How to remove & install the front wheel on a GL1500
Вставка
- Опубліковано 21 жов 2024
- Today i'm showing you how to remove & install the front wheel on a GL1500 Goldwing. The process should be the same on GL1500 models 1988-2000.
Did you enjoy the video? Would you like to see more content? Well then consider making a $2-$5.00 monthly pledge or donating a $1 to the channel ...every little bit helps, the channel to grow, Thank you for your support.
CLICK HERE:
www.paypal.com...
#Goldwing
#GL1500
#Honda
I created this video with the UA-cam Video Editor ( / editor )
This is my third Wing, but my local dealer will not work on anything more than 20 years old, so I am determined to do all the maintenance myself. The Wing needs two new tires and thanks to you, I was able to do the front without cussing once. We’ll have to see how the rear goes.
EXCELLENT....TY FOR TAKING THE TIME TO SHARE YOUR WISDOM.
My go to Everytime I change tires. Thank you so much for taking the time. 😎
Really use your videos in working on my 95 goldwing, Thankyou.
Thanks for the Video, very helpful. I have a couple of changes to the procedure. Just need to loosen the bolts on the "Ring of Fire" , no need to completely remove them. To remove the 22mm bolt I needed to hold the axle on the left side with a small rod. I used a screwdriver and let it rest against the fork. Also I only removed the caliper on the left side. Left the right side attached. No need to loosen the right brake caliper. Thanks again for the video
Good day, Clifford
You promise to return to UA-cam, we miss you!
Johnny Boy
Thank you Johnny Boy! I do intend do return to UA-cam. Life has taking an ugly turn as it has for most people. I'm digging myself out of this hole, and I'm in the process of moving to a new place with a nice shop were I can do my videos. My last garage was destroyed by a tree and the house was partially flooded. I'm currently working on buying better equipment to make the video quality alot better instead of using my cell phone lol. Again thank you for yours words of encouragement, I need them. Hopefully I plan to return soon, with some new projects and old ones returning.
@@CliffordRice Your still alive?????!!!!!!! I haven't seen anything from you in a few years. Wow. So happy your alive. 😁
@@JohnSmith-uy7svi'm very much alive lol. I do intend to return to UA-cam. I think I might to a update video here this year or early next year. I'm moving to a new location with a shop which will allow me to do alot more filming day and night.
@@CliffordRice I'm pretty sure I left a comment a few years ago and said something like, "yep he's dead. Nothing in a year or two." I even google your name in the obits trying to find you, but, alas.. your not dead........yet. I just changed my front and rear tires again for the second time in 2 years and 10,000 miles. Only difference this time is that I saw someone some place unbolting the back compartments with the top bolts loose and swinging the entire trunks up and resting on where the seat would be after you removed that. Wow, what a difference and so much room to get to everything. Guess you can call it a "transformer." Wish I could send you the pictures of it. So funny looking. take care. Glad you alive. 😁😍
Clifford, your the man! Thank you for this video and others. I have learned so much!!
Thanks a lot Today this guide Help me to get a successful change of tire
Nice video, I have found on my gl1500 if I spray the plastic tabs on the plastic parts, with silicone spray
they go back together a lot easier.
Thank you for the videos!! AND EVERYTHING! LOL
Cliff do you know of a good video explaining replacing fork seals for this Gl1500? Thanks
cliff how do you install the gearbox retainer when you change the front wheel bearings? i cant figure out how the speedometer works. thaks
Looks like I'm probably buying one this weekend. Seller says it needs a front tire. might trailer it til I get it into the shop and do the same thing.
I appreciate all the videos. Thanks
Your welcome
It's official the person claiming to be Clifford Rice is actually ELVIS PRESLEY,,,YES,EVERYONE WATCHING YOUR LISTENING TO "THE Mr Elvis Presley!! An everything! Support him
5:11 i would have tested the valve stem on camera, just to be through..good job on video...get a camera stand to enhance production!!
edit again.....tie / strap chain....the rear tire to the kickstand to the jack it wont go anywhere....
good job txs for the idea im going to try something!!!
Thanks for this video! My dash lights don’t work except for the high gear light. Hard fix? 1996 Goldwing interstate.
Thanks,
Andy
Can you show how to bleed the brakes on the bike in every step of the way thanks
Good afternoon, do you have information on the repair of the transmission (gearbox)?
Thanks for your videos
Clif, have yo ever done fork seals on a GL1500? This winter mine have stared peeing all over the floor? Thanks for the channel!
Thanks, Clifford, What size is your front tire??
Don`t forget to pump the front brake until it`s hard before you test it
How do I put fork bearings in a 2000 gold wing?
You can remove the front tire with out removing the calliper. Just don't touch the brake levers. It slides right in between the pads
John Luciano not sure, guess you could. I find it better to take it off and have it out of the way.
Thanks 😉👍🏻🇩🇰
Gotta hand it to Clifford excellent videos,greatly appreciated!!
Good video.My 2000 1500 won't pump up the air ride suspension,any idea on how I my find the problem
Byron Stubbert have you check the fuses?
Clifford Rice The fuses are all good
Byron Stubbert does it even try to do anything (like make noise?)
It was making click type of noise
Might be a bad air pump. I'll double check that when I get home.
Which side is the passenger side? He said to put the “R” on the passenger side. Great video and makes it look easy.
"R" is for right side, I work on cars a lot more, and i get mixed every now and then. Calling the right side the passenger side
Do you have a link for rear tire?
You had me at , " one little tit".
I just got a 99 gl1500 goldwing se with a driver's back rest but unfortunately no mounting bolts does anyone know what they are size wise?
mounting bolts for what ,they slide into the bracket on the sides of the seat with a compresson fitting
Outstanding
Dealer wants $200 in labour to change the front tire. So I’m gonna attempt to take off the wheel myself and save some that way.. see what happens lol
Where is the gas pump relay
21mm
Drinking game! every time he says "and everything" You drink.
You might not survive....lol fair warning
And everything.... lol
And everything. Lol
How do I put front wheel bearings in a 2000 goldwing?