seem to understand that a trailer could have multiple fill areas.
There is a manual offload button when you set up the course, maybe try and use that when setting up a new course so it will drive forward after the automatic offload then see if it triggers another offload where the second part will empty? Save before just in case it dumps a load and doesnt get stored. Just a thought.
Mine wont go to refil with the run it just flags saying it needs to be refilled.
Can you show how to use a second trailer on the side to go to your silo...most likely used in sugarcane farming
i have been waiting for leveling support and bucket support to demonstrate a full forage harvest, carting, leveling and selling of silage setup. right now leveling and bucket support is not in CP last I checked. The sugar cane carts work like buckets so they would likely need this bucket support also.
Because I been trying and they just do circles, maybe I should try a regular tipper?
I’m not sure what I’ve done wrong I’ve been using Course-play for about a months now When I run into some problems I seem to fix it but this one I’m not sure what I have done and the problem is when the harvester is full it will go looking for something to unload in to how do I stop that?
The harvester should be in field work mode. Sounds like you made the course in some other mode.
This video helped me a bunch, thumbs up and sub!
@Farmer Klein I have been trying to figure out how to get a driver to unload the combine. I have noticed there is a function that appears it should do just that but i cannot get it to work? Any help is appreciated!
suppose i should watch the whole video lol thanks Klein
😊
Just curious have you had any trouble with the tractor having a hard time to line up with the combine? Have you tried turning on AI turns? If so what difference does it make? Is there any way to make it line up better? Also I am having troubles with the tractor cutting off the combine and pushing it out of the way.
I personally no longer use courseplay as I found it a huge disappointment from the FS17 version. I have heard its better now but its still hard to come back thinking about the time sink I had with some tasks fixing workers over just doing the work myself or a standard helper.
Sorry didn't see the whole video. good job.
Its good. To some degree its the timing of presenting the information. with CP there is so much to cover I try to break it up into useful and similar things. Fixing course was going to be its own short video but when i messed up the seed course I was like why why not go over that now a little. But when the mix up is somewhere in the middle of the course and you do not realize it until after the course is setup you need to redo it.
Does the harvester - unload course work for the BGA and for my Krone Big X? I don't want it to just stand around while i drive to the BGA myself (so i'd like to have a 2nd driver)
you can try but there are some full actions not yet working from 17. I have not tried myself
Hey there. Can you make a videos on auger wagon unload using courseplay
Last I tried using an auger wagon didnt work it would throw lua errors
Hey mate can you make the tip trigger route. Like from field to silo n unloading. I'm unable to get that. It never stops at the silo but just drive over even though I've put up a tip trigger on the silo. It just unloads after exiting the silo n dropping on the ground. Can you make how to set up this route.
U shouldent need to manually set up a tip point. Just drive over it as straight as possable and try slowing down abit it may fix the problem or your own tip off point may be the problem. Also check your working mode, If u empty a harvester use combi mode if not use grain transport mode.
Hi Farmer K, When the harvester was having difficulty lining up with the trailer to fill it, on the previous course play we could adjust the distance that the trailer was from the harvester, to shoot the grain into the middle of the trailer, is this option still available?
It may be, In my own game play I use CP for some functions but I do not make extensive use of it like others. So some of the more finer fine tuning aspects I have not run across that is old hat for others.
will it unload crop on a simple a to b route...im having issues with that?
i hope you see this but iam having an issue with the unloading after the trailer is full of product.
it seems to tip the trailer but freezes in a never ending unload sequence. looks like its unloading but the number doesnt go down just sits there. ive tried different modded silos, modded trailers, anything i could think of. do you have an idea?
I would say just download the newest release of courseplay and see if that corrects the issue. It is an ever changing thing at this point and you might have gotten a build that had something broken.
@@FarmerKlein i actually thought i downloaded the new one. Ill have to see about doing what ya said and try a fresh download. Thanks for the reply. Love the videos you cost me money i had to buy fs19 haha
If anyone could help me figure out how to get 2 combines to share and harvest the same field, I can't seem to figure out how to make it work
The only thing I can get it to do is off load Harvesters.. tried useing it in field work mode with a loading wagon to pick up windrows, and go dump at silo. But it just drivers right by the silo without dumping. I have your video running on my laptop right next to me doing what you are, step by step, But dose not dump.. Help Please.
If you have not updated courseplay please do so it might have not worked in the version you have. With this being early development things may break that used to work or things that where broken before start working with an update.
