I was just given several old Cisco Aironet 1200's and couldn't do anything with them till I watched your video (directed here from bleeping computer forums). Now they are all working and giving me EXCELLENT connections everywhere. Thank you very much for the video.
THIS is what was needed. Spent an hour lastnight attempting to "wing it" through WPA2 AP Setup myself, then remembered... I'm not a CCNA. LOL Thanks a TON for the straight forward setup tutorial man.
Just replaced a bunch of 1240AG series AP's at work and a couple of them found their way home to me. =) Found your "quick install"-guide helpful. Not used to Cisco AP's so a little starter help is always useful considering the ton of options in these buggers. Thanks for a good and straight-to-the-point video.
Hi, I just wanted to say thank you for this guide. This helped me with setting up my 1041 cisco AP, which seemed impossible at first with all the different settings availible.
thank you very much! your method works great! in my case, I connected the AP to the Router's SW, so I don't have to define the IP manually. all the following steps were all successful. I configured with your method, a Cisco AIR-CAP2602i-E-K9. Thank you so much ☺️
You have saved me so much time with this video. I didn't know what a RADIUS server is and whether I would need one. I almost gave up. This was as straightforward as it could be. Thank you so much!
Gracias men. Me ayudo mucho, no tengo el mismo que el tuyo pero tengo el aironet 2600 series y pude configurarlo con tu explicacion. Aunque no se nada de ingles. Rep. Dom.
THX VERY MUCH Raj ! I could do the same the day before but I spent hours to do it (struggling with all of those parameters) ! I should have seen your explanation before... Thx
Wow! I spent a whole night fighting with setting up the SSID. I kept trying to figure out different VLAN settings. Phone wouldn't connect. Followed your tutorial and it worked first try! Just a note, there is no express security set up screen on the menu of the 3502, but if you type in the address into the address bar (ap_express-security.shtml), the page is totally still on the device! :-)
Thank you Raj, really great guide to setting up AP in standalone mode. Why can't Cisco do a basic setup guide like this, Got mine working in minutes following your guide. :)
It is possible configure two or three different SSIDs with each VLANs connected straight to the router? I mean without have any kind of switch to make trunk between them
hello, i can ask you a question, i have a cisco aironet series 2600, but i need to configure one of them as repeater, i dont find much information about it, do you any time configure some acces point as repeater???. Thank You for you attention
Why if i change the radio0-802.110 enable without intenet connection that is cannot changes. Does it require internet connections for the change radio from disable to enable?
Hi ! I'v got a lightweight version of this AP from my friend and was wondering if it going to work with usual routers (like dlink or netgear) ? I know i'll have to change the IOS to autonomous but can't find the info if it works with normal nouters. Thanks !
I have a problem, I done this porcess its work fine for 2 AP, but in one AP i change from Light weight to Auto .. The BVI interface is not showing. why is that ..
i have a question I keep getting error ap#(conf t) .. I get an IP from router Verify You can use the show capwap ip config command in enable mode to view the CAPWAP configuration present on the LAP. LWAPP Static IP Configuration IP Address 192.168.1.5 IP netmask 255.255.255.0 Default Gateway 192.168.1.1 But I can not config it to work AP0022.bd1a.3467#configure terminal ^ % Invalid input detected at '^' marker. need help
well mine does nothing when i press apply and it does not save any settings ether....also menus are missing here and there...yeah...it got tossed in the bin...
can someone tell me how to upgrade firmware for AIR-AP2802I-B-K9 from u-boot please please ... all i see when booting is ap is in critical condition and other weird stuff and there is no network
cisco air-cap2702 I connetct the consol port to my pc... but cant connect to AP why?! Ap uses a injector... poe... and the led is green... but i cant acces it... help pls
I have problem with my ap 1702i converted to form w8 to w7 ..all working but when i log in gui a can do anything but when i apply or save config. Only i have message 404 not found Any tip TNX
Configuring a 1040 and getting error when setting to WPA2: WPA requires 'Network EAP' or 'Open Authentication' with EAP or 'Open Authentication' with 'WPA Pre-shared Key'.
Back in the SSID Manager, there are separate check boxes for the different radio's. Make sure both are checked, then verify that you can now hit the apply button to enable the radio. I had the same problem and fixed it by retracing my steps.
Why Cisco made this GUI so complicated ? !!! The Aironets size is huge but the signal range and performance is comparatively merely above average. The Aironet's WiFi connectivity drops frequently...
I was just given several old Cisco Aironet 1200's and couldn't do anything with them till I watched your video (directed here from bleeping computer forums). Now they are all working and giving me EXCELLENT connections everywhere. Thank you very much for the video.
Absolutely fantastic! Informational, to the point, no crappy background music and no dragging things out.
THIS is what was needed. Spent an hour lastnight attempting to "wing it" through WPA2 AP Setup myself, then remembered... I'm not a CCNA. LOL Thanks a TON for the straight forward setup tutorial man.
