4:03 This may or may not be right, but this is my theory. Backstab connections are meant to be one and done. This means that, you can only use them once. You can use a small screwdriver or something similar to stick in a release hole to depress the stab in terminal and release the wire, but since it's not springy, chances are, it'll permanently deform. If it does, the connection will be very loose (Not like backstabbing is already a loose connection to begin with). Thus, these are not supposed to be reused. So maybe they used that one once, then removed it, realized the wire was just falling out, and then used the screw terminal. But you should always use the screw terminals, or even better, ones that have a clamp that clamps the wire between the terminal and a metal plate and secures by tightening the terminal screw.
Thanks for this dude. I was so weirded out by a lack of screws on one side of the outlet. I always thought both black leads were hot, and didn't realize they simply complete a circuit.
I have been looking for information as to whether itbisnpossibke to install a usb outlet as a split switch (top plug controlled by wall switch and lower plug always hot). The new USB outlet I have has push in connectors only and I don't know if there is a way to break the connection between the hot side wire plug connectors. Your vids are very clear and informative, so I was hoping that you might know. Thanks!
I mean, when I heard the part of "Don't lick the wires" I was, like, is that some kind of slang I don't know, is it a technicallity used in the US? hahaha
Very well explained and visually great. In particular it was great to see the explanation with two whites and two blacks so that it was clear what to do. Have installed many many outlets, first time with the USB and was surprised that there were only 2 screws not 4. Your video clarified all of that. Two minor points: my Levithon does not clearly say USB C on the box but I assume that the USB C connector is what goes into the phone tablet etc. Secondly you mention that the Hot labeling on the back also has the word line... Since both wires go on the same brass screw I assume that it does not matter which black wire goes on the left or right side.... To be safe I will put the live power on the left side where I see the word line. Thank you very much.
This is an excellent step-by-step instructional video but just as i was feeling confident to go through with this, I encounter TWO copper (ground) wires wrapped around the green screw. First time I come across this. 🙀 Is it okay to just wrap both around the new USB outlet? 🫣. Thank you so much!
What about one that is also connected to a switch on the wall. I have 2 white, 2 black, 1 ground and 1 red wire
One black is hot and is an individual circuit. And the red is hot and an individual circuit. Potentially
4:03
This may or may not be right, but this is my theory. Backstab connections are meant to be one and done. This means that, you can only use them once. You can use a small screwdriver or something similar to stick in a release hole to depress the stab in terminal and release the wire, but since it's not springy, chances are, it'll permanently deform. If it does, the connection will be very loose (Not like backstabbing is already a loose connection to begin with). Thus, these are not supposed to be reused. So maybe they used that one once, then removed it, realized the wire was just falling out, and then used the screw terminal. But you should always use the screw terminals, or even better, ones that have a clamp that clamps the wire between the terminal and a metal plate and secures by tightening the terminal screw.
SO thorough and helpful! Thank you!
Thanks for this dude. I was so weirded out by a lack of screws on one side of the outlet. I always thought both black leads were hot, and didn't realize they simply complete a circuit.
Thanks so much for watching. Glad I could help clear that up.
USB A through.
I have been looking for information as to whether itbisnpossibke to install a usb outlet as a split switch (top plug controlled by wall switch and lower plug always hot). The new USB outlet I have has push in connectors only and I don't know if there is a way to break the connection between the hot side wire plug connectors. Your vids are very clear and informative, so I was hoping that you might know. Thanks!
Damn, why is my electrical always part of the "very rare occasion". Thanks for the tip! I might had caused a problem.
I mean, when I heard the part of "Don't lick the wires" I was, like, is that some kind of slang I don't know, is it a technicallity used in the US?
hahaha
Very well explained and visually great. In particular it was great to see the explanation with two whites and two blacks so that it was clear what to do. Have installed many many outlets, first time with the USB and was surprised that there were only 2 screws not 4. Your video clarified all of that. Two minor points: my Levithon does not clearly say USB C on the box but I assume that the USB C connector is what goes into the phone tablet etc. Secondly you mention that the Hot labeling on the back also has the word line... Since both wires go on the same brass screw I assume that it does not matter which black wire goes on the left or right side.... To be safe I will put the live power on the left side where I see the word line. Thank you very much.
Oh, can you share the video abput what to do if your jumper is broken?
seriously good stuff - made a bee line to ACE and got going. Kids happy !
Thanks, I just bought a new electric razor and it Only has a USB cord. I believe I will look at replacing a few outlets in my condo now! Cheers!
Thanks for the comment, Robert. Definitely an upgrade to have USB outlets. Let us know how it goes.
Very good job!
Thank you, Sergii
This video is very helpful! I got my questions answered! Thanks
Thanks for watching, Daniel. I appreciate the comment.
This is an excellent step-by-step instructional video but just as i was feeling confident to go through with this, I encounter TWO copper (ground) wires wrapped around the green screw. First time I come across this. 🙀 Is it okay to just wrap both around the new USB outlet? 🫣. Thank you so much!