Farmer Klein I’m having a problem trying to get Courseplay to unload a Harvester with a Tractor and Trailer and take the crop to a silo or a sell point. I’ve recorded the course from field to destination and back for the Tractor and Trailer. I set it into Combine Mode and hit start but Courseplay shows a little error on the bottom that it’s the wrong trailer for this mode. I’ve never seen that before and am
Just using a regular Tractor and Trailer so don’t see how it can be incompatible, especially as I can go and manually fill the trailer from the harvester and take and tip the crop myself.
Its better to set jim up to do circlres araund Field an then stripes
I have a problem, maybe someone can help me? When I have cut down, straw, hay or grass, and I want to pick it up with a trailer, it will not empty automatically at my farm, return to the field and restart picking up. I tried all "modes"
Could you do one on grain transport mode? I am having trouble getting it to work. I want to go from my farm silo to sell points.
last time I tried it didnt work so in waiting till they get that working. it's not filling at the silo for ne.
@@FarmerKlein ok thanks.
You do very good tutorials.. I can't get my Seeders to re-fill from anything but the pallets, With or with out courseplay, It don't matter.. How did you get it to work ?..
Im new to farm sim series as 19 is first time playing...can you turn off the lines showing your course if you just wanted to sit back and watch equipment do a field?
yes, I think it's under the gear icon, you can show all, start, end or none
Thanks! Nice!
A problem I'm having is when the truck/tractor goes to the combine to load it runs into the combine every time. Any ideas on what I'm doing wrong?
I fixed that by setting the horizontal offset to a number slightly greater than default. Easiest way I found was to get in the truck (That is unloading the combine) as it is approaching the combine. Watch the truck approaching and click the Horizontal offset higher until the truck is just about to clear the header. This is especially useful for using mod headers that are different from the one intended. I am a fan of the Midwest 50 foot header.
Could you help me set up a course with a auger cart and Wilson semi trailer
Auger wagons last I tried didn't work with cp. They tossed all kinds of lua issues and the double hopper trailers where also not recognized correctly.
Ok thanks
Why is it evertime I try to have the tractor unload the combine, after combine gets full and the tractor rear ends the combine every time and never unloads the combine. I just recently downloaded the mod and learning more about it, not sure why this happening
Sou is like it's not recognizing the need to offset due to the pipe. Be sure your in the right mode aside from that check if there might be a courseplay update.
Thanks for the video
Could you make a video of tractor backing up to a trigger to unload a trailer.
There isent really any diffrense in that. The main thing is to make the tractor and trailer to be as straight to the unload point as possable before u start backing up to the trigger.
How can you find the right combine if you have more than 1 of them?
In theory you would look at the distance numbers. If they are moving hopefully you can tell by the distance if your selecting the close or the far one for example.
Can't get the auger wagon to unload as we used too 😐
auger wagons do not yet seem to be implemented.
@@FarmerKlein yeah gutted about that. Hopefully in the next update.
Hi there farmer Klein . Got a problem with my coursplay . At start of the game is SAYS do you wana let cp scan fields / i say yes , then it asks you about payment , i say yes ,...then in game i can,t activate it neither by right mouse or del button . THE big Q is WHY ?
dabija Laurentiu florentin I had this same problem, I just downloaded the latest version two days ago and works like a charm except in two places, no sugarcane yet and I have a mod grain truck that sucks my money dry. So try the updated version and see.
still having a ''tip trigger reached '' error when trying collect hay/straw with 2 combined courses, it's a reported issue, let's just wait and hope for the best!!!!
In my testing before i recorded the video i had the issue as I mentioned in the video where the driver would stop when it was transitioning between the field work course and the unload course. i jump into the tractor and jump out right away and the driver takes off to run the unload course. he would then return to the field and get back to work with out intervention but just the transition from field work when the trailer was full or the seeder/fertilizer was empty did i need to get into the tractor to have the courseplay driver continue. I did witness once in four trips the driver not unloading but going through the hayloft trigger. all other times they stopped.
@@FarmerKlein dude, farming simulator really doesn't feel the same without courseplay, particularly on 4x maps!!!
Does anyone know what the best way to get an ai to fill up a slurry tanker and then drive to me in a field so I can refill my tanker using the one the ai drove over to me and then they head back and refill again and repeat that
HOW DO I UNLOAD SOME DUMPER FERTILIZER FROM MY TIPPER. THIS IS ANOYING. CANT DO IT
How do you update courseplay? Do you have to uninstall the old version, and would you lose all your saved courses?
