I have only just found your channel, and I have learned so much already. I have been a welder for nearly 30years and I have recently found time to restore some classic vehicles so it was time to up my sheet metal game. Thanks from the U.K. 🇬🇧🇺🇸 I will be sharing your content with everyone I know and liking and commenting for the algorithm
Man I love hearing your thought process when you are making a custom part or piece. Your spatial ability and then putting on the panel or the car is a gift. love watching you work through each project. Great content, and can hardly wait to see the dropped Caddy1
Very nice job, don't listen to folks about the background music. It's fine. You kept it at a very low level, so it wasn't a distraction. Thank you for your time and expertise!
I know I sound like a broken record with my comments, but what awesome work you do. You can really see how much you enjoy your craft. Keep em comming Karl I'm hooked.
Cuzin Karl you’re one skilled cat! Thanks for sharing your knowledge with us common folk lol. There’s a lot of skilled people out there on the ole interwebs, but very few are willing to share what they’ve learned while polishing there craft.
You’re so welcome man thank you! When I was growing up learning this trade was very difficult because there was not much for UA-cam that I was aware of. I made many mistakes and struggle to find the answers I was looking for. I’m grateful for the community and UA-cam itself to allow this type of sharing and learning to happen
@@MakeItKustom I agree with Clint. I am building a 56 Merc mild custom. Some of the old timers do not really want to share the knowledge. UNLESS you do something wrong. They will tell you right away how wrong you did something but when I am asking for help on how to do something... Crickets. Enjoying the videos. Keep it up.
Clint Vaughn ~ Its because we ARE ol' cats that eat, sleep, no drink(lol), and work all the time.... unless we watch the new PUPS on the net! Must say we do it with different tooling we turn per application, we have 47 sets as of late. Have to say that I appreciate your results and dedication to the craft! KUDO'S! Seth Earned my script brother!
I found this channel about a week ago and can't get enough of it! Great positive attitude coupled with amazing content. I'll be following along closely for future videos.
It's always great to watch a pro. You make it look easy, but I know just because it looks easy it means were watching an expert. Good for you, work hard and be a good boy!
Love how organized and clean your shop is! I'd love to be able to do this on a car, but don't have the patience. Thanks for sharing! Nice clear filming.
I'm not sure how guys like Jesse james got crowned best fabricators in the world when there are world class metal workers like you out there. Your knowledge, skill, and attention to detail are outstanding! I love that you build most of your machines and tools also to show us guys on a budget how we can get professional results with homemade tools.
Your videos are a breath of fresh air. Standing out of the crowd of time eating mindless videos that make me feel good till they are over and I feel guilty for watching them. I end up with a feeling of motivation to work on my projects after your videos.
Awesome stuff man. Y'all are making some EXCELLENT material, I'm learning tons, and You're removing a lot of the Mystery of how some things are done. Keep it up man!
And I hope you are charging big money for it...I don't envy a single piece of equipment and a single minute of passing each and every line under the wheel on this one... exhausted from watching alone...that said, excellent job!
I love you videos more then any custom work on utube currently. So much good insightful tips. Thanks so much for sharing the knowledge it helps the back yard builds so much.
Very happy to have found your channel.. Just starting metal but already feel at home sort of with all this. Thanks so much.. first time comment but watched about 15 videos.. I just did not know what to say other than.. Thanks Carl.. fantastic work.. great teacher.. great content.
great stuff and love the technique. Have you ever done any engine turning design on the door panel prior to bead rolling? I think that would be pretty neat
This channel is really amazing! I have a 66' Ford Fairlane that I want to rebuild but have never welded or done any metal work. Once I get my equipment I'll definitely use these videos to do practice pieces before I get into the build.
Mines an AC motor from a garage sale lol I definitely need a DC motor one day but I couldn’t say no to 10 bucks ha ha Eastwood has a motor set up that I would like to adopt
so happy i fund ur channel. i love sheet metal fab and welding but havent don it in a few years cause my shop was robbed and i lost EVERYTHING!u just lit a fire under my ass and made me remember my passion for it.i have a few hammers and a dolly so im going to get out there and start working sheet metal again. great channel dude,i have worked with some of the best and u have a great talent and im glad to see u doing this yourself instead of making someone else rich,lol.
