Tip from a pro: you don’t have to shake the can in between every spray but you should wipe off the nozzle in between every spray because those cans quite often get drips on the nozzle and it shoots off blobs of paint.🎉
I have done this a couple of times. Hardest part doing it outside is keeping bugs and dust off it. But you can do as good of a job as a professional auto body shop. Just have to take your time at it.
I may have missed this but how many cans for paint were used for the project? There were three in the bucket so not sure if it took 3 cans for the entire project.
When you say color match rattle cans… do they sell certain models of vehicles actual color anywhere? My son has a 2008 Santa Fe but it’s a powder blue color
Thank you so much I just wanted to give it to my college age student my car but before they left the house they managed to mess up the bumper. Thank you so much for helping me understand because, now I can just fix up the bumper I just got off of eBay!
1a Auto guys are awesome 😎😎😎. I tried to buy a bearing and hub for a 2007 ford f150, all I found is for 4wd drive, I am wondering if 4wd drive ok for 2wd drive ??? Is there a difference between rear rotor and the front rotors?
I did that while painting my bumper still on the vehicle. Covered the headlights and the grill and just taped along the edges. Works well with just newspaper or construction paper!
Why you use a black bumper can’t really tell anything. Should have used a color where we could see the actual work. Also would have been helpful to see you scuffing it
Aw man,,,,,, you've painted "BLACK" over black plastic? Would've been better "white", or "red" or anything but black. and you didn't even show it to us, to see your good work? Plus, you went and put on the entire cans of clear coat , with out any safety glass' at all? > Shame on YOU!
Shake it more. STOP depressing the button. That is how you get runs. Hold the button down and do not let up until you are done with your passes. Aim it away if needed when you go back over it.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Tip from a pro: you don’t have to shake the can in between every spray but you should wipe off the nozzle in between every spray because those cans quite often get drips on the nozzle and it shoots off blobs of paint.🎉
Andy's engagement with the audience is very good.
Love the video, I ordered a bumper pre-primed and this is what I was looking for so I didn't have to spend excess money
I have done this a couple of times. Hardest part doing it outside is keeping bugs and dust off it. But you can do as good of a job as a professional auto body shop. Just have to take your time at it.
Not even painting anything just saw the video and i dont regret it at all need more of this guy 😂😂
I actually needed to paint my bumper and was going to get it done but I actually feel confident in this guys video to do it.
I may have missed this but how many cans for paint were used for the project? There were three in the bucket so not sure if it took 3 cans for the entire project.
The sun animation 😂
0:41 Ahhh oh my God! Oh, ok -Thanks Andy, great tips and video!
I did this once, but clear-coat looked crap, i later found out you need to sand it back, which i did two years later and it turned out not bad.
The ending was awsome
The absolute irony I actually quote "There's going to be bugs." And not another second to soon he said "ah there's a bug." Bravo.
When you say color match rattle cans… do they sell certain models of vehicles actual color anywhere? My son has a 2008 Santa Fe but it’s a powder blue color
Thank you so much I just wanted to give it to my college age student my car but before they left the house they managed to mess up the bumper. Thank you so much for helping me understand because, now I can just fix up the bumper I just got off of eBay!
You painted a black bumper black and expected us to see how it turned out? I took my bumper cover to a paint and body shop and was charged 250.
1a Auto guys are awesome 😎😎😎. I tried to buy a bearing and hub for a 2007 ford f150, all I found is for 4wd drive, I am wondering if 4wd drive ok for 2wd drive ??? Is there a difference between rear rotor and the front rotors?
Good Job Andy!
“After the last coat, allow the paint to sit for 24 hrs…”
Now let’s move to the “camping at the park” video. 😂
Greta video! Funny and informative haha. I'm going to be doing bed liner on my jeep wheel flares and roof soon. These are Great tips
Do you need to sand down the primer before painting?
I'd like to know how the paint holds up against rock chips and also high pressure washing/brushing
Good job
Great video. Thank you (careful juggling - we need you around for more videos)
Awesome video! Really funny and informative
How long should I wait before taking it to a car wash after painting it
Like the edits and animations
If only we could’ve seen it installed on the vehicle
Where do you get the spray paint to match the car?
what’s a non abrasive scuff pad ?? whey didn’t you do it to the bumper you painted ?
Paldies par informaciju 0:33
Do you apply clear coat?
Where I get the paint 😭
It would be good if we could see the quality up close. I'm assuming without sanding in between coats that it came out looking a little rough..?
What if you just used a large paper to cover that instead of taping it inch by inch? Genuinely curious.
I did that while painting my bumper still on the vehicle. Covered the headlights and the grill and just taped along the edges. Works well with just newspaper or construction paper!
Very helpful. Thank you
Anyone else expect the color to be the same as the car shown
Awesome video!
Why you use a black bumper can’t really tell anything. Should have used a color where we could see the actual work. Also would have been helpful to see you scuffing it
Had me the first 15 seconds 😂😂 car definitely not worth that much at all
No need to wet sand it?
I want to get at least most of a perfect match on my nissan bumper
The juggling act was much better then that paint job!!!😂
This was amazing.
No primer ?
رائع جدا مشكور
شكرا كثيرا
First comment great ☺️
+أبومنصور المنتصر Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I thought it was necessary to buff polish it at the end.
Thumbs up just for taping job lol
🤔 hmm seems doable .. thanks for the awesome step by step video!
Hey you teletubbie sun 🤣
Why didn’t you actually show the bumper finished? Was it that bad?
🙌💯💯💯
No I didn’t crack my bumper. I blew the entire thing off 🤣🤣
Can it be painted while on the vehicle?
1200 dollars! That's stealing
Aw man,,,,,, you've painted "BLACK" over black plastic? Would've been better "white", or "red" or anything but black. and you didn't even show it to us, to see your good work? Plus, you went and put on the entire cans of clear coat , with out any safety glass' at all? > Shame on YOU!
Idk how you did this so cheap i spend 135 just now on all the same shit
Yes you spent less than $100 to paint it, but you also painted it the same color it already was.
Comedy replacing content. At least visually show how paint job came out rather then end video
It costs $250 to paint a bumper not 1200 😅
The paint cost the same
Shake it more. STOP depressing the button. That is how you get runs. Hold the button down and do not let up until you are done with your passes. Aim it away if needed when you go back over it.
So sick of the add with the girl with the irritating voice about dog food.