Came to this video via trying a fix for my 407 coupe ASB and airbag sensors. Don't even own a 406 anymore but absolutely mesmerised by the almost full teardown of the cabin. Outstanding skills and knowledge.
What a mess. Very few would be those who would venture to do this service. Nowadays, few people know and want to work. Good work.👏👏I have a 308 with a noise, like a creak, a groan, as I turn the steering wheel after it's hot on the side of the hydraulic pump. It only happens when it's hot and after being in the sun. I suspect the shock absorver support. But nobody wants to move. They say to let it go until it makes more noise. Either they don't know and are in doubt or they don't want to work.😞
The noise in your 308 Can you jack front both front wheels up and see if the strut tops are turning freely or if the spring is binding in any way, listen for any odd noises. The fact it happens only when hot is odd, the hydraulic fluid reservoir for the steering may need to be checked.
you love the 406 buddy lol bit like myself have a 406 hdi 2003 SE model half leather parked in the shed this past ten years... bringing her back to life this summer ive put alot of new engine parts and all on her the car is deadly aint they all 😁
Every time i get back into one it feels like home haha. Still have my old 2.0 HDi exective which i would love to tidy up some time in the future. Actually did a swap recenlty the 407 in exchange for a phase 1 2.1 TD lovely old wagon so comfortable. SE was a really nice run out spec for the 406, some nice bits of trim from the chromed door handles to the shiny mirror surrounds. how many miles are on it?
Currently in the process of stripping my 406 before it goes in for welding up, stuck on what size torx bit I need for removing the panel holding the carpet down at 07:12. Any idea what size it is? TIA!
Good day, I cleaned the throttle body of my peugeot 307 petrol vehicle before, but there was a problem, the idling in lpg rises by itself, 1500 rpm comes on its own, it happens when it is idle, it does not happen with gasoline, it gradually decreases when the throttle is pressed, is it necessary to adapt to the throttle body? Thank you for the information you provide.
Hi there, I am not 100% sure when it comes to LPG related issues you have another fuel injection system generally piggybacking from signals used by the petrol injection system. You may need to take it to whoever services the LPG system near you or do some more research into the company that supplied it, see if they have service guides or manuals to follow. My dad and uncle drove LPG cars up until 10 years ago but i did not work on them much.
I am not completely sure as i have not worked a great deal on coupes. I think they are mostly the same, certainly this parts diagram is no different when i select saloon or coupe catalogs.ssg.asia/peugeot/?lang=en&fbclid=IwAR0_lP0MLePfEgd5X0V7Q78jm_9e9WehaUjVHCPRXgmfj1jIhwehoj9aZQk#c3Q9PTgwfHxzdHM9PXsiMTAiOiJNb2RlbCIsIjIwIjoiNDA2IChyZXN0eWxpbmcpIiwiNDAiOiJCb2R5OiBDT1VQRSAyIERPT1JTIFwvIEVuZ2luZTogMy4waSBWNiAyNHYgMjEwIChFUzlKNFMpIiwiNTAiOiJlbGVjdHJpY2FsIGNvbXBvbmVudHMiLCI3MCI6ImFpcmJhZ3MiLCI4MCI6IkNPTlRST0wgVU5JVCBBTkQgU0VOU09SIn18fGNvZGU9PTFQRDl8fGJvZHk9PUIwREQyfHxlbmdpbmU9PUIwRjNMfHxjYXRfaWQ9PUZDVDAzMDB8fHN1YkdycF9pZD09RkNUMDk1M3x8cmVmZG9jcz09RDlMODgyRzgwQXx8cmVmZG9jPT1EOUw4ODJHODBBfHxzdWJHcnBOYW1lPT1DT05UUk9MIFVOSVQgQU5EIFNFTlNPUnx8c3VwcGxpZXI9PQ%3D%3D
I dont honestly know, did it more so as a favour for a mate, itemised this at £100 to cover the time and cleaning products which wouldn’t really cover my time. The cars total repairs to get it back on the road including my time for other work and a full set of new tyres is sitting at £1400 that includes a full service, cambelt, new disks/pads all round, exhaust flexi repair turbo was also removed to free it up the actuator was sticky from it sitting.
I had a Facebook page for this channel but for whatever unknown reason Facebook have it in review I plan to setup an email address In the meantime comments is the only means of communication i can offer.
