Don't be afraid. To be honest, this lockpick method requires a lot of skill, practice, patience, experience and a very great chunk of luck (to be not seen nobody while the attacker is messing with your lock). And the attacker should exactly know your lock location, he/she should know your/your family routine, the neighbours, surroundigs because of the security cams, etc etc. You're not going to be robbed I assure you.
I remember how I got here. Someone I work with uses one of those Car Club devices and I wanted to show them how easy it is to bypass. It's even easier than I realized. My coworker does not care and still uses the stupid thing. You can lead people to LPL but you can't make them understand what they refuse to see.
@@niccatipay in fairness the bypass has always been there. The old way they fixed is slower but more convenient as it let's the attacker recode the lock
"This is the LockingPickingLawyer and what I have for you today is the lock to the county jail cell in which I am currently being held. I'm here for reasons I'd rather not discuss, but it does provide the opportunity to show how easy it is to leave my cell. [Proceeds to unlock the door with a shiv he made earlier from his cellie's toothbrush.] As you can see, this particular cell is not secure. And now, on to picking the next lock to exit this tier, which I will show you in another video. That's all I have for you today. If you do have any questions or comments about this, please put them below. If you like this video and would like to see more like it, please subscribe and as always, have a nice day. Thank you."
Funny thing about that, aside from actually going to jail. He has picked quite a few jail cell locks. Lol Suffice to say if he ever does go to jail, dont let lpl get his hands on a bic pen, hair pins or a coke can or hes going to pick every lock in the place.
I just picked my first real lock 5 minutes ago with your advice on tensioning. An old russwin core we replaced on a job site. I was just really excited and wanted to share and say thanks :D
Thank you for this video. The Condo next to mine is vacant and recently had some work done to get it ready to sell. The workers left the A/C on and the condensation water didn't drain properly and began to leak to our side of the wall causing damage to carpet and sheetrock. When it became clear that my attempts to contact someone with access to the unit were a waste of time (as the water continues to do damage) I called the police and asked if they would supervise me "Breaking in" to resolve the issue. They did not give permission for me to do so, neither did they watch me "Decode and enter". But I was able to get in indescructively and turn up the thermostat to a level where the drain could keep up with the condensation from the coils. About a week later I did get in contact with the owner, who offered to pay for the water damage caused and promised to take care of the problem.
Wow! I've had one of these locked to a pole at my house since I bought it 8 years ago. You inspired me to try picking it. I've never picked anything before in my life and I was able to open this thing after about 8 minutes of fiddling. Crazy! Thanks, LPL!
I like to imagine his victims hear their imminent doom on the other side: "Back to 1. Click out of 2, I'm coming for you! 3 feels set. Nice click out of 4, weak lock on this door! 5, 6, I could easily rake this! 7, 8, Have a nice day!"
Wow, this saved me. Not having lock-picking tools, I fashioned a suitable tool from a tin can. It took some trial and error to trim the hook down to the right size. Once it was in position to pull the fork, it took just seconds to determine the code.
When we bought our house it came with a little wall-mounted one of these beside the front door, but the previous owners didn’t know the combo. We didn’t want to rip it off and damage the wall so we just left it there. Recently we finally had a need for it but the locksmith I called was less than useless (said he'd "look into it" then ghosted me). Your video was perfect for helping me visualize exactly what I needed the lockpick to be doing and once I figured that out it took less than a minute! Thank you so much!
This is my first comment ever on youtube and I'm sure you'll never see it.. But i felt the need to thank you so much for this video. I've been trying to learn to decode using these lock boxes and was wondering why I had such a hard time getting decent feedback with this lock. I was unaware of the lip they added to make it harder to decode. I wish i could find an older model without the lip to practice on. This method works wonder though! Thank you for all you do. You keep me motivated with each video you put out there. Times are hard for me right now and locks are my escape. So thank you. Your videos help me in more ways than you know.
First time I’ve done this...out of curiosity, I checked online reviews for this lock and was amazed to see so many 4-5 star reviews for it’s solid design and peace of mind this lock gave them, knowing their keys were safe. So tempted to write a review and simply put a link to this video.
I know you’re kidding but masterlock doesn’t care. They know their products are shit, but I’d bet money they provably sell more locks than any other company. The vast majority of people don’t know they’re junk, so Why fix it if it sells anyway?