Hello Karl, I'm a fellow Canadian metal fabricator in Ontario, near Toronto. I just got home this week after major surgery. The correction that you made, and the added excerpt of Will Ferrell had me laughing out loud, and I really want to thank you for that! Excellent instructional video as well. If you are out my way, you and your travelling partner(s) are welcome here for a high quality beef BBQ. It'll be my way of supporting your channel, and you'll get to see what's going on over here. Thanks, Dave.
You have a great natural camera presence, easy to listen to and follow keep it going, you are showing your talent well and your work is impressive to say the least
Just came across your channel 4 days ago and watched many episodes already. I met/saw many people that like to (TALK THE TALK) and a very few like you that ( WALK THE WALK) . YOU ARE NATURALLY VERY TALENTED AND GIFTED INDIVIDUAL. I have learned something new with every single episode you guys post. Kudos to camera lady and you for the great content ... keep it coming ... much respect from sunshine state.
Your look of concentration at 18:15 is absolute gold! 😂 love your videos! Thank you so much for taking the time to do these and share your knowledge. Definitely be using what i learned on my 48 flatfender jeep! Hello from Washington state!
Oh man I like finding quality content like this, where the people know their shit, present it well, and do it without a massive shop full of the latest and greatest tools or some sponsored bullshit. Keep 'em coming!
I have been a fabricator professionally for over 30 years but never have I stepped into sheet metal and I truly love it. I am just going to have to get more tools and learn it. you do amazing work I was actually directed to your channel by one of my subscribers Brothers Custom Builds. I love your content I am glad to have found your channel. I'm building a 78 J10 on UA-cam and right now its a blank canvas looking for people interested to follow and direct the build with comments on my short comings. I I am at the beginning of a couple other builds also that I am just getting started on videoing. Thanks for your content its priceless.
17:40 that looks really close to fitting my 32 Chevy coupe 5 window. I’m really paying close attention,because when I’m ready I wanna know exactly what I’m doing. An that’s exactly what I want. I about shit my self when I initially found this channel and was this guy Carl is Sharing hot rod secrets. That’s worth it’s weight in gold. Thanks Carl!
I’m a fan of fabricating and cars and build most of my own stuff, but I’ve never bead rolled at all yet found myself enjoying this video from beginning to end! Great job man, very talented!
Man you nail it. Between your demos and explanation, you almost convince me that a dumb ass like myself could do it. Your finished results look press moulded and damn near perfect, if they're not actually perfect. Thanks for the insights.
Been watching a few of your videos and I must say your wife does a great job of the camera work. Her work let's you really see what you are explaining.
Great job. And the explanation what you have to do to start, and the correct setup for the dyes to get the look you want. If you don’t take your time and think it through how easy it would be to screw up the panel and all the hard work you just did. I’m amazed that just a few bead rolls can stiffen up the panel so quickly, now I see why you run them in floor panels for stiffness. Thanks. Later
Much more informative than the "professional" custom shows. Good job, great explanations and demonstrations!
Thank you so much! I appreciate this feedback!
If this isn't "professional" then nothing is.
That door handle editing bit was an AMAZING way to address the little slip ups. Made it part of the show. The rewind in particular was golden.
Ha ha thanks so much Kristina is very creative with her editing I love what she does
Gorgeous! Those brass panels are fire! Appreciate you taking the time to show this.
Thanks so much man I love the rolling brass I want more of it!
I have only just found your channel, and I have learned so much already. I have been a welder for nearly 30years and I have recently found time to restore some classic vehicles so it was time to up my sheet metal game. Thanks from the U.K. 🇬🇧🇺🇸 I will be sharing your content with everyone I know and liking and commenting for the algorithm
Ha sorry 🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦🇨🇦
Man I love hearing your thought process when you are making a custom part or piece. Your spatial ability and then putting on the panel or the car is a gift. love watching you work through each project. Great content, and can hardly wait to see the dropped Caddy1
Thanks so much for the feedback man I appreciate it I can’t wait for the next push on the caddy!
