Super Helpful! i just ran to the pool store and installed in 5min which is a massive win for my non-technical self. :-) Thanks a million for the video!
I haven't worked for them since 2000 and didn't know they stopped selling replacement piston assemblies. And yes we always had a huge test tank right next to the assembly line and each module would run through a full cycle.
Great video! My system only has 5 zones so one of the 6 pipes is intentionally blocked. Would you know if there are any special considerations for installation (orientation, settings)? Thanks in advance.
Hi there, to answer simply no there isn't anything specific you need to do other than remove the old one and replace with the new. May need to rotate it so it will fall into place and line up but that is pretty much it. Hope this helps!
Great video!!! Shame that the last 2 I purchased lasted only 2 years each... The previous one seems to have lasted at least 8 years not sure what is different.
Thank you for the comment! We appreciate it! We're sorry to hear about your Paramount 6 Port Gear Module only lasting 2 years instead of your previous one that lasted 8. Not quite sure what is different, only thing we can tell you is that the 6 Port Gear Module is a high quality product manufactured by Paramount, it is a product that we can vouch for. But we hope you have better luck on your next purchase. If you have any questions pertaining to the manufacturing or wanting to know what might be different we highly recommend calling Paramount directly: 1-800-621-5886
Hi There, These items can continuously work for a number of year when running consistently. However, a lot of factors play into the life of the module such as water chemistry, sun exposure, pressure, etc. You do receive a full one year warranty from Paramount when purchased as well!
Hi there, There are a lot of different factors that can contribute to the wear of these modules like use and or water chemistry as an example, therefore they only have a life expectancy of 2 to 3 years. To answer your follow-up question simply, no. You cannot use a 6 port in place of a 4 port gear module, does not work like that. I hope I was able to answer your questions with a bit of clarity. Have a great week!
Same here buddy, I am replacing these every 2 years and there is nothing anybody can do about them but spend another $200 and hope it will work for an other 24 months...
My issue was that one of my zones would not close (3 heads stayed up). I decided to replace the valve, but for some reason i'm still having the same issue except this time it's a different zone. I did verify that the switch was on run and even moved it a few times, and the other zones still work just with less pressure.
What is the Minimal operating PSI for this valve? Does it need to be at 20 psi and higher to function correctly? That is the number I found in the installation manual. Just wondering what you have seen in the real world. Also if it is not at the normal PSI and everything is clean then what have you seen as a cause of low psi at the valve?
Hi there, The optimal range for your Paramount 6-Port Valve is between roughly 18-22 PSI. It does not need to be higher than 20PSI to function properly as you do not need that much pressure to operate your heads. You will see a fluctuation on PSI for each zone of heads as they vary in size and strength. If you are still having a low pressure at the valve it is most likely due to air in the system or a valve shut causing water to flow elsewhere in your system. If you are having any other issues I would suggest contacting your local pool company for more information.
Hello Lily! Every pools plumbing is different. We suggest giving the office a call for a little further of a breakdown, or reaching out to a pool professional in your area for a little more in-depth advise. We appreciate you watching and we are glad it helped! ePoolSupply
When I try to lift mine out it seems stuck on one side and doesn't come straight out. I'm not sure if I should try a little more force or if there is some other magic to use
Hello, you will need to take the module out of your system and see which one you have. It’s all dependent on what your pool builder installed. If there are no stickers on the valve identifying it, then you can watch our video on how to identify your paramount module.
what happens when the pool pump is on but its not showing pressure on the gauge? I took the lid off and turned the motor on and water shoots out of the center pipe and replaced the gauge but still doesn't show pressure
WHen my system comes on in the morning for the first 30 -45 mins I get air coming out of some of the pool heads. Is this normal? If it is a closed system why is there air in the line? I do have a solar heater, is that why i am getting air in the line?
These things can last anywhere from 4 years to 6 months. There are a lot of factors here including pressure and water chemistry that can alter the life of the valve. However, these have a 1 year manufacturing warranty. So call Paramount if it stopped working!
I replaced my module twice! It keeps getting stuck on one zone. Each zone is 12 on the pressure gauge, its stays on that zone for about a min and moves to the next... The zone it gets stuck on the pressure is 22. Much higher for some reason. It gets stuck here. Any clue why I get so much pressure on only one zone? or why its keeps getting stuck? I returned the last module for a new one thinking it was the module.. I put the new module in and it did the same exact thing. Anyone have any advice on this issue?