The unfortunate truth is that they don't have to. People think it's secure and simply don't know the truth. There need to be more LPLs with the same reach so people will demand better locks. My boss eg wasn't away that his door wasn't safe simply because he uses dimple locks. "Those can be picked, too?!" "Yup, you just need different looking picks". Completely blew his mind.
GR Wolf In this rare case, they did learn from their mistake. Master lock just has many more mistakes to learn from. But adding that lip was a surprisingly good start given their past performance.
@@saschaschneider6355 Reminds me of my boss saying he did not need me to take photos (trained photographer). He would just let this other idiot do it with no training because he baut a $10,000 camera so it will take good photos.
@LockPickingLawyer Thanks for a great video! I had a lockbox mounted on the back porch of my house since I bought the joint 5 years ago and I didn't know the combo.. With this tutorial and a curved pick in .015, I was in the box in 40 seconds. The box is now removed and combo is reset to 0000... Thanks LPL!
THANK YOU, @lockpickinglawyer! I have a lock box, and lost the code, and this was the best advice I'd gotten. As far picking some other locks... well, let's just say it's been an example of the difference between "simple" and "easy".
I had two of these that were somehow abandoned by our condo builder and a real estate agent attached to the common element gym door. Using this video I was able to pick the lockbox and retrieve the common element keys inside. The boxes have been removed from the door. Ahhh... that looks nicer!
FINALLY!!! A VIDEO THAT OPENED MY LOCK!! Man.., I have tried SEVERAL videos. This one: SHOWING the internal parts is what I NEEDED! And, right this very moment.., the FIRST attempt opened it! That's all it took! THANK YOU. I am now a Subscriber!!
@@googlepixel9pro There is a lock he currently hasn't been able to pick (or at least, hasn't shown us yet if he has), it's the bowley lock that he talks about in 636
Whoa thanks LPL! Had an one of these laying around my family’s business for a few years now. No one knew the code so on slow days I would mess with it, putting random numbers in but never got it open… until today! I cut off a part of this flat hair clip thing and did exactly like LPL explained and got it open in 30 seconds. Probably one of the most satisfying feelings I have ever had. 1112… can’t believe I never tried that one lol
Much obliged lol landlady asked me to get into the one outside the building. I've done a couple of padlocks for her before. Saved me time and her money on a new box :) thanks!
Thanks, great video. Bought a new house with one of these already fitted. Didn't have the combination but didn't really want to be smashing it off the wall. Followed your guide on here and got it open!! Perfect.
Thank you, my box was open bouncing around in the service truck pin was bumped and wheels turned, good bye combo. I was able to push the locking bar in with my fingers and turned dials to loose spots. Cheers
@@DaMonkfish he didn't need the shim before, he didn't make it super clear in the video but he said in the comments here that they all have that bar, it's not something that has only just been added
@@gigemags087 I bought the Peterson Gem - Stainless 0.015 Slender. I am fairly certain that its the lockpick used in the video but it might not be. It DID work though.
I have bought one of the wall nounted ones a few weeks ago with the sole purpose of trying to decode the thing this is an awesome Video to show how it's done, thank you
You are a wizard and a saint. I now I have a free lock courtesy of my rental company that refused to take it off my door. Not that I’ll have a reason to use this highly insecure lock that I would of thought was secure till today. Added bonus though I don’t look like I’m squatting in my own house.
Thanks so much. As a retired RE/MAX Realtor of 25 years, I have accumulated a few of these that had combinations that were useful at the time, but long forgotten. Now they are useful again.
Reality check! This is the Lock Picking Lawyer, and today i have for you a lock.....and goes on to show us that it's not really a lock at all. Yet again we find ourselves hyptomised by those soothing tones and entranced by those mysterious unknown hands who's scope is broad, and skill is deep. We thank you LPL for the joy and knowedge you bestow upon us.
I saw one of these on a renovation job once. I opened the box the long way (calling to get the code) and to my horror, a Mul-T-Lock Interactive+ was waiting for me inside. The absolute duality of security on that door has haunted me since
The problem is knowledge of how easy it is to pick a lot of there products is not known to the overwhelming majority of their potential customers so they are probably not over concerned
Nah. They sell with their name which sounds promising for consumers. Cheap to make tolerance side, name to sell with decent price=Nice profit per sold lock=Happy management
So I couldn’t remember the code and I had to break into my own lock box. So I watched your video, and since I don’t have a pic I had a broken coping saw blade that I sanded down till it was thin enough and was able to decode the numbers using your technique. Boy security theater sure is fun! Thanks for the video!