Very nice job, don't listen to folks about the background music. It's fine. You kept it at a very low level, so it wasn't a distraction.
Thank you for your time and expertise!
I know I sound like a broken record with my comments, but what awesome work you do. You can really see how much you enjoy your craft. Keep em comming Karl I'm hooked.
Awesome Brian thank you!
Thank you, is quite rare people uploading real speed beadrolling videos, appreciated!
You’re so welcome!
Cuzin Karl you’re one skilled cat! Thanks for sharing your knowledge with us common folk lol. There’s a lot of skilled people out there on the ole interwebs, but very few are willing to share what they’ve learned while polishing there craft.
You’re so welcome man thank you! When I was growing up learning this trade was very difficult because there was not much for UA-cam that I was aware of. I made many mistakes and struggle to find the answers I was looking for. I’m grateful for the community and UA-cam itself to allow this type of sharing and learning to happen
@@MakeItKustom I agree with Clint. I am building a 56 Merc mild custom. Some of the old timers do not really want to share the knowledge. UNLESS you do something wrong. They will tell you right away how wrong you did something but when I am asking for help on how to do something... Crickets. Enjoying the videos. Keep it up.
Clint Vaughn ~ Its because we ARE ol' cats that eat, sleep, no drink(lol), and work all the time.... unless we watch the new PUPS on the net! Must say we do it with different tooling we turn per application, we have 47 sets as of late.
Have to say that I appreciate your results and dedication to the craft! KUDO'S! Seth
Earned my script brother!
Excellent video enhanced by Christina's videography and editing.
Thank you she’s really killing it on the edits and the camera work I couldn’t do any of this without her
Your a great teacher man! Thanks for sharing your education.
You’re welcome man! Thank you so much for watching and supporting!
Amazing work m8 after 50 years of metal bashing im still learning things from you but we need to see more of the beautiful christina !
I found this channel about a week ago and can't get enough of it! Great positive attitude coupled with amazing content. I'll be following along closely for future videos.
Wow Raymond thank you! I appreciate the feedback and welcome to the channel!
And now everyone knows why custom anything costs a pretty penny or two, Fantastic workmanship, and a delight to watch.
Thanks for sharing
I love your technique especially when you explain the logic! Thank your sir you’re doing some amazing work!
Thank you so much I’m glad my explanations makes sense lol!
My god...every time I watch your videos I am amazed
Ha ha thanks so much!
Another excellent video, thank you for sharing your skills & knowledge ! Great job by Kristina on camera and keeping you straight ! 😂
Ha ha ha definitely couldn’t do it without her! Thanks for watching cheers!
It's always great to watch a pro. You make it look easy, but I know just because it looks easy it means were watching an expert. Good for you, work hard and be a good boy!
Thanks man that’s the plan! Cheers
Love how organized and clean your shop is! I'd love to be able to do this on a car, but don't have the patience. Thanks for sharing! Nice clear filming.
Thanks Brian 🙏🙏🙏
Finally, someone has made an in depth video illustrating how to do this work. Thank you, sir! and your helper too!
Always fun watching a true artist do his/her thing! Thanks for the education.
You’re so welcome!
These are so cool. I never would have thought that was how those shapes were made.
I'm not sure how guys like Jesse james got crowned best fabricators in the world when there are world class metal workers like you out there. Your knowledge, skill, and attention to detail are outstanding! I love that you build most of your machines and tools also to show us guys on a budget how we can get professional results with homemade tools.
Why cause drama, and Jesse is one of the best fabricators. Do you always drag up decades old news?
Your videos are a breath of fresh air. Standing out of the crowd of time eating mindless videos that make me feel good till they are over and I feel guilty for watching them. I end up with a feeling of motivation to work on my projects after your videos.
