Cooler master ARGB controller A1. Control ARGB devices without 3 pin header via software.
Вставка
- Опубліковано 21 сер 2024
- product full name : led controller A1 addressable gen 2 RGB by cooler master..
connect argb devices on non argb header motherboard.
price = 1950 rs ( 24.51 $)
Cooler Master does not sponsor, authorize or endorse this video
pc specs:
processor : intel 11400f
graphics card : GTX 1060 oc (galax)
ram : 8 gb (xpg 3600hz )
cabinet : v 250 tg ( 3 fans intake, 1 out )
can use that even if your MB does not have rgb header
Yeah. Thats the point. Tho I´m not sure you can control it with software.
what header you connect to?
tell me is it still working properly??
How many effects are there in the software bro ?
there are 10 effects + 1 custom effect (in custom effect you can change color of each rgb on your argb fan or argb strip )
@@rushi435 thanks for replying & does it work with non cm argb fans like deepcool argb ?
@@hridaygauba7233 "YES" it works on any argb fans.... (i am using 3 thermaltake and 2 deepcool argb fans)
@@rushi435 oh great thanks a lot now I buy it.
@@rushi435 can you send the link of ur thermaltake fan>?
Bro how u connected fans to the controller? And whats that where u plugged the first wire
Oi, essa essa controladora envia os comandos da placa-mãe via usb sem necessidade de conector argb ou rgb ?
yes !
Will Armoury Crate (Aura Sync) detect it? I'm trying to have a USB, remote argb controller. I have an aura rog terminal but they're discontinued and I need another one.
can we connect cooler master ARGB fan (5v, 3 pin) to ASUS motherboard with 4 pin RGB header which is 12v with this controller?
don't do it.
hello? Can i use non-coolermaster argb fan on that controller?
yes you can use
Hi May I know if you use "1-to-3 splitter cable" for 3ARGB fan? and allow control individual lighting effect?
Splitter is needed only if your fan doesnot have daisy chaining. The good thing is that each channel of this controller can support upto 80 Leds. Since ARGB LEDS are separately addressable individual fan lighting effects are set entirely in software. So use a software solution like SignalRGB to get your individual separate fan effects and a lot more! Or use Cooler Masters MasterPlus+ software if you want just out of the box individual fan effects.
Trust me I have now Thermaltake SWAFAN 12 ARGB fans which uses a single cable for upto 3 fans with magnetic snap on connection system for daisy chaining. Reduces a lot of cable clutter. They are atleaset 50% more expensive compared to others but comes with extra reverse fan blades, significantly better build quality and great RGB color resolution.
Previously I was running LianLI ST120 pwm fans which had daisy chaning of individual cables (again no separate splitter need) and used them with an NZXT RGB & Fan Controller. I had created custom connectors for the ARGB to RGB section conversion because the controller supported only upto 60 LEDS per channel and the configuration was nightmare.
No physical button on controller?
there is no button on controller, we can control argb by software only.
Right, i didn't install the controller and saved myself some headache. Directly plugged into motherboard. MSI has mystic light software, that does a decent job.
i have the same controller but cannot find the one you use in 5:14 - 5:19 what is the LED MODE called?
3rd mode named as ( RELOAD)
Ótimo vídeo! Essa controladora funciona com coolers que são de outras marcas?
Si, funciona !
Nhai iske cooler master sickelflow fan argb work karega
yes
hi, i want to buy this product but in my locality store and amazone , their is not avalaible this product, plese tell from where you buy this ? i want to buy, plese give me the answer
mdcomputers.in/cooler-master-led-controller-a1.html?search=Cooler%20Master%20ARGB%20Controller
hello bro i have 7 fans of CM 4 pcs 140MM 3Pcs 120MM Halo but i cant change my colour how can i do ?
you can use custom mode for changing each fan/led colour
can it detect if using argb splitter to control each fan on that? tq
It does not detect. You can change each led colour but You can't change every fan effect. Thanks
Bro just tell ne how you connect it with ur motherboard cz I dont have a argb 3pin header.... So how u can use software.? And what does that usb b-port for?
basically this device for non argb 3pin header motherboards. you can control argb with master plus software. usb port is junction between motherboard and cooler master device. hope you got it.
@@rushi435 not actually just explain me, does that usb port goes in my motherboard I mean is that how the controller connects with motherboard??? Nd also tell that does my motherboard has that usb port??
@@chandanmaity8715 yes usb port goes in your motherboard usb header & all motherboards have multiple usb header port.
@@rushi435 okkkk got it brooo 🥶🥶🥶
whats the difference between argb1 and argb2?
Gen 2 devices refer to argb enabled hardware such as gpu, ram, keyboard....
where have you bought that?
vedant computers (online mode from india)
bro i have same cabinet