Sounds like there might be a blockage in that line. You can try to clear it by taking the pop-ups out and running the pump at full speed for a couple of hours to see if that will clear the line. Hope this helps.
One of our pistons failed so I bought a replacement unit. when we installed the replacement all the heads are still up and the device is making a very loud rattling sound. Did we receive a faulty unit?
You probably ordered the wrong manufacturer band clamp. It should be this one: www.epoolsupply.com/products/paramount-in-floor-cleaning-system-band-clamp-stainless-steel
Super Helpful! i just ran to the pool store and installed in 5min which is a massive win for my non-technical self. :-) Thanks a million for the video!
Glad it helped!
I haven't worked for them since 2000 and didn't know they stopped selling replacement piston assemblies. And yes we always had a huge test tank right next to the assembly line and each module would run through a full cycle.
Appreciate the feedback! : )
Should I set the pool return to just the pop ups, or split 50/50 between the pop ups and the return jets on the sides of the pool?
To get the best cleaning performance from your pop-ups you would want 100% of the water returned to them. Hope this helps!
@@ePoolSupply sweet, thank you for the fast reply!
what have you found to be the life expectancy of the 6 port module?
Hello, Normally about 2 to 3 years.
Great video! My system only has 5 zones so one of the 6 pipes is intentionally blocked. Would you know if there are any special considerations for installation (orientation, settings)? Thanks in advance.
Hi there, to answer simply no there isn't anything specific you need to do other than remove the old one and replace with the new. May need to rotate it so it will fall into place and line up but that is pretty much it. Hope this helps!
Great video!!! Shame that the last 2 I purchased lasted only 2 years each... The previous one seems to have lasted at least 8 years not sure what is different.
Thank you for the comment! We appreciate it! We're sorry to hear about your Paramount 6 Port Gear Module only lasting 2 years instead of your previous one that lasted 8. Not quite sure what is different, only thing we can tell you is that the 6 Port Gear Module is a high quality product manufactured by Paramount, it is a product that we can vouch for. But we hope you have better luck on your next purchase. If you have any questions pertaining to the manufacturing or wanting to know what might be different we highly recommend calling Paramount directly: 1-800-621-5886
Very helpful info. Thanks for posting!
Glad it was helpful!
Great video; thanks. About how long should these valves last if running continuously?
Hi There, These items can continuously work for a number of year when running consistently. However, a lot of factors play into the life of the module such as water chemistry, sun exposure, pressure, etc. You do receive a full one year warranty from Paramount when purchased as well!
what causes the modules to fail. I seem to have to replace these, once a year. Also, can I use a 6 port in place of a 4 port?
Hi there, There are a lot of different factors that can contribute to the wear of these modules like use and or water chemistry as an example, therefore they only have a life expectancy of 2 to 3 years. To answer your follow-up question simply, no. You cannot use a 6 port in place of a 4 port gear module, does not work like that. I hope I was able to answer your questions with a bit of clarity. Have a great week!
Same here buddy, I am replacing these every 2 years and there is nothing anybody can do about them but spend another $200 and hope it will work for an other 24 months...
My pressure guage keeps staying at 0. Do I need to replace the whole module?
It is either a bad module or the pressure gauge is bad.
Is there a generic version of this valve? Heard you mention something but I won't mention any names...(caretaker).
there is no generic version of the 6 port. It is a one of kind product
My issue was that one of my zones would not close (3 heads stayed up). I decided to replace the valve, but for some reason i'm still having the same issue except this time it's a different zone. I did verify that the switch was on run and even moved it a few times, and the other zones still work just with less pressure.
Sounds like the gear module is bad. Replacing the valve but using the same gear module will not fix that issue. At least that's what it sounds like.
Thank you!
You're welcome!
Great video, thanks
No problem 👍
What is the Minimal operating PSI for this valve? Does it need to be at 20 psi and higher to function correctly? That is the number I found in the installation manual. Just wondering what you have seen in the real world. Also if it is not at the normal PSI and everything is clean then what have you seen as a cause of low psi at the valve?
