May you explain why you compare to 1 the current generated by the PEMFC, and why you took the maximun value? And why this max value (between the current and 1) goes to the function?
hello , how did we copy the formula in the function block section and where did those formulas come from ? i need it for the output voltage of 400 volts and i don't know how to put it in the fuel cell ? with a power of 1.6kw or 800 w
Sir, Do you please give the equation of above function. i searched in google but i cannot fine equation existly match with this function block equation.
Hi sir, how do you calculate the L, C and R value as well as the duty cycle? is it from the fuel cell output? Is the FC stack nominal 24 dc consider as the Vin/Vs and the FC output voltage consider for Vo for the parameter calculation? would appreciate your response sir.
Hello sir, why can't I boost this fuel cell until a voltage level that is bigger than what you used? Once i try to do that with a voltage loop and a PI controller, the duty cycle value gets bigger and bigger
May you explain why you compare to 1 the current generated by the PEMFC, and why you took the maximun value? And why this max value (between the current and 1) goes to the function?
The steps in simulations are explained very well and you have clearly explained the topic.
I will try with closed loop.
Thank you Sir.
You are welcome raghumala :)
hello , how did we copy the formula in the function block section and where did those formulas come from ?
i need it for the output voltage of 400 volts and i don't know how to put it in the fuel cell ?
with a power of 1.6kw or 800 w
what version of matlap simulink do u use in this video?
very good explanation
thanks for your efforts
Glad to hear it. Thank you :)
Sir, Do you please give the equation of above function. i searched in google but i cannot fine equation existly match with this function block equation.
Hi sir, how do you calculate the L, C and R value as well as the duty cycle? is it from the fuel cell output? Is the FC stack nominal 24 dc consider as the Vin/Vs and the FC output voltage consider for Vo for the parameter calculation? would appreciate your response sir.
Sir for 24V input ke liye kya karna hoga please bata dijiyea
Hello sir, why can't I boost this fuel cell until a voltage level that is bigger than what you used? Once i try to do that with a voltage loop and a PI controller, the duty cycle value gets bigger and bigger
Very Good explanation bro. If possible show some optimization model with PV array with programming explanation . Thank you.
how to increase the power rating
Thanks sir!
You are welcome :)
I hope you mean a high temperature stack, because low temperature pem operate at 65 or max 70 degrees Celsius, so the functions are WRONG