Half a day for one side, 2 hours for second, including filming. How did I do? 👇 *Ps, the jack stand is always under every car I work, I'm paranoid when it comes working under a car. :D But safety first too.
These days YT is a sea of overconfident,shouty,omglookatme,rich "influencers" and whatnot. Your channel is really refreshing as it's the opposite of all that .. a normal person for once. Keep up the good work on your Corrado. Alway's liked the look of those cars when i was a teenager and seeing these on the road. Best of luck with the car and the channel.
Oh wow, thank you so much!😊 I’ve actually have had thoughts that oh I’m not over the top happiest human being doing crazy fun stuff to watch.. but what if it’s a good thing.. In every way your words are here at the right time, thank you.🙌🏼
Aww, thank you, it’s nice to hear. Soft spot, yea me too, even 7 years later of owning one. Just today I looked in the parking lot at our car club meet that damn, beautiful car.
WELL DONE ,please keep up with your videos. Your English is exceptional, your subscriptions are going up due to your enthusiasm and your willingness to learn.I wish my daughter would show your enthusiasm with learning about cars.. Thank You Keidi.👍👍
@@KeidiandCarsYes they are pretty good cars I think. Body and motor. But old. Other things will break sooner or later. I am replacing the powerwindow motor now. Never did that before also. So both will be wiser after these jobs😊
Great job! Happened across your channel and subbed. 👍 If I may offer one suggestion... be extra careful when using an impact on nice wheels and always use a torque wrench when reinstalling.
Two things . You need to “pack the bearing”. Get grease on your hand ( wear a 🧤 glove) and force grease into the bearing like it’s eating it like a shark. Not put grease on only the roller’s . And yes the corrado light switches love to break . I don’t know if you can use the early corrado or the golf mk2 light switch because the wiring might be different and the plastic liner looks like a T or an L prevents you from using the wrong light switch Over all great video ! What made you want to own and drive a corrado ?
Yeah, I put grease everywhere generously. As far as I know no other switch suite, and mine is later style as well, so cover is different to earlier Corrados. Thank you! Well, to be honest, the only reason at start was the 2.9 vr6. If it were 2.8 I wouldn’t have picked it.😀 And well, I doesn’t hurt the eye looks wise..😀 Of course when I got it, the whole car grew on me day by day and even 7 years later I look outside from home to get a peek of how beautiful this car is. And so enjoyable to drive and to handle. And to hear😏.
Sehr gute Arbeit wieder. Am besten nach einiger Fahrzeit Kilometer nochmal hinten das Radlagerspiel kontrollieren. Und gegebenenfalls nachstellen. Grüße vom Kanal Zellmers-Garage 😊
Be careful for your bearings, it's better tighten nut with whell and you must tighten for max after your disk doesn't spin, loosen nut after you have play and little tighten when play goes away. Otherwise, the bearing can be destroyed. A fitted and tightened wheel should not have play, but should not rub. Every other successful work connect you with your project. Many lovely vr6 kilometres over the steering wheel.
Väga tubli! Selliste poltide jaoks mis ei taha lahti tulla , soovitaks muretseda torujupp mis mahub võtmesaba peale, saad jõuõlga juurde ja suure tõenäosusega saad poldi lahti, igale poole küll toruga ei mahu aga hea abivahend ikka!
When you're talking about special tools for the calliper you shouldn't need anything special. You just need a c clamp so you can push the pistons back in if you were to do the brakes. They do make brake calliper tool sets if you did want to go that route but imo a c clamp works fine and if your car doesn't need the special kit I wouldn't get it!
Always, they are under there. Yeah I meant the caliper tools, I’m not much of an inventor with tools, I was told I could do it with slip joint pliers too.. but if there’s a special thing that makes my life easier then I prefer it.😀 Thanks!
Half a day for one side, 2 hours for second, including filming. How did I do? 👇
*Ps, the jack stand is always under every car I work, I'm paranoid when it comes working under a car. :D But safety first too.
These days YT is a sea of overconfident,shouty,omglookatme,rich "influencers" and whatnot. Your channel is really refreshing as it's the opposite of all that .. a normal person for once. Keep up the good work on your Corrado. Alway's liked the look of those cars when i was a teenager and seeing these on the road. Best of luck with the car and the channel.
Oh wow, thank you so much!😊 I’ve actually have had thoughts that oh I’m not over the top happiest human being doing crazy fun stuff to watch.. but what if it’s a good thing.. In every way your words are here at the right time, thank you.🙌🏼
Inspiring!!! Keep it up
This is what UA-cam is about, great to see people just trying to do something new, especially on such a great car, well done keep it up!
Thank you so much!🙌🏼
Keep it up, love seeing the progress and the improvements this channel is constantly showing.