@@peugeotCitroen2CV I see. So if you have a time please check these two vids of my 206. It only makes the noise when the engine is warm at idle. ua-cam.com/video/mmozRNadNxU/v-deo.html ua-cam.com/video/xjIPoX2neXo/v-deo.html What do you think about this noise? thank you!
@@vikt1986 From the video it almost sounds like the bottom end of the engine has a knock in it, although in general the TU engines are quite resilient, is there any issues with the head gasket oil getting into the coolant or vise versa? On the plus side they are quite a cheap engine to get and fairly easy to swap
The water was leaking in due to two factors: - blocked sunroof drains - damaged evaporation barrier on the rear left door was letting in water Those two factors combined with it sitting idle outside for over 5 years led to the water getting in and sitting
@@СерегаВладимирович-з5ю I dealt with those issues off camera mainly because i have separate videos covering the sunroof drains and the rear door card/evaporation barrier if you are interested. This car is now back on the road and has remained dry inside.
Hi Richard, for some reason the facebook page is down at the moment, trying to get it back up and running. Seen your messages but cant respond to them at the moment.
Been watching this channel for years, always pulls me out of a hole!
Thanks for the comment, great to see it has been helpful.
Came to this video via trying a fix for my 407 coupe ASB and airbag sensors. Don't even own a 406 anymore but absolutely mesmerised by the almost full teardown of the cabin. Outstanding skills and knowledge.
К сожалению столкнулся с той же проблемой, спасибо за полную инструкцию по разбору салона. Сам дальше заднего ковра ещё не снимал) Чёт боюсь)))
Thanks for the comment, hope you manage to get the back carpet out, if anything its easier to remove than the front one.
Thank You! I am restoring an 810K kilometers 406 and I was looking for interior removing. Thank You!
A very commendable mileage, all the best with the interior work and many more km in your 406
@@peugeotCitroen2CV Merci! Maybe I record to YT too
Monumental job on that front carpet m8. Great informative video as usual 👍
This timelapse is quite relaxing to watch :o
ASMR for 406 lunatics. And hey! Thank you for saving another 406 :)
Thanks, thought there would be some people out there who might appreciate it, didnt see any point in trying to edit it all into one video though.
What a mess. Very few would be those who would venture to do this service. Nowadays, few people know and want to work. Good work.👏👏I have a 308 with a noise, like a creak, a groan, as I turn the steering wheel after it's hot on the side of the hydraulic pump. It only happens when it's hot and after being in the sun. I suspect the shock absorver support. But nobody wants to move. They say to let it go until it makes more noise. Either they don't know and are in doubt or they don't want to work.😞
The noise in your 308
Can you jack front both front wheels up and see if the strut tops are turning freely or if the spring is binding in any way, listen for any odd noises.
The fact it happens only when hot is odd, the hydraulic fluid reservoir for the steering may need to be checked.
Glad to found your channel.
Thanks really for this it did help me so much and i found the issue with my car 11:14 really appreciate
can send link website to buy the programme scanning the car
you love the 406 buddy lol bit like myself have a 406 hdi 2003 SE model half leather parked in the shed this past ten years... bringing her back to life this summer ive put alot of new engine parts and all on her the car is deadly aint they all 😁
Every time i get back into one it feels like home haha. Still have my old 2.0 HDi exective which i would love to tidy up some time in the future. Actually did a swap recenlty the 407 in exchange for a phase 1 2.1 TD lovely old wagon so comfortable.
SE was a really nice run out spec for the 406, some nice bits of trim from the chromed door handles to the shiny mirror surrounds. how many miles are on it?
GREAT VIDEO !!!!
Thanks for the comment
Currently in the process of stripping my 406 before it goes in for welding up, stuck on what size torx bit I need for removing the panel holding the carpet down at 07:12. Any idea what size it is? TIA!
Hi there, sorry i cant remember.
A wee set is always best, not much more expensive
www.amazon.co.uk/Amtech-I8200-Torque-8-Inch-10-Piece/dp/B002RWQB4S
@@peugeotCitroen2CV No problem, thank you!
It happened to me b"coz of rear cluster seal. Wet under back seat while replacing my fuel pump
Quite a common one now on most 406s, what did you use to seal up your light cluster?
