REBUILDING THIS CRASHED TRIUMPH WAS A MISTAKE!
Вставка
- Опубліковано 12 жов 2024
- In this video, watch as I take on the challenge of rebuilding a crashed motorcycle from scratch! From assessing the damage to sourcing parts and meticulously putting everything back together, follow along with every step of the process. Whether you're a seasoned mechanic or just a motorcycle enthusiast, you'll find plenty of tips, tricks, and insights. Don't forget to like, comment, and subscribe for more motorcycle restoration content!
#MotorcycleRebuild #bikerestoration #motorcyclerepair #diymechanic #MotorcycleProject #CrashedBike #bikelife #twowheels #motorcyclemaintenance #garagelife #twowheeler
ua-cam.com/video/qEYaSDdYN8U/v-deo.htmlsi=2cjTdhKYLgAnWCNr
“That’s a lie, find those tank bolts” 😂😂 I’ve never worked on a Triumph cool to see how it goes back together, sounds good too!
@@tta850 it wouldn’t be fun if you didn’t lose a couple of bolts 🤦🏻♂️😂😂
Hi,did you connect the hoses to the airbox 🤔 didn't see you fit them cheers
Steve.
@@Steve-bp9rj well spotted I forget and connected off camera 😂
great series. where did you get the parts cabinet you are using.
@@zzzpip it’s just a hair salon/barbers trolley they are very cheap and versatile 👍
Tip for you, I tend to find my local main dealer is actually cheaper than most other outlets for OE
@@steveneastland4128 the speedo head bracket was actually very reasonable and the cheapest I could find from World of Triumph. But I will bear that in mind. 👍
Nice bike by the way @@Patchesrepairshop I’ve an ‘06 that is fantastic but was extensively damaged when I got t-boned
@steveneastland4128 ouch a T-boned bike 😳
Is it true that Triumph starter sprag clutches are still a problem like I had with my '95 900 Sprint? 3 years ago it cost me AUD$2250 (1200 quid) to get replaced, plus 2 returns to local Triumph dealer to fix their stuff ups and a further $650 from another mechanic to get it running properly, (it was running like a v. sick 600), because dealer wouldn't listen to me or even take it for a ride to realise what I was complaining about, (cam timing and carb tuning were WAY out but weren't before I took it to them). It's now got a blown head gasket, (heaps of steam from r.h. exhaust).
@@bryanfarrow914 I’m unsure I hope not, I’ll do some homework on that one. 👍
That rad looks a bit past it young fella, fins look a little scabby, ! New clamps would have been good,
@@raymorris952 I agree, watch this space 👍
Good video, the bike will look great when done.
Thanks, the rollover sensor through me a bit 👍