Omg thank you so much! This real estate agent left their lock box on the railing in front of our door from before we owned the house, and never came to pick it up. I got so sick of it, I watched this video and was able to pick it in under 5 minutes... Now I definitely don't trust this lock box lol
@@Adrian-dl9nb those thin picks are referred to as "european profile" picks...if you enter that term in your search engine, you'll see that there more than a few companies that market them, and not many will ask for a locksmith license #...just shop around... 😉👍👌
I love that these videos are so short! I wouldn't watch them otherwise. LPL has a really good video-making formula!😉👍 He's made me interested in something I'm not interested in LOL
Thank You! You save my safe for keys :) I tried brutal force two hours, your method one minute :) i haven't tools, but i bought feeler at 3$ and use 0.3mm leaf, thank you again :)
@@orangensirup5539 The Abus 787 is a far superior design. Whilst not impregnable, the security features have been well thought out and offer a considerable challenge to even professional locksmiths.
LPL: I have another master lock to show you. Me: Stop! It’s (master lock) already dead! Man you have been racking up the videos on master lock here recently.
Funny timing. We visited a friend last night and there was one of these on the entry gate to the complex. As my GF was waiting for someone to buzz us in I said "I could probably open that lock more quickly". "Probably" as she chuckled.
After not getting anywhere with home made picks, got my wifes small metal nail file with cuticle hook, used tin snips to fashion a pick about 3mm wide with cuticle hook at end. The 3mm wide bit needs to be about 20-25mm long and connected to the rest of the file body. After cutting with precise tin snips had to flatten and straighten DIY pickwith hammer on flat metal surface. Secret to use pick is to get under bar and push up and pull towards you. Didnt work until I realized need to use left Wheel adjacent space to pull bar against number wheels. If pull firmly can almost stop each wheel from turning and then when get to the correct number everything seems to jump wth wheel and pick falling into position. If put hook into other wheel slots not as easy to identify correct number.
But they have name recognition. Master is, for some reason, very popular. So when people try to search for if their lock is safe, they'll probably be searching for Master locks
it was close to the correct combo, and pulling on the bar simply aligned all the wheels. im not sure how far away they can be though, maybe half a number?
Four years later and this is just as easy. My reno contractor used one and even without tools i opened it and took it off the door and told them to try harder. I should've changed the combo and sold them the new code.
Thanks LPL. We have a bunch of these exact model at work and I'll suggest to my boss that we only use them in hidden locations such as inside meterboxes. Where there is no good location to hide them we'll use our Abus ones which seem a lot better made anyway.
"Sure, Master lock tried to address the old vulnerability, but here's another one that works even faster"... gotta love it. You'd like to think that any decent lock company would have a group of folks that try to explore exploits on their product offerings so that they could be addressed before making it to market! Apparently some companies are better at this than others... I suppose any security measure is just a delay, but you hope for more than a minute!
After all those videos I have seen about master lock, I am really confident that design engineers of master lock, always leave on purpose a back door in every master lock !!!
I’m a fan and have been watching since the beginning. I would like to see a video or video series that outlines the most stout and difficult to pick and or impossible to pick locks. That would be fun! Thanks!
Before watching these things, I had relative comfort and only a slight paranoia issue. Now thanks to LPL, I weld my door shut every time I leave the house!
I'm a part time burglar and every time I run into a lock I just see if theres a video on it. Just scored some gold, birth certificate and a pistol, thanks LPL!
![[479] The Master Lock Paradox - Model 410 LOTO Padlock](http://i.ytimg.com/vi/y4XGY0_cwcM/mqdefault.jpg)
![[479] The Master Lock Paradox - Model 410 LOTO Padlock](/img/tr.png)
![[1289] This Lock Is Indisputably “Pickproof”](http://i.ytimg.com/vi/qqL7wTu5IEk/mqdefault.jpg)
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
I have these and I am scared now... but then they only contain the keys to other Master Locks... so I was never secure to begin with.
@Dave Klonpenberg definitely. If you keep your keys in something it'd better be the strongest lock in the entire house
This is pretty good
Don't be afraid. To be honest, this lockpick method requires a lot of skill, practice, patience, experience and a very great chunk of luck (to be not seen nobody while the attacker is messing with your lock). And the attacker should exactly know your lock location, he/she should know your/your family routine, the neighbours, surroundigs because of the security cams, etc etc. You're not going to be robbed I assure you.