Thank you so much for the feedback! I am very glad to hear this. Cheers!
Awesome stuff man. Y'all are making some EXCELLENT material, I'm learning tons, and You're removing a lot of the Mystery of how some things are done. Keep it up man!
I agree. What a great teacher.
And kudos to the camera lady 😅
Thanks so much! We are learning lots along the way and appreciate you all watching!
And I hope you are charging big money for it...I don't envy a single piece of equipment and a single minute of passing each and every line under the wheel on this one... exhausted from watching alone...that said, excellent job!
This is fantastic!! It's like going to trade school or college to learn how to do this only for free. Excellent tutorial.
Thanks Thomas!
the panels look great !! i think i learned something new today keep up the great work Karl.
Thanks so much I’m glad you’re learning some!
Fine piece of carrying on! The layout alone is pure art!
Wow man thanks so much !
thanks man, I enjoyed the lesson.. I'll be back for more.
Awesome thanks cheers!
There's not many people whose metal working skills I admire, but you got my thumbs up.
Thanks man appreciate it!
Love the part with Will Ferrell
Ha ha me too!
OMG! That door handles / door panels bit was hilarious! Kristina obviously has a great sense of humour. Keep up the good work you two!
Ha ha ha it’s my favourite part of any of the videos so far lol
Super Arbeit! Du bist ein Spitzen Blechkünstler 👍
Sehr schöne Videos - weiter so 🙂
I like your style, no loud music and clear and concise explanations.... you gained a sub!
Awesome Mike happy to have you! Welcome to the channel thanks for watching
Awesome work & skill , love the channel & cool builds 👍
Thank you glad you’re enjoying it!
I love you videos more then any custom work on utube currently. So much good insightful tips. Thanks so much for sharing the knowledge it helps the back yard builds so much.
the will Ferrell cut got me 🤣
Jajajjajaajja lol
Ha ha ha ha I burst out laughing when I saw her cut that in! Gold
Built official in the house!!! 🤘
I know right?! I'm cryin' right now! Hahahahaaa.....
Very happy to have found your channel.. Just starting metal but already feel at home sort of with all this. Thanks so much.. first time comment but watched about 15 videos.. I just did not know what to say other than.. Thanks Carl.. fantastic work.. great teacher.. great content.
great stuff and love the technique. Have you ever done any engine turning design on the door panel prior to bead rolling? I think that would be pretty neat
I haven’t done much engine turning but I bet that would look awesome. Thank you cheers!
@@MakeItKustom right on I'd like to get into it myself and no problem keep up the excellent work sir!
@@scottroe1087 I might have to steal your idea, Scott. That could either look really busy and it could look incredible!
This channel is really amazing! I have a 66' Ford Fairlane that I want to rebuild but have never welded or done any metal work. Once I get my equipment I'll definitely use these videos to do practice pieces before I get into the build.
haha I would suffer if I didn't have variable speed, is you motor a DC one if so you can get a pedal like on a sewing machine to make it variable.
Mines an AC motor from a garage sale lol I definitely need a DC motor one day but I couldn’t say no to 10 bucks ha ha Eastwood has a motor set up that I would like to adopt
I have a 90VDC motor listed for sale now on Facebook in the I love beadrolling group page. Brand new motor.
Nice comedic touch there!! You guys are fun to watch and learn something along the way!!
so happy i fund ur channel. i love sheet metal fab and welding but havent don it in a few years cause my shop was robbed and i lost EVERYTHING!u just lit a fire under my ass and made me remember my passion for it.i have a few hammers and a dolly so im going to get out there and start working sheet metal again. great channel dude,i have worked with some of the best and u have a great talent and im glad to see u doing this yourself instead of making someone else rich,lol.
That was great. I really like the way you go about explaining what you are doing...makes it make more sense.
OMG, that is BEAUTIFUL. It's more of a work of art than part of a car.
I love watching all of your videos. You are very down to earth and give great explanations!