THANK YOU SO MUCH....I couldn't figure out how to enable WPA2 security. You are EXCELLENT at explaining step-by-step. Thanks again.
Just replaced a bunch of 1240AG series AP's at work and a couple of them found their way home to me. =)
Found your "quick install"-guide helpful. Not used to Cisco AP's so a little starter help is always useful considering the ton of options in these buggers. Thanks for a good and straight-to-the-point video.
Thanks for this guide, even here 5 years later - i had succes configuring my old 1142N AP to meet the request for modern Wifi :) :)
Wow, from a true expert. These Cisco's can't be done by amateurs not really knowing what they're doing.
Hi, I just wanted to say thank you for this guide. This helped me with setting up my 1041 cisco AP, which seemed impossible at first with all the different settings availible.
Thanks a lot. I found someone throwing out a wap and managed to configure it all thanks to you :P
thank you very much! your method works great! in my case, I connected the AP to the Router's SW, so I don't have to define the IP manually.
all the following steps were all successful. I configured with your method, a Cisco AIR-CAP2602i-E-K9.
Thank you so much ☺️
It is very useful for me and thanq so much sir keep sharing this type of videos
Thanks👍I never heard before like this faster talking but very clear explanation😁
Thank you, haven't done this for a while and this was all I needed. Wish I found this video first. :)
You have saved me so much time with this video. I didn't know what a RADIUS server is and whether I would need one. I almost gave up. This was as straightforward as it could be. Thank you so much!
Excellent. As others have stated, no crappy music or waffle. Direct and to the point. Well done.
And what is more it works!
Gracias men. Me ayudo mucho, no tengo el mismo que el tuyo pero tengo el aironet 2600 series y pude configurarlo con tu explicacion. Aunque no se nada de ingles. Rep. Dom.
Tengo un aironet .... me puedes apoyar para configurarlo.... entendí todo ...pero no me pierdo , no puedo entrar a la página para configurar
You're the best Raj, thanks for your Tut
Simple and straight forward, this really helped, thanks for sharing!
Great Video demonstration,. Excellent clear explanation. Massive thumbs up to the maker of the video!
I second what Darrell says. You explained SO WELL exactly what I needed. Thanks!
I guess this vid will gain more traction now, when these devices are officially EOL. Thanks for your vid, it will save some devices form landfill.
THX VERY MUCH Raj ! I could do the same the day before but I spent hours to do it (struggling with all of those parameters) ! I should have seen your explanation before... Thx
Wow! I spent a whole night fighting with setting up the SSID. I kept trying to figure out different VLAN settings. Phone wouldn't connect. Followed your tutorial and it worked first try!
Just a note, there is no express security set up screen on the menu of the 3502, but if you type in the address into the address bar (ap_express-security.shtml), the page is totally still on the device! :-)
Excellent instructional... very clear and loved the stepbystep! Peace
Thanks for this clear and practical video. You made my day man!
Thanks for your help, you saved me a lot of headaches!!!!!
Thanks, your video was exactly what I was looking for, very helpful
thanks man , this was a very nice video lesson to me and you saved my day.
I like your video, it was straight forward and concise. Great job!
Thank you Raj, really great guide to setting up AP in standalone mode. Why can't Cisco do a basic setup guide like this,
Got mine working in minutes following your guide. :)
Thanks! Very well spoken and easy guide
you are the best . Excellent training Thank you so much.
Such a good guide. Thanks heaps mate! working on my aironet 3600
Really you are the best one and if i can say more then thanx i will do it thanx toooooooooo much my brother
You saved me a lot of time. Thank you!
Thanks you so much from Adana Turkey
This was just perfect! Thanks a lot.
Good Video. Well presented. Thank You.
Thanks you so much, U R great person... others had share bullshit videos....
thank you so mutch, realy liked the video
Great Video - you wouldn't have a GUI tutorial on how to configure VLANS?
At 1:43 what did you give command to go out from the terminal
Thanks
are you using a serial cable to connect via Putty?
Life saver. Is it better to have one ssid for both networks or two 2,4 and 5ghz? What about range versus speed?
It is possible configure two or three different SSIDs with each VLANs connected straight to the router? I mean without have any kind of switch to make trunk between them
Just what I needed, thanks
hello, i can ask you a question, i have a cisco aironet series 2600, but i need to configure one of them as repeater, i dont find much information about it, do you any time configure some acces point as repeater???. Thank You for you attention
You deserve Like and Sub
Billions of Thanks for sharing such a beautiful video.
You make my Day.
Thanks very straight foward tuto
Thanks this video was very good, do you have a more advanced video showing us some of the more advanced features? I have a Cisco Air 3702
Any luck? My 3702 doesn't work
Is this any different if the main router is also providing wifi and the WAP is going in further away in an area with no current coverage?