@@peha688 sounds like you're planning on robbing them
@@peha688 Because YOU aren't anning to rob him ? TBH, you sound like you may know all those things about someone
Ah the LPL. The channel that none of us know how we came across, but we are all so grateful that we did. Love you mate. Let's get that 1 mil.
Yea, there is something mysterious about how people stumble onto this channel
@@Olvenskol It really took off after he did the April Fools Day vid.
I got his videos recommended after watching talks from Deviant Ollam.
I remember how I got here. Someone I work with uses one of those Car Club devices and I wanted to show them how easy it is to bypass. It's even easier than I realized. My coworker does not care and still uses the stupid thing. You can lead people to LPL but you can't make them understand what they refuse to see.
@@ronin181990 Same.
Master lock: we’ve added a new security feature
LPL: ...and the bypass for this is now even quicker
New feature = new ways to bypass
niccatipay the bypass IS the feature, in a company like Master Lock
MasterLock, like Mr.Trump, can only advance by walking something else back.
Master Lock: We hate you. LPL! LOL
@@niccatipay in fairness the bypass has always been there.
The old way they fixed is slower but more convenient as it let's the attacker recode the lock
"This is the LockingPickingLawyer and what I have for you today is the lock to the county jail cell in which I am currently being held. I'm here for reasons I'd rather not discuss, but it does provide the opportunity to show how easy it is to leave my cell.
[Proceeds to unlock the door with a shiv he made earlier from his cellie's toothbrush.]
As you can see, this particular cell is not secure. And now, on to picking the next lock to exit this tier, which I will show you in another video.
That's all I have for you today. If you do have any questions or comments about this, please put them below. If you like this video and would like to see more like it, please subscribe and as always, have a nice day. Thank you."
I don’t know that a prosecutor is eligible for county, it’s in their immunity clause in their contract. lol
🤣🤣🤣🤣
Am I the only one who read this with his voice? LOL
Funny thing about that, aside from actually going to jail. He has picked quite a few jail cell locks. Lol
Suffice to say if he ever does go to jail, dont let lpl get his hands on a bic pen, hair pins or a coke can or hes going to pick every lock in the place.
You mean shim. A shiv is a handmade stabbing tool.
I love how all the code wheels pop into alignment at the end... it's like the lock is happy to tell you the combination
I just picked my first real lock 5 minutes ago with your advice on tensioning. An old russwin core we replaced on a job site. I was just really excited and wanted to share and say thanks :D
Thank you for this video. The Condo next to mine is vacant and recently had some work done to get it ready to sell. The workers left the A/C on and the condensation water didn't drain properly and began to leak to our side of the wall causing damage to carpet and sheetrock. When it became clear that my attempts to contact someone with access to the unit were a waste of time (as the water continues to do damage) I called the police and asked if they would supervise me "Breaking in" to resolve the issue. They did not give permission for me to do so, neither did they watch me "Decode and enter". But I was able to get in indescructively and turn up the thermostat to a level where the drain could keep up with the condensation from the coils. About a week later I did get in contact with the owner, who offered to pay for the water damage caused and promised to take care of the problem.
If this kind of thing happens again, try the fire department. They're real good at picking locks to get in and turn off water.
Wow! I've had one of these locked to a pole at my house since I bought it 8 years ago. You inspired me to try picking it. I've never picked anything before in my life and I was able to open this thing after about 8 minutes of fiddling. Crazy! Thanks, LPL!
Just imagine how fast he is when he isn't explaining what he is doing.
zeblic About 10 seconds between inserting the pick and opening it up
3-15sec videos would be kind of boring though
I like to imagine his victims hear their imminent doom on the other side: "Back to 1. Click out of 2, I'm coming for you! 3 feels set. Nice click out of 4, weak lock on this door! 5, 6, I could easily rake this! 7, 8, Have a nice day!"
drop zone lol
Worst is the picking movement and timing actually looks like opening the lock in legit way
Wow, this saved me. Not having lock-picking tools, I fashioned a suitable tool from a tin can. It took some trial and error to trim the hook down to the right size. Once it was in position to pull the fork, it took just seconds to determine the code.