Like all of the other viewer I enjoyed your thought process and the way you presented it to your audience
“Out”is the word that gives it away. Great work great video thanks
You’re so welcome Steve! Thanks for watching
I just love your vid's and your patience is non human .
i will never do this. but i'll be damned if i dont watch every second of this video! the scales look awesome!
Thanks man ! I’m stoked you watched it thru!
Looking over the shoulder of professionals is awesome.
Glad you’re enjoying it! I’m still learning lots
Hello Karl,
I'm a fellow Canadian metal fabricator in Ontario, near Toronto. I just got home this week after major surgery. The correction that you made, and the added excerpt of Will Ferrell had me laughing out loud, and I really want to thank you for that! Excellent instructional video as well.
If you are out my way, you and your travelling partner(s) are welcome here for a high quality beef BBQ. It'll be my way of supporting your channel, and you'll get to see what's going on over here. Thanks, Dave.
Being a beginner in this You are my go to Guy for the real detail in the process you use. Mean truck by the way
Carl, have just this week discovered your channel. Had to subscribe, love your work. Retired mechanic.
Dude your an artist and clever. Combine the two and you achieve whatever you can dream up. Nice job, love the content. Mick
Those diamonds are so crisp and pillowy! Lovely stuff, as always.
Thanks! I like them when they end up puffy
You have a great natural camera presence, easy to listen to and follow keep it going, you are showing your talent well and your work is impressive to say the least
Wow man way to make my day. Thank you 🙏
You are a talented man! Thanks for sharing all your tricks!
Panels, handles, whatever. They look awesome what ever you call them!
Ha ha ha! Sometimes my brain in my mouth don’t talk to each other
Just came across your channel 4 days ago and watched many episodes already.
I met/saw many people that like to (TALK THE TALK) and a very few like you that ( WALK THE WALK) . YOU ARE NATURALLY VERY TALENTED AND GIFTED INDIVIDUAL. I have learned something new with every single episode you guys post. Kudos to camera lady and you for the great content ... keep it coming ... much respect from sunshine state.
Your look of concentration at 18:15 is absolute gold! 😂 love your videos! Thank you so much for taking the time to do these and share your knowledge. Definitely be using what i learned on my 48 flatfender jeep! Hello from Washington state!
Oh man I like finding quality content like this, where the people know their shit, present it well, and do it without a massive shop full of the latest and greatest tools or some sponsored bullshit.
Keep 'em coming!
Thanks man! Glad you enjoyed the content 👊👊👊👊
7:27 into this so far. Your explanation of your method is so awesome. Props.
Thanks man I appreciate the feedback it’s good to know that explanation is clear!
Just getting into bead rolling , using punch flare dies , I learn something every video , thanks for posting .
Not sure if i'm more impressed with the panel or the DIY roller, awesome stuff!!
Ha ha ha thank you so much man I appreciate it! I’ll be making a bead roller in a future video since there’s been so much interest
They turned out fantastic. The scales are a different twist. I’m really digging the two tone in the truck. Super cool!
Thanks! Because I’m half Japanese or try and pick up a little design keys here and there in the truck that’s where the scales came in to play
Nice. Enjoyed how you explained your way every step and detailed content.
That scale pattern is awesome. You are very skilled and creative!
Thanks man appreciate it!
It’s his attention to detail that makes him a metal craftsman.
Old school technics, not a video game…….
Well done.
Thanks RICHARD!
Super creative and a great instructor! Shout out to whomever is behind the scenes as well!
Thanks so much and it’s my wife Kristina with the camera work and editing! I’ll pass on the complement
I have not seen the scale pattern before. That’s super cool. Great video and great information. Thank you so much for sharing
Also would love to see the video on the front suspension on the same truck, keep up the great work.