Hi there, The optimal range for your Paramount 6-Port Valve is between roughly 18-22 PSI. It does not need to be higher than 20PSI to function properly as you do not need that much pressure to operate your heads. You will see a fluctuation on PSI for each zone of heads as they vary in size and strength. If you are still having a low pressure at the valve it is most likely due to air in the system or a valve shut causing water to flow elsewhere in your system.
If you are having any other issues I would suggest contacting your local pool company for more information.
Would this be the same for the pool and separate spa combo? Not sure how many types there are… btw this is super helpful
Hello Lily!
Every pools plumbing is different. We suggest giving the office a call for a little further of a breakdown, or reaching out to a pool professional in your area for a little more in-depth advise. We appreciate you watching and we are glad it helped!
ePoolSupply
When I try to lift mine out it seems stuck on one side and doesn't come straight out. I'm not sure if I should try a little more force or if there is some other magic to use
Hi there, in this case a little bit more force would be required as I imagine that it has been in the valve for a long time. Hope this helps!
My valve module assembly is stuck and won’t come out when I pull it up. What should I do?!?!!!!
You need to use more force and try to get some leverage with a screwdriver or something that will fit in between.
What is the warranty period on this part?
Great question! Most of Paramount's products come with a 1 year warranty which would include the 6 Port Gear Module. Hope this helps!
Thank you!!!
You're welcome!
how do I know when to replace
Hi there, it will need to be replaced when it is no longer functioning properly. Hope this helps!
I have four PCC2000 pop ups in bottom of pool what is the correct replacement for this paramount gear module for 4 pop ups?
Hello, you will need to take the module out of your system and see which one you have. It’s all dependent on what your pool builder installed. If there are no stickers on the valve identifying it, then you can watch our video on how to identify your paramount module.
ePoolSupply I ordered a 6 valve based on what I saw on your utube video I believe I’m correct, thanks
I was correct got the right 6 port gear works great! Thanks
what happens when the pool pump is on but its not showing pressure on the gauge? I took the lid off and turned the motor on and water shoots out of the center pipe and replaced the gauge but still doesn't show pressure
Is 100 percent of the water travelling to the water valve?
I have this same question which was not answered. So, are they saying the gauge normally doesn't show pressure? PS other than this, its works fine????
WHen my system comes on in the morning for the first 30 -45 mins I get air coming out of some of the pool heads. Is this normal? If it is a closed system why is there air in the line? I do have a solar heater, is that why i am getting air in the line?
You either have a leak somewhere is the system or you may have a UV or Ozone system that pushes oxygen out the heads. Hope this helps!
How long are these things supposed to last? This is my 4th season and I think it's already dead (6 heads coming up at same time)
These things can last anywhere from 4 years to 6 months. There are a lot of factors here including pressure and water chemistry that can alter the life of the valve. However, these have a 1 year manufacturing warranty. So call Paramount if it stopped working!
Same here. Mines was good for 4 years, and now I’m assed out
Mine lasted 2 years, not worth the price.
I replaced my module twice! It keeps getting stuck on one zone. Each zone is 12 on the pressure gauge, its stays on that zone for about a min and moves to the next... The zone it gets stuck on the pressure is 22. Much higher for some reason. It gets stuck here. Any clue why I get so much pressure on only one zone? or why its keeps getting stuck? I returned the last module for a new one thinking it was the module.. I put the new module in and it did the same exact thing. Anyone have any advice on this issue?
Sounds like there might be a blockage in that line. You can try to clear it by taking the pop-ups out and running the pump at full speed for a couple of hours to see if that will clear the line. Hope this helps.
One of our pistons failed so I bought a replacement unit. when we installed the replacement all the heads are still up and the device is making a very loud rattling sound. Did we receive a faulty unit?
It is possible but it would be hard to say for sure without physically being there.
@@ePoolSupply they sent the wrong part. All of the pistons were open on the top vs closed making it a full 6 piston valve.
have a band that seems to be too large
You probably ordered the wrong manufacturer band clamp. It should be this one: www.epoolsupply.com/products/paramount-in-floor-cleaning-system-band-clamp-stainless-steel
Sticker may last 20 years but the mechanism only lasts 5 years
Thank you. We appreciate the input.
I have this system with 2 diverter valves, installed in 2001. I am - 21 years later - finally replacing ONE of the two gear mechanisms.
Expensive as hell little piece of plastic.
That about sums it up. Appreciate the feedback.