When we bought our house it came with a little wall-mounted one of these beside the front door, but the previous owners didn’t know the combo. We didn’t want to rip it off and damage the wall so we just left it there. Recently we finally had a need for it but the locksmith I called was less than useless (said he'd "look into it" then ghosted me). Your video was perfect for helping me visualize exactly what I needed the lockpick to be doing and once I figured that out it took less than a minute! Thank you so much!
Nice! I'm about to use this video for the same thing
Used this today and three minutes later no more annoying lock left behind from the previous owners. Thanks LPL keep up the great work!
Do you have picking tools, or what did you use?
This is my first comment ever on youtube and I'm sure you'll never see it.. But i felt the need to thank you so much for this video. I've been trying to learn to decode using these lock boxes and was wondering why I had such a hard time getting decent feedback with this lock. I was unaware of the lip they added to make it harder to decode. I wish i could find an older model without the lip to practice on. This method works wonder though! Thank you for all you do. You keep me motivated with each video you put out there. Times are hard for me right now and locks are my escape. So thank you. Your videos help me in more ways than you know.
First time I’ve done this...out of curiosity, I checked online reviews for this lock and was amazed to see so many 4-5 star reviews for it’s solid design and peace of mind this lock gave them, knowing their keys were safe. So tempted to write a review and simply put a link to this video.
LPL: uploads
Master Lock: Ah shit, here we go again...
I know you’re kidding but masterlock doesn’t care. They know their products are shit, but I’d bet money they provably sell more locks than any other company. The vast majority of people don’t know they’re junk, so Why fix it if it sells anyway?
It kills me that these ‘lock’ companies don’t learn from their mistakes. Great work Lock Picking Lawyer!
The unfortunate truth is that they don't have to. People think it's secure and simply don't know the truth. There need to be more LPLs with the same reach so people will demand better locks. My boss eg wasn't away that his door wasn't safe simply because he uses dimple locks. "Those can be picked, too?!" "Yup, you just need different looking picks". Completely blew his mind.
They don't care, as long as people don't complain.
GR Wolf In this rare case, they did learn from their mistake. Master lock just has many more mistakes to learn from. But adding that lip was a surprisingly good start given their past performance.
@@saschaschneider6355 Reminds me of my boss saying he did not need me to take photos (trained photographer). He would just let this other idiot do it with no training because he baut a $10,000 camera so it will take good photos.
@@DouglasEKnappMSAOM Some people deserve what they get
"the master lock"
I'd go and get a snack but by the time i got back the video would be over
The lock was toast. Which if funny because toast takes longer to make.
Just pause the video and then get a snack.
😂🤣
Pause it
Been there done that, the toast had hardly gone down and the water wasn't even thinking avout boiling..
@LockPickingLawyer Thanks for a great video! I had a lockbox mounted on the back porch of my house since I bought the joint 5 years ago and I didn't know the combo.. With this tutorial and a curved pick in .015, I was in the box in 40 seconds. The box is now removed and combo is reset to 0000... Thanks LPL!
I am not interested in anything related to locks but I still watch this channel just for that satisfying click at the end .
THANK YOU, @lockpickinglawyer! I have a lock box, and lost the code, and this was the best advice I'd gotten.
As far picking some other locks... well, let's just say it's been an example of the difference between "simple" and "easy".
I had two of these that were somehow abandoned by our condo builder and a real estate agent attached to the common element gym door. Using this video I was able to pick the lockbox and retrieve the common element keys inside. The boxes have been removed from the door. Ahhh... that looks nicer!
where did you get the key shim?
@@Telencephelon I made it using an aluminium coke can and scissors. Took a few times to get it right.
@@ChristianLanctot Did you take pictures? Could you kindly share one?
FINALLY!!! A VIDEO THAT OPENED MY LOCK!! Man.., I have tried SEVERAL videos. This one: SHOWING the internal parts is what I NEEDED! And, right this very moment.., the FIRST attempt opened it! That's all it took! THANK YOU. I am now a Subscriber!!
You are always so quick and to the point. Thank you for that. Keep up the excellent work.
Please do a "Lockpickinglawyer recommended locks" 👍
THIS!
What about a lock which can't or is very hard to pick. If one exists that is
@@googlepixel9pro There is a lock he currently hasn't been able to pick (or at least, hasn't shown us yet if he has), it's the bowley lock that he talks about in 636
Please make your own pickproof lock, I would buy it.