I have been a fabricator professionally for over 30 years but never have I stepped into sheet metal and I truly love it. I am just going to have to get more tools and learn it. you do amazing work I was actually directed to your channel by one of my subscribers Brothers Custom Builds. I love your content I am glad to have found your channel. I'm building a 78 J10 on UA-cam and right now its a blank canvas looking for people interested to follow and direct the build with comments on my short comings. I I am at the beginning of a couple other builds also that I am just getting started on videoing. Thanks for your content its priceless.
i cant stop watching ,i found the answer i have been looking for now i have to conjure one up and prey i have your skills . thank you so much
You’re so welcome! Thanks for watching him glad you found what you’re looking for cheers!
thankyou for your time , especially on those scales , that was alot of work - WE APPRECIATE IT
I appreciate you! Thanks for watching
Makes me wish I had a bead roller. These would look amazing in my project
Thanks man they’re becoming easier to come by! I started with the super cheap off shore roller and modified it to be this one
Fantastic. You really do seem to enjoy this - thanks for showing us your mad skillz.
Very cool man, one of my favorite channels. You explain things very good !
Very informative....thankx....people should note your teaching skills
Thanks very much
Thanks Karl, I'm going to be doing some aluminum panels here for this coupe and I've never done them before. Perfect timing👍
Awesome Dan! I’m stoked and this came at a good time! I was wearing your T-shirt yesterday
@@MakeItKustom ha ha cool man! I wear yours all the time. 🤙gonna get a hammer as soon as I can afford one .
Bloody good job young man. You earned my respect outright in every step.
Best wishes from South Africa.
Thank you very much man I appreciate that!
The Wedding Crashers bit was excellent!
Ha ha yeah it was! SHe knows how to make it funny lol
I’ve only just joined your channel and maybe watched 5 videos and I’ve learnt so much already. You da man. I’m hooked.
Right on Tony welcome to the channel! Thank you very much
Just found this channel and am loving it! Keep it up! 🤙
Right on colin thanks for subscribing
17:40 that looks really close to fitting my 32 Chevy coupe 5 window. I’m really paying close attention,because when I’m ready I wanna know exactly what I’m doing. An that’s exactly what I want. I about shit my self when I initially found this channel and was this guy Carl is Sharing hot rod secrets. That’s worth it’s weight in gold. Thanks Carl!
You are the Maestro of Metal
I’m a fan of fabricating and cars and build most of my own stuff, but I’ve never bead rolled at all yet found myself enjoying this video from beginning to end! Great job man, very talented!
Awesome! I hope you give it a shot one day! Thanks for watching cheers
You make it look easy ! Great job and explanation as well .
Like all good craftsmen you make it look easier than it is, great work.
Thanks Man! With repetition and video editing lol it looks pretty easy
rewatching, still loving this instruction
Your a bad dude man ,no dumb intro that has nothing to do with what the video is about like other channels, awesome work🤘🤘
Ha ha thank you so much I’m glad that you like the videos!
Unbelievable Art Work........Just incredible......great job and I learn something form you every day. Thank You....
Awesome man I’m glad to hear that you’re learning from every video!
Man you nail it. Between your demos and explanation, you almost convince me that a dumb ass like myself could do it. Your finished results look press moulded and damn near perfect, if they're not actually perfect. Thanks for the insights.
You’re most welcome man I appreciate you! And I believe you could do it for sure! It’s easier than it looks and you just Gotta give it a try
I love stuff like this. Just pure knowledge.
Awesome man glad you like it!
Looks good . Watching you work makes me think of the skill level you will have and learnt by the time your a old man. good job keep it up.
Thanks George! There’s so much to learn in this craft I’ll be a student my whole life!
Great video! Makes me realize I need to start using my bead roller !
You give such a great and informative presentation I don’t think ive seen any videos like it.. this is forking awesome
Right on man glad to hear it!
Keep up the great videos, mean skills and talent you got there, Aloha from Hawaii.
Been watching a few of your videos and I must say your wife does a great job of the camera work. Her work let's you really see what you are explaining.
Great job. And the explanation what you have to do to start, and the correct setup for the dyes to get the look you want. If you don’t take your time and think it through how easy it would be to screw up the panel and all the hard work you just did. I’m amazed that just a few bead rolls can stiffen up the panel so quickly, now I see why you run them in floor panels for stiffness. Thanks. Later