Not bad for a rook😊. I like working with the router a lot, and have noticed a lot of folks don’t go the correct direction. It’s also opposite when using a router table, since the router is upside down. Love the channel. BTW, I got the “free” stand with the desalt planer, and it has two fixed wheels which you really can’t change to swivel wheels. So it is a pain in the neck. My next shop build will probably be a miter saw cabinet, but one day I may replace that one too.
DFW Tool Works has a juice groove cabinet scraper if if you’re interested. I have one and it sure helps remove those burn marks and reduce the sanding. Take a look at it. Oh, I don’t work for them.
Have other woodworkers say when routing for the juice groove 1) slow the speed down on router, maybe start at half speed, then step up speed as needed. 2) Always move router in the same directions as the bit is turning. In other words, if bit is going clockwise, one routes the juice groove clockwise. 3) Rout out the juice groove depth in steps, don't rout too deep this first time around, make several passes. Gives a better finish without too much sanding if any. Hope this helps out.
Great cutting board great video you think you could tell me what the length ends up being and the width of the boards I really appreciate it and my wife would too thank you
Obrigado parabéns pela sua atenção e vontade de mostrar como é que faz assim é o nosso dia a dia aprender e ensinar aos outros você é de Deus abençoe você
Not bad for a rook😊. I like working with the router a lot, and have noticed a lot of folks don’t go the correct direction. It’s also opposite when using a router table, since the router is upside down. Love the channel. BTW, I got the “free” stand with the desalt planer, and it has two fixed wheels which you really can’t change to swivel wheels. So it is a pain in the neck. My next shop build will probably be a miter saw cabinet, but one day I may replace that one too.
Very nice cutting board. That table saw is a real security issue though.
1st time seeing your video good job
Beautiful board
Thank you! Cheers!
Nice! I'm always looking for new ideas. Keep posting your work. 😊
Your work turned out excellent. I will try to copy your project.
Thanks
Marcus 🇧🇷
Your cutting board turned out really great and very beautiful.
Thank you! Cheers!
DFW Tool Works has a juice groove cabinet scraper if if you’re interested. I have one and it sure helps remove those burn marks and reduce the sanding. Take a look at it. Oh, I don’t work for them.
you never mentioned if you "popped the grain". Makes a huge difference on an end grain board.
Can you share the what the original lengths of the cut boards were? And the final dims of your board? Nice job !
Very nice! What were your starting dimensions? How long were your boards?
Very nice board. Like your flattening process too. I don't know why you did the same mistake that you did on the honeycomb board?
I been looking for places to buy rough cut wood and can’t find a good one. Where do you get yours? Thanks for all the great videos. Big thumbs up.
Parabéns pelo seu trabalho ficou linda a sua tábua
Have other woodworkers say when routing for the juice groove 1) slow the speed down on router, maybe start at half speed, then step up speed as needed. 2) Always move router in the same directions as the bit is turning. In other words, if bit is going clockwise, one routes the juice groove clockwise. 3) Rout out the juice groove depth in steps, don't rout too deep this first time around, make several passes. Gives a better finish without too much sanding if any. Hope this helps out.
Great cutting board great video you think you could tell me what the length ends up being and the width of the boards I really appreciate it and my wife would too thank you
Sorry it took me so long to get back to you. But the board ended up being about 12 in by 22 in.
@@TheRookieWoodworker that's okay thanks for getting back to me I appreciate it
What were the initial walnut and cherry lengths that you cut with the miter saw?
Obrigado parabéns pela sua atenção e vontade de mostrar como é que faz assim é o nosso dia a dia aprender e ensinar aos outros você é de Deus abençoe você
Привет бро, отличная доска вышла,👍 скажи мне какая толшина и ширина досок при склейке?
You could or accomplished this without waste at all if you had made two separate batches and combined them together.
You are definitely right about that.
Knee pads or a table :-)