Yess, thank youu!🙌🏼
Your channel is refreshing. Always had a soft spot for the vw corrado
Aww, thank you, it’s nice to hear. Soft spot, yea me too, even 7 years later of owning one. Just today I looked in the parking lot at our car club meet that damn, beautiful car.
Great work, love your car👌👍
Thank you! 🙌🏼
WELL DONE ,please keep up with your videos. Your English is exceptional, your subscriptions are going up due to your enthusiasm and your willingness to learn.I wish my daughter would show your enthusiasm with learning about cars.. Thank You Keidi.👍👍
Wow, thank you, this is sa encouraging.💪🏼
Nice to see you work on the car again💪
It’s beginning to look like I can’t work on anything else, since Corr always has some problems.😂
@@KeidiandCarsYes they are pretty good cars I think. Body and motor. But old. Other things will break sooner or later. I am replacing the powerwindow motor now. Never did that before also. So both will be wiser after these jobs😊
Great job! Happened across your channel and subbed. 👍
If I may offer one suggestion... be extra careful when using an impact on nice wheels and always use a torque wrench when reinstalling.
Thanks, good thoughts, and welcome!🙌🏼😊
Two things . You need to “pack the bearing”. Get grease on your hand ( wear a 🧤 glove) and force grease into the bearing like it’s eating it like a shark. Not put grease on only the roller’s .
And yes the corrado light switches love to break . I don’t know if you can use the early corrado or the golf mk2 light switch because the wiring might be different and the plastic liner looks like a T or an L prevents you from using the wrong light switch
Over all great video ! What made you want to own and drive a corrado ?
Yeah, I put grease everywhere generously.
As far as I know no other switch suite, and mine is later style as well, so cover is different to earlier Corrados.
Thank you!
Well, to be honest, the only reason at start was the 2.9 vr6. If it were 2.8 I wouldn’t have picked it.😀 And well, I doesn’t hurt the eye looks wise..😀 Of course when I got it, the whole car grew on me day by day and even 7 years later I look outside from home to get a peek of how beautiful this car is. And so enjoyable to drive and to handle. And to hear😏.
You can say like in song : every day i see my dream 🙂
Take Care about your Health an put a spare tire or something else unter your car, dont trust this lonley lifter. keep on going :)
Ofcourse, jack stands are always under the car, I don’t ever trust lifters alone.😊 Maybe it wasn’t seen on the video, but it was there.
Sehr gute Arbeit wieder.
Am besten nach einiger Fahrzeit Kilometer nochmal hinten das Radlagerspiel kontrollieren. Und gegebenenfalls nachstellen.
Grüße vom Kanal Zellmers-Garage
😊
Yes, I will, thank you!🙌🏼
Be careful for your bearings, it's better tighten nut with whell and you must tighten for max after your disk doesn't spin, loosen nut after you have play and little tighten when play goes away. Otherwise, the bearing can be destroyed. A fitted and tightened wheel should not have play, but should not rub.
Every other successful work connect you with your project. Many lovely vr6 kilometres over the steering wheel.
Thanks for your thoughts and wishes!🙌🏼😊
Väga tubli!
Selliste poltide jaoks mis ei taha lahti tulla , soovitaks muretseda torujupp mis mahub võtmesaba peale, saad jõuõlga juurde ja suure tõenäosusega saad poldi lahti, igale poole küll toruga ei mahu aga hea abivahend ikka!
Rattapoltidel olen kasutanud jaa kui häda käes, aga jaa, peaks varuma. Kunagi pole head suurust mis sobiks, kui kohe vaja.😅Aitähh!😊🙌🏼
Oi,Eesti kanal☺️
Niivõrd kuivõrd jah.😀 Veel kaalun kas kuidas mis aja eest teha Eesti kanal kõrvale..
When you're talking about special tools for the calliper you shouldn't need anything special. You just need a c clamp so you can push the pistons back in if you were to do the brakes. They do make brake calliper tool sets if you did want to go that route but imo a c clamp works fine and if your car doesn't need the special kit I wouldn't get it!
Also please use jackstands!!! It doesn't seem like you have any under the car but I could be wrong
Always, they are under there.
Yeah I meant the caliper tools, I’m not much of an inventor with tools, I was told I could do it with slip joint pliers too.. but if there’s a special thing that makes my life easier then I prefer it.😀 Thanks!
Muidu igasuguste plastikjullade jaoks võib mõelda 3d printimise peale.
Yea, olin juba läbirääkimisi pidanud 3D asjus, proovisin esmalt nii.👍🏼
tubli oled tore vaadata kohe kui hingega asja juures
Oe, aitähh!😊