Good day, I cleaned the throttle body of my peugeot 307 petrol vehicle before, but there was a problem, the idling in lpg rises by itself, 1500 rpm comes on its own, it happens when it is idle, it does not happen with gasoline, it gradually decreases when the throttle is pressed, is it necessary to adapt to the throttle body? Thank you for the information you provide.
Hi there,
I am not 100% sure when it comes to LPG related issues you have another fuel injection system generally piggybacking from signals used by the petrol injection system. You may need to take it to whoever services the LPG system near you or do some more research into the company that supplied it, see if they have service guides or manuals to follow. My dad and uncle drove LPG cars up until 10 years ago but i did not work on them much.
Can i ask you if a peugeot 406 coupe also have a airbag crash sensor like yours on the side. The little black sealed thing.
I am not completely sure as i have not worked a great deal on coupes. I think they are mostly the same, certainly this parts diagram is no different when i select saloon or coupe
catalogs.ssg.asia/peugeot/?lang=en&fbclid=IwAR0_lP0MLePfEgd5X0V7Q78jm_9e9WehaUjVHCPRXgmfj1jIhwehoj9aZQk#c3Q9PTgwfHxzdHM9PXsiMTAiOiJNb2RlbCIsIjIwIjoiNDA2IChyZXN0eWxpbmcpIiwiNDAiOiJCb2R5OiBDT1VQRSAyIERPT1JTIFwvIEVuZ2luZTogMy4waSBWNiAyNHYgMjEwIChFUzlKNFMpIiwiNTAiOiJlbGVjdHJpY2FsIGNvbXBvbmVudHMiLCI3MCI6ImFpcmJhZ3MiLCI4MCI6IkNPTlRST0wgVU5JVCBBTkQgU0VOU09SIn18fGNvZGU9PTFQRDl8fGJvZHk9PUIwREQyfHxlbmdpbmU9PUIwRjNMfHxjYXRfaWQ9PUZDVDAzMDB8fHN1YkdycF9pZD09RkNUMDk1M3x8cmVmZG9jcz09RDlMODgyRzgwQXx8cmVmZG9jPT1EOUw4ODJHODBBfHxzdWJHcnBOYW1lPT1DT05UUk9MIFVOSVQgQU5EIFNFTlNPUnx8c3VwcGxpZXI9PQ%3D%3D
Hello!
How much for this work?
I dont honestly know, did it more so as a favour for a mate, itemised this at £100 to cover the time and cleaning products which wouldn’t really cover my time.
The cars total repairs to get it back on the road including my time for other work and a full set of new tyres is sitting at £1400 that includes a full service, cambelt, new disks/pads all round, exhaust flexi repair turbo was also removed to free it up the actuator was sticky from it sitting.
@@peugeotCitroen2CV GOOD price. Only fix turbo coast 300£
@peugeotCitroen2CV - How can I reach you?I have a question.
I had a Facebook page for this channel but for whatever unknown reason Facebook have it in review
I plan to setup an email address
In the meantime comments is the only means of communication i can offer.
@@peugeotCitroen2CV I see. So if you have a time please check these two vids of my 206. It only makes the noise when the engine is warm at idle.
ua-cam.com/video/mmozRNadNxU/v-deo.html
ua-cam.com/video/xjIPoX2neXo/v-deo.html
What do you think about this noise?
thank you!
@@vikt1986 From the video it almost sounds like the bottom end of the engine has a knock in it, although in general the TU engines are quite resilient, is there any issues with the head gasket oil getting into the coolant or vise versa? On the plus side they are quite a cheap engine to get and fairly easy to swap
Так в чем причина воды в салоне!?
The water was leaking in due to two factors:
- blocked sunroof drains
- damaged evaporation barrier on the rear left door was letting in water
Those two factors combined with it sitting idle outside for over 5 years led to the water getting in and sitting
Если причина не устранена..все равно вода появится!
@@СерегаВладимирович-з5ю
I dealt with those issues off camera mainly because i have separate videos covering the sunroof drains and the rear door card/evaporation barrier if you are interested.
This car is now back on the road and has remained dry inside.
Hy friends! ☺️I have Peugeot 406 and Some Time talk Messenger, i dont find message list ☹️ Your page delete facebook ?
Hi Richard, for some reason the facebook page is down at the moment, trying to get it back up and running. Seen your messages but cant respond to them at the moment.
where is your garage . i presume you repair cars for a living
Hi there, i am based in northern ireland. Although no this is not what i do for a living, i am a design engineer.