DOLPHIN XP-005 -TIBBE KEY (DECODE & CUT)
Вставка
- Опубліковано 12 вер 2024
- DONATIONS/DONACIÓNES
Cashapp: $paymemoneymike
Paypal: paypal.me/mike...
JOIN OUR MEMBERS CLUB
/ @mykeysautomotive
PERKS:
COMMENT REPLIES,GIVEAWAYS, MEMBERS ONLY COMMUNITY IMAGES & POST. EMOJIS & BADGES!
Thank you all for supporting our channel from day 1 ! We have really came a long way from where we started! We strive to give you the best information with the best content you can find on youtube!
If you want to keep supporting our channel
You can always donate to our channel!
Oh hey hang on just a minute. Really. You did a Tibbe key video. Learning how to do these keys is a bitch. My clamp has a huge circlip which covers over the lightest of marks they say you should use to align with the numbers for different angles. Don’t know if my clamp is a copy or what. Just you can only see the numbers with a head torch and full tilt. Then you just don’t know if they are perfect or not. Feels glitchy. Like possible dust got in a causing duff readings. Very bad clamp.
I say this after 5 attempts yesterday to do one customer key. Did the key flawless. Worked in his ignition and new door lock without a problem. With this clamp easy to get problems.
Logic says to remove clamp then adjust the mark at eye level. So you don’t push down on the arm holding the clamp. But if you do at some point you can’t undo and slid out because the stopped cutter blade prevents it. When the cutter and clamp touch so electricity pass through and that screws up the software so the program fails. Key ruined and you have to start again.
😁😂
Yes this is the famous tibbe key alot of people dont want to comfront and tbh I avoided for a whole year until i finally bought the clamp i needed! The m3 with the 3a tibbe jaw .. thank you for sharing your experience!!🙏🏼🙏🏼🙏🏼
Also position 4 if you line the inner mark with a ruler it’s short of lining with pos 4 perfectly. So until u learn it real good like me, you have to waste key blades. Now I’m the master of these keys. The clamp should have a spring loaded locating pin. All bullshit eradicated.
Hahha thats right!!! 👑👑👑🙌🏼🙌🏼🙌🏼
thank you my friend for another great video very informative.
you are one heck of a nice guy thank you for what you do!
Thank you brother for the support 🙏🏼❤️❤️
Cutting this with a trition is way easier. But the trition doesn't decode it. Have to buy a tibbe lishi for the bitting as I was off on the sight reading and it worked in the door but got stuck in the ignition took 1 hour to get it Un stuck. Once I lishi got reading and used that bitting it worked perfectly.
Dangg ... when i made the key it got stuck just a little but i brushed it with the nylon brush and wammo! Worked like a charm
@@MYKEYSAUTOMOTIVE there is a dust shield on the ignition if it is cut wrong which mine was. It gets stuck bad.
Ouchh.. ://
Gracias por el vídeo ...pero esas llaves muchas veces hay que leerlas a ojo .por el desgaste de la llave es difícil ...viendo la llave diría que no la decodifico bien ..pero la máquina de corte y vvdi Max me parecen genial.un saludo y abrazo desde España .tus vídeos inspiran y ayudan ....
La llave me sirvio muy bien! Gracias amigo saludos!!
This key a little hard !
Yes a bit
Hey! I learn a lot from you. I'm queuing up for these tools and am new to this. I have bought key tool max and mini obd tool. but what cut machine do you think I should get. Is the DOLPHIN XP-005 a good choice for a beginner? thanks for these great videos
Get a trition
@@mattlebrun56 what is it?
Good key cutter machine. Is a little more money but in 1 year you won't be trading the dolphin back in for the next step up.
this works with my xhorse key tool max? as the dolphin does?. do you have a link?
Hi! have you ever change any spare parts of this machines since you owned it? If the belt broken, can we replace it? where can we find the spare parts to replace it? Great video! Ty
Not yet!! Spare parts would probably be found on the Xhorse website or from china where the machine is made
@@MYKEYSAUTOMOTIVE Thank you from Brazil! I'm learning alot by watching ur videos. Keep up the good work! Ty
Gracias Mike,buen video.
se merece de comprarlo?es q ya no hay muchos autos con este llave.💐
No no hay muchos .. es buena para llaves de candados y llave de carros con doble filo.. esta bien
Bro pls suggest me which key cutting machine best xhorse xp005 or xp005l pls reply
Xp005
good job
Thank you! Cheers!
Where are you guys getting your Dolphins?
Brother,how to add or include new data that we need into machine/menu something like motorcycle data.thank's
Sabes me paso lo mismo
Creeo que tenemos mucho en comun y me gustaria contactarme con tigo para compartir ideas y conocimiento
Estoy en Santa Clarita
Espero ti respuesta gracias
Hola si amigo yo estoy en Pacoima! Mandame un email! Mykeysautomotive@gmail.com
Gracias thank's
Great Video Mike
Salvador thank you brother!
Great job 👍
Thank you brother!
What’s the best way to decode or get the key code on new Hyundai with the lx90 blade
Lishi!! 100 percent!! I usually just order the keycode they are super cheap! Like 22-25$ from magickeycode.com
@@MYKEYSAUTOMOTIVE I can’t use magic key code yet because I don’t have my business license 😐 which lishi is for lx90 blade
@@335135 i believe thats the same key as the toy40
And toy48
@@335135 heres the link to the lishi!! locksmithstore.com/mr-li-original-lishi-2-1-pick-decoder-2-1-hy22-hyundai-kia-lxp90-p-4-track-lishi-2-1-hy22-00.html
@@MYKEYSAUTOMOTIVE thanks….I see UHS has a aero depth key set wut do u think of those
💥4 EHT MHTIROGLA 👍
🙏🏼🙏🏼🙏🏼❤️❤️
hi sir grate video am one of your fans please is there any way i can make smart key for Elantra 2017 part number F2000 with transponder DST 128 by VVDI or KD your reply higher Appreciate please sir
I only reply to members my apologies!
@@MYKEYSAUTOMOTIVE I already subscribe in your channel sir
Key tool max under ford transit connect gives you SO21 blade. On key company websites they all say it’s FO21 blade. 😂 China.
😟😟😟 it's probably a compatible key!!??? Well they are chinese machines .. 😆
@@MYKEYSAUTOMOTIVE I want a manual key cutting machine. Then I can avoid situations like I had with HU46 blade. The probe decoded the cuts. I looked at the pic on screen and all ok. The cut though in my only hu46 horse shoe Zafira blade was nothing like the original. It ruined the blade. Had I had a manual machine I could have repaired it. Second attempt with fingers crossed whilst in the customers car park of the repair garage failed. Destroyed the blade.
Oh wut 👀🏋️
Ohhhh whuuuuuutttt
90 por ciento Inglés. 10 español
Disculpa amigo .. le estoy echando ganas.. a no tener nada de espanol esta bien...
For a person that knows Spanish and English, this gets annoying 🤦♂️. I can't listen to a whole video with you going back and forth. It gets confusing.
Sorry brother it is what is..