@@XargenTelNada There's plenty of locks he hasn't picked on video, I'd like to see him pick an assa abloy protec 2, for example.
Whoa thanks LPL! Had an one of these laying around my family’s business for a few years now. No one knew the code so on slow days I would mess with it, putting random numbers in but never got it open… until today! I cut off a part of this flat hair clip thing and did exactly like LPL explained and got it open in 30 seconds. Probably one of the most satisfying feelings I have ever had. 1112… can’t believe I never tried that one lol
Much obliged lol landlady asked me to get into the one outside the building. I've done a couple of padlocks for her before. Saved me time and her money on a new box :) thanks!
I literally see these everywhere too. Not I'm going to use this information...
To change everyone's combination 😈
It was you!? Thanks for the headache man. I fixed them now. 😝
Thanks, great video. Bought a new house with one of these already fitted. Didn't have the combination but didn't really want to be smashing it off the wall. Followed your guide on here and got it open!! Perfect.
Thank you, my box was open bouncing around in the service truck pin was bumped and wheels turned, good bye combo. I was able to push the locking bar in with my fingers and turned dials to loose spots. Cheers
Master Lock: "Lets upgrade our system, actually make a better lock!"
LPL: "Heh, 'better' lock... Hold my beer"
More like:
LPL: "Hold my shim, I don't need it now"
@@DaMonkfish he didn't need the shim before, he didn't make it super clear in the video but he said in the comments here that they all have that bar, it's not something that has only just been added
I tracked down the exact lockpick you used and opened one of these that the code had been lost for. Thank you LPL
What tool is it? Thanks.
@@gigemags087 I bought the Peterson Gem - Stainless 0.015 Slender. I am fairly certain that its the lockpick used in the video but it might not be. It DID work though.
LPL - "However, I havr a completely different method of opening this lock"
Me - 🤞*please be a sledgehammer please be a sledgehammer*🤞
ForThe Hord 😂😂😂👍
@@lockpickinglawyer Ramset is more your style. :)
I have bought one of the wall nounted ones a few weeks ago with the sole purpose of trying to decode the thing
this is an awesome Video to show how it's done, thank you
LPL sneezes, every master lock in a five mile radius pops open
...and, every popped lock recombinates itself...
Just wanted to say thank you! Had one of these stuck on the house for a while and was able to pick it using your method to remove it in a few minutes
It took longer to type that comment than unlock this lock
Than*
HUGE ANIME BREASTS
@@KokoroKatsura You are not wrong
owo
Very true weeb, very true
You are a wizard and a saint. I now I have a free lock courtesy of my rental company that refused to take it off my door. Not that I’ll have a reason to use this highly insecure lock that I would of thought was secure till today. Added bonus though I don’t look like I’m squatting in my own house.
Entertaining, and eye openingly educational like all your videos!
Thanks so much. As a retired RE/MAX Realtor of 25 years, I have accumulated a few of these that had combinations that were useful at the time, but long forgotten. Now they are useful again.
Lead designer of new Master Lock: walks into boss's office without saying a word turns in his "employee of the year" parking tag and leaves.
This video just saved our butts at my work. Someone changed the combination on this lock, then quit. Thank you again LPL!!!
Reality check! This is the Lock Picking Lawyer, and today i have for you a lock.....and goes on to show us that it's not really a lock at all. Yet again we find ourselves hyptomised by those soothing tones and entranced by those mysterious unknown hands who's scope is broad, and skill is deep. We thank you LPL for the joy and knowedge you bestow upon us.
I saw one of these on a renovation job once. I opened the box the long way (calling to get the code) and to my horror, a Mul-T-Lock Interactive+ was waiting for me inside. The absolute duality of security on that door has haunted me since
How ironic that the advert shown before this video for me was a master lock one 😂😂😂
It works! Have to do this in my house maintenance job and save me a lot of time and frustration. Thanks a lot!!
Master lock is facepalming in their headquarters once again.
Master lock is not giving a shit in their headquarters once again...
The problem is knowledge of how easy it is to pick a lot of there products is not known to the overwhelming majority of their potential customers so they are probably not over concerned
I know you are joking, but in all seriousness, they know very well that the locks are easy to pick before they ever ship them. So no facepalms.
Nah. They sell with their name which sounds promising for consumers. Cheap to make tolerance side, name to sell with decent price=Nice profit per sold lock=Happy management
Nah, they are at the lower end of the market and know what they're selling is just "good enough".
