Bhai mere pas whome white halogen light nhi hai but normal bright white halogen light h 100w ki to kya mein iss halogen light ko ghar par use karke robot chala sakta hun ? same robot h
I am facing a bit problem while testing with a battery. After I have attached A11, the motor is rotating (on connecting with the battery)but those red and green parts aren't. But as soon as i take out A11, the setup is totally running fine. Pls help.
Thank you for the video! Definitely better than the manual it came with 😂
Muito obrigada, o meu neto de 6 anos, está montando o robô, pelo seu vídeo.
Thank you! Fell like I’m working in SpaceX 😂
Mast yar
2:58 those + and - symbols won't fit for me
Thanks 😊 that helped alot!!!
4:06
Very nice
that helped. i was confused but i now understand.thankssssssssss!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Nice Good amazing. One more sub. I was confused how to do it, but now i watched your video and go it thanks
@@MREasyMaker Make new vids fast. I love you channel
For me my p4 thing is stuck and it won't budge. When I take the p4 thing off it works. what's the reason for this?
Thank you Thank you so much i did it it works thanks. By:-Abhimanyu
Nice bro
Maja agaya jhakas bhai
Very good from shivani
thank you.
Thanksss
Multumesc! Ca eu am un robot la fel si nu stiam cum sa îl construiesc dar tu.....tu mai ajutat
Mine didn’t come with a p3 anything that can replace it?
the p3 on top of the motor is not connecting. it’s too small. pls help
Check manual
Thanks a lot🙏🙏🙏🙏🙏🙏🙏🙏😌
🌹🌹🌹🌹🌹
How much time it should charge in sunlight?
It doesn't charge
It will work till it is kept in sunlight
Yes.
It rotates twice and the red thing falls off and it's not roatating
Ohh ok ty 👌
Bhai mere pas whome white halogen light nhi hai but normal bright white halogen light h 100w ki to kya mein iss halogen light ko ghar par use karke robot chala sakta hun ? same robot h
I opened all my gadget parts where is the p8 i cant find it
I can't remove the plastic cover on the solar panel😢
What if one engine doesn’t work? Will it still work
My white engine doesn’t work what do I do
Also when I remove that black part on the white the setup works fine but when I put it on it doesnt
Still doesn’t :(
The wire must be damaged get a new motor like this in the market
i think i did it wrong, is there a way to take it apart?
Yes
You can reconstruct it. Do the opposite.
Hey! I am facing problem when I put a11 then it not work so plz help me
when I’m using the battery the robot is working, but when I connect in the solar panel it’s not working. what might be the problwm? thank you
you may Try to see, by using hallogen light.
Bhai meri motor gum gayi hai kya aap muje motor ka linke de sakte hai olz
pls help mine got stuck and wont spin
Hey, Help Please -
When I put A11 it doesn't work only the motor spins and not the gears, Please Reply
@@MREasyMaker I have disassembled and assembled it 7 times
Same thing happened to me
Sorry for that. Please Check manual
I dont have C4, please help
Kamaal
It worked with the battery but wont work when i put it in light why?
may be sunlight is not enough for moving it.
Some parts are missing . Can I buy these parts separately? Do you deliver it to Sri Lanka?
No bro.
Its better to buy another.
Isko smooth rakhne ke liye white colour pillow hai
4:056
0:15
It isnt moving for me
It's not working
Assemble properly
Why mine is going bacward🤔
I am facing a bit problem while testing with a battery. After I have attached A11, the motor is rotating (on connecting with the battery)but those red and green parts aren't. But as soon as i take out A11, the setup is totally running fine. Pls help.
I facing the same problem
@@Mitsuki1765-m1n same, did you figure it out?
you have to clip off the excess plastic from the grid
Same
the gray part, u need to cut it and make sure there’s no grid
I try but deed not working
Why does mine is not rotating? I do it so hard 😢
First take that black thing and use sand paper to decrease the size only little bit now check it again I hope it works
Yep or trim the plastic edges
Use nail cutter to cot edges
I have used in all parts while cutting them❤
It moves two times then stops
Yes the red thing falls off
Mine moves backwards 😂😂😂😂
interchange the wire
nahi ho raha plz solution
Hi I lost p3 piece now what should I do?
У меня всё точно также но во время света он сам
не едит
Bhai mera proper work nahi kar raha.hai kya karu. Even in the sunlight.
I can't make it up
Follow manual please.
Se debe quitar el plástico que trae el panel solar?
Wires bruh
Chup chap beth
😉😉😉😉