I would like to know this as well, maybe a video telling us how?
courses are saved in their own folder in you Farming Simulator 2019 folder (where your save games and mod folder is located) TO update it you just download a new clone from the github and repeat the steps you did the last time you downloaded it to unzip the clone, zip up the files in courseplay-master and then rename that zip to what ever the zip is currently named in the mod folder and drop the new file in the mod folder replacing the old zip. If you wish to keep a copy of the old zip just move it out of the mod folder before you drop the new one in. Be sure to name it exactly the same. as you do not want two copies in the mod folder at the same time.
Brilliant, seems simple enough thanks. Great videos as well by the way.
Farmer Klein, Has Courseplay AI been changed to avoid running into the wheat when emptying the combine by only unloading when the pipe is on the off side to the wheat? or was you just lucky on both occasions, or did you cheat with the video? Will the tractor always avoid the crops, or does is mess up as the older ones did.
The CP AI does do a better job now at detecting crop on the field and does attempt to avoid driving on it. will it always avoid it. probably not but it will try.
Does refilling work with two tank implements? Like a seeder/fert combo?
I did not try this but it should work. just do a fill loop around both fill triggers and be sure the fill triggers are apart enough that the driver will exit one trigger before it enters another.
Hi farmer klein, i use courseplay and when i try to use it in overloader mode the icon does not come on what am i doing wrong thanks Daryl
It sounds like maybe that functionality has not been enabled. Be sure to have the most recent version from github. I have used courseplay so little over the last several months myself I have not used that feature.
@@FarmerKlein thanks farmer i downloaded another version on sunday but have not installed it yet, will i have to delete the other version first or can i put it over the other one
Which map are you playing in this video? I like how it looks.
The base map ravenport...
Great video. Thx
i dont see the generate course button and i have the latest mod version , can you please help? the hub and all seems to be working but i dont see the gear button to generate a course
They moved the button to the other screen. the one where you would start recording a course
@@FarmerKlein Okay , Thank you very much , both video and your comment was very helpful , subed and liked the video ! :)
For me Combine dont wait for Full unload on the end of field, just start revers and crush with tractors :(. Sorry for my English:)
you need to stop harvester when unload at menu
Where can I search the lastest version of that mod?
Search Courseplay on github.com
hi farmer klein what is debug channels in courseplay fs19
never used them. no idea.
Thanks again! Question, does course play work in MP?
I would say no. I never had luck with it late in 17 with MP when they stated the lateer development versions did support MP. It always seemed to toss LUA errors for me.
Your AI driver backs up a trailer better than most real people can lol
amazing video dude
Did you know you can use this on contracts too?
Of course you can.
Yes I like it
Trying to harvest cotton with the cotton harvesters, both vanilla and from the JD cotton DLC, will break the game using courseplay 6. Tried it on every map, new download, no mods other than newest version of courseplay6, tried with and without John Deere cotton dlc. Always the same. Complete loss of the worker, can't dismiss worker, can't esc. Can't access anything, have to end task in task manager to get the game to stop.
nice job!
where to download the seed tank mod?
The mod hub
What is the name of the mod that refill seeds?
Not sure on the name but they are in the giants mod hub.
how do i update the mod. do i remove what i got and put the newer one in
yep. just delete the mod or just place the new mod in the mod folder with the same name and overwrite.
@@FarmerKlein does it remove your saved courses?
Saved courses are stored outside the mod so there is no risk of having your saved course get deleted when updating the mod. There may be instances where a past save course is no longer comparable with a new version of CP but they wont be deleted unless you delete them.
@@FarmerKlein awesome thanks for the help
So I have a good video idea for you, man...how to get 2 harvesters working in the same field at the same time lol I play on Western Australia which is a massive map and it takes forever with just harvester going
I have that planed when ever they get the auger wagons working in CP. I intend to do a multi harvester with multi auger wagons to a semi that then hauls the grain off all via CP but right now it blows chunks as soon as I set an auger wagon off on a course.
@@FarmerKlein ahh alright, well I'ma be looking forward to seeing that one then lol that'd be a tremendous help on this big 4x map
@@0007Robert yo haw are you ausy farmer ! need coursplay ? mee to .