I never knew I wanted to know so much about locks and picking until I stumbled on this channel
No locks are safe when the Lockpicking Lawyer comes to town
No-one is safe when Master Lock is around.
He is the town's key.
There are some locks he can't open. Bowley are just an example
So I couldn’t remember the code and I had to break into my own lock box. So I watched your video, and since I don’t have a pic I had a broken coping saw blade that I sanded down till it was thin enough and was able to decode the numbers using your technique. Boy security theater sure is fun! Thanks for the video!
I feel like at this point if I sneeze on a master lock it might get unlocked
I have a resettable combo one. I just turn it once and it falls open.
If you sneeze it won't open. If LPL sneezes it surely will.
You have to scare it not sneeze.
Lol
Excellent! I was cleaning my shop and found one of these from one of my houses. I was just gonna toss it, because I couldn't open it. Until now!
My dad used to say “Locks keep honest people out.”
I’ve never forgot that -
Lpl is an honest person but locks don't keep him out.
Omg thank you so much! This real estate agent left their lock box on the railing in front of our door from before we owned the house, and never came to pick it up. I got so sick of it, I watched this video and was able to pick it in under 5 minutes... Now I definitely don't trust this lock box lol
Is this a valid attack on the older ones too or only the newer variants?
eak125 All of them.
Yes!
@@lockpickinglawyer Quick question: The specific lock pick you used - where can one buy one? or what are these tools commonly named?
@@fyvp1234 You probably know this by now, but the final tool he used was a standard lockpick "hook", a very thin one
@@Adrian-dl9nb those thin picks are referred to as "european profile" picks...if you enter that term in your search engine, you'll see that there more than a few companies that market them, and not many will ask for a locksmith license #...just shop around... 😉👍👌
You have the advantage of knowing how it's put together, internally. Thank you.
Lock: *exists*
lockpicks and keys: *we're about to end this whole man's career*
You once said that your videos would be boring if you showed only ordinary locks... But I never get tired of how you destroy them.
Master Lock: "Goddamnit!"
Don't know how I ended up watching your videos months ago, but so glad I did. Keep it up man, always happy to see a new vid posted!
I swear you were going to take a hammer to that plastic body when you said there was a far faster and easier way to get into it....
That could damage the keys inside.
It's not a plastic body. That's a rubberised coating only, it's actually all metal construction at least.
I love that these videos are so short! I wouldn't watch them otherwise. LPL has a really good video-making formula!😉👍
He's made me interested in something I'm not interested in LOL
Masterlock: updates lock to fix vulnerabilities
lockpickinglawyer: ight im about to end this man's whole career
Thank You! You save my safe for keys :) I tried brutal force two hours, your method one minute :) i haven't tools, but i bought feeler at 3$ and use 0.3mm leaf, thank you again :)
I wonder what lock LockPickingLawyer uses to lock his own stuff!
What a savior! I forgot the code to one on my house and used the tweezers off a Swiss Army Knife! Awesome
fascinating, as always. is there a good alternative?
Yes, every other Lock of that kind in existance. Or you can just use a small cardboard box, this will protect your keys even better than this lock.
@@orangensirup5539 The Abus 787 is a far superior design. Whilst not impregnable, the security features have been well thought out and offer a considerable challenge to even professional locksmiths.
Phil S There's also Abloy KD202 if you are willing to make a hole in the wall and it's not a house made of sticks.
Confirmed! just tested this method on one we had at the shop. Nice work as always.
Yooo my parents have one of these for a set of house keys, got any replacement locks you recommend?
Thank you, magically the combination was reset during a delivery and gate key is inside the key box.
Video 9 *69* nice. Either way great video
Very nicely figured out - great job.
Wow, I think I will put one of these on my door and hide my key under a rock instead.
Don't forget to put some keys into it that don't fit any lock on your house for maximum confusion.
@@johnathanmcdoe but of course. 😂
MasterLock upgrade the core and manage to cut the decoded time in half, awesome job as always.
LPL: I have another master lock to show you.
Me: Stop! It’s (master lock) already dead!
Man you have been racking up the videos on master lock here recently.
Brilliant !!, I really like to see the homework and not just the open. Thank you and have a nice day as well....
ML website says 5400D Key Box is,
quote: “ keyless convenience and
increased security.” What’s increased security mean???