Does Cisco Aironet 700W access point have this type of built-in web-interface or does it need a controller?
Is it possible to setup a local dhcp server on the AP through the GUI É
How do you set up Putty? Are you connecting the AP Ethernet to the Laptop or Router? Are you using a Console cable to the laptop? Thanks
thats what I want to know too
What about the WPA3, can we move forward with it on this AP?
Why if i change the radio0-802.110 enable without intenet connection that is cannot changes. Does it require internet connections for the change radio from disable to enable?
Thank you from Chile.
Excelente !!! me ayudo mucho
Whatever you do, do not isolate devices between the SSID. Unless you're purposely setting up a secure guest network.
Muchas gracias, me ayudo mucho
Excellent!! Thank you so much!
Hi ! I'v got a lightweight version of this AP from my friend and was wondering if it going to work with usual routers (like dlink or netgear) ? I know i'll have to change the IOS to autonomous but can't find the info if it works with normal nouters. Thanks !
Thanks for Helping...
Thanks mate, good job !!
Great video, helped configure my ap and my laptop connects but my mobile device will not.. any ideas why ?
hello, I have a Cisco Air-ap1242-g-k9 Access Point, it gets ip from red but I can't access it via web to configure
I'm a bit confuse. Is there AP has its own IP Address ? Search from web AP doesn't has its own IP address , it may cause IP collision .
Thank you, very helpful
I have a problem, I done this porcess its work fine for 2 AP, but in one AP i change from Light weight to Auto .. The BVI interface is not showing. why is that ..
How do we identify the type and model of Antenna connected to Autonomous AP.. Ex - AIR-AP1231G-E-K9.
I got everything done but I cant reach the web GUI. When I try to reach the IP adress, my browser tells me "ERR_CONNECTION_REFUSED"
Oh, thank you very much!
Hello
How can we convert Cisco Aironet 1815i in to GUI.
Hi, on autonumus system ap could be a dhcp server?
Hi; How can you configure the DNS sever to 8.8.8.8, rather than the default gateway please?
Nice guide, helped alot but i really hate the sound of limp smacking.
i have a question I keep getting error ap#(conf t) .. I get an IP from router
Verify
You can use the show capwap ip config command in enable mode to view the CAPWAP configuration present on the LAP.
LWAPP Static IP Configuration
IP Address 192.168.1.5
IP netmask 255.255.255.0
Default Gateway 192.168.1.1
But I can not config it to work
AP0022.bd1a.3467#configure terminal
^
% Invalid input detected at '^' marker.
need help
Great Video !!!
I have Cisco Aironet 3502e, but when I entered en for enable, the system says, unknown command
well mine does nothing when i press apply and it does not save any settings ether....also menus are missing here and there...yeah...it got tossed in the bin...
can someone tell me how to upgrade firmware for AIR-AP2802I-B-K9 from u-boot please please ... all i see when booting is ap is in critical condition and other weird stuff and there is no network
how to access the GU web console. When I put in the ip to access the AP. I get error 404 how to fix?
cisco air-cap2702
I connetct the consol port to my pc... but cant connect to AP why?!
Ap uses a injector... poe... and the led is green... but i cant acces it... help pls
Can you link Cisco AP 1260 with Tplink WiFi router wirelessly.
I´m trying to configure an air cap 37021i on this way , but the ip dont change . ;(
cisco 2602i ap gui: I have same IP address, I don't have a wifi router but i directly plug that into pc. GUI does not works
For some reason there is not "interface command" in mine...I am not sure what is going on....
I have problem with my ap 1702i converted to form w8 to w7 ..all working but when i log in gui a can do anything but when i apply or save config. Only i have message 404 not found
Any tip
TNX
same here.
When I connect the console cable between my laptop and the Cisco AP, I cannot type anything in the PuTTy terminal can someone help me please ?
Do you see any output on the console during boot up?
Configuring a 1040 and getting error when setting to WPA2:
WPA requires 'Network EAP' or 'Open Authentication' with EAP or 'Open Authentication' with 'WPA Pre-shared Key'.
I'm also getting that problem. Can't find a way aroun it, did you?
plz any help about a raduis configuration ??!
Como faz para remover a senha de autenticação do SSID ?
if it's possible,
please make another video using CLI
Thanks a lot .. now i can sleep :)
Thank you so much bro!
I love you!!!
Thanks for the information
the apply button dose not work :(
Back in the SSID Manager, there are separate check boxes for the different radio's. Make sure both are checked, then verify that you can now hit the apply button to enable the radio. I had the same problem and fixed it by retracing my steps.
need help config t (configure terminal ) error invalid input detected at marker
Why Cisco made this GUI so complicated ? !!! The Aironets size is huge but the signal range and performance is comparatively merely above average. The Aironet's WiFi connectivity drops frequently...
hi i cant detect ssid on my dell laptop but can detect using my phone. What is the cause of this?