Over leaving things in the open, unlocked. I mean, it did take ~30 seconds to unlock this - that's increased over *no* lock.
@@DanStaal I dunno, it probably takes 30 seconds to find a key hidden under a flower pot compared to decoding the not-hidden box on the door.
@@ThePlayListOfPower That would be leaving it *locked,* with the key available. I was saying it's increased over *unlocked.*
Funny timing. We visited a friend last night and there was one of these on the entry gate to the complex. As my GF was waiting for someone to buzz us in I said "I could probably open that lock more quickly". "Probably" as she chuckled.
Think master lock should be renamed to novice lock
Jimbo ... or how about "JustForLooks Lock"
I just love hearing your voice, it's so calming.
"And I'll show you how fast and easy this is"
Well, the video is more than half over......
After not getting anywhere with home made picks, got my wifes small metal nail file with cuticle hook, used tin snips to fashion a pick about 3mm wide with cuticle hook at end. The 3mm wide bit needs to be about 20-25mm long and connected to the rest of the file body. After cutting with precise tin snips had to flatten and straighten DIY pickwith hammer on flat metal surface.
Secret to use pick is to get under bar and push up and pull towards you. Didnt work until I realized need to use left Wheel adjacent space to pull bar against number wheels. If pull firmly can almost stop each wheel from turning and then when get to the correct number everything seems to jump wth wheel and pick falling into position. If put hook into other wheel slots not as easy to identify correct number.
Get yourself a challenge, those Master Locks are a child's play for you...
But they have name recognition. Master is, for some reason, very popular. So when people try to search for if their lock is safe, they'll probably be searching for Master locks
They have name recognition because they're cheap and widely available.
Learned how to decode this lock today thanks to your video!
It almost looks like the lock just flipped to the right combo. That's how bad it is.
it was close to the correct combo, and pulling on the bar simply aligned all the wheels. im not sure how far away they can be though, maybe half a number?
Matthew Shaw I tested this... three dials can be a full number away, and the pressure will snap them into position. 😳
@@lockpickinglawyer Oh great now the lock just picks itself.. Lock: ok why don't we both just agree you picked me already and you just go away.
@@lockpickinglawyer It's ridiculous regardless, but yeah it looked just like the tension pulling the combo together. Keep up the good work man!
Four years later and this is just as easy. My reno contractor used one and even without tools i opened it and took it off the door and told them to try harder. I should've changed the combo and sold them the new code.
"in any case" - Lock Picking LAWYER...I see what you did there...
Thanks LPL. We have a bunch of these exact model at work and I'll suggest to my boss that we only use them in hidden locations such as inside meterboxes. Where there is no good location to hide them we'll use our Abus ones which seem a lot better made anyway.
Master lock?
Pffft
More like Busted Lock
More like Master Lack.
I had forgotten the code on an old one of these, kudos to you, I can now use it again.
Want to hear a joke?
Sorry to disappoint you.
"Sure, Master lock tried to address the old vulnerability, but here's another one that works even faster"... gotta love it. You'd like to think that any decent lock company would have a group of folks that try to explore exploits on their product offerings so that they could be addressed before making it to market! Apparently some companies are better at this than others... I suppose any security measure is just a delay, but you hope for more than a minute!
Just did this on the wall mounted version. 🙌🏼
After all those videos I have seen about master lock, I am really confident that design engineers of master lock, always leave on purpose a back door in every master lock !!!
I’m a fan and have been watching since the beginning. I would like to see a video or video series that outlines the most stout and difficult to pick and or impossible to pick locks. That would be fun! Thanks!
Thanks for the video. It took me longer of course. The free spot wasn't as much as a difference as I was expecting. So I needed a much lighter touch.
Before watching these things, I had relative comfort and only a slight paranoia issue. Now thanks to LPL, I weld my door shut every time I leave the house!
Master lock is the bomb
Ain't nobody bustin that lock
Amazing. Lost a key to a job site but saw one of these on the railing. Made a tool by flattening a paperclip with a hammer and opened it right up.
I'm a part time burglar and every time I run into a lock I just see if theres a video on it. Just scored some gold, birth certificate and a pistol, thanks LPL!
Jack Kuehneman Nice you left your name. Lock picking patrolman is on the case to find you.
@@RevMarket they'll never catch me alive
I have such a lock in my garage holding some keys to the house. I always thought it was a very safe box, but now I learned differently :D