At certain point the rock could had just simply pushed over and finished this dicking around, or as the Brits would say cocking about. It’s quite annoying to watch amateurs making something simple into something complicated.
I would install a different tip, more like a flat chisel with an inside curve and possibly a rough serration on the edge. It may not last as long as a pointed tip, but would be much faster to get the crusher up and running at capacity. The pointed tip tends to slip off too much.
I was asking myself why other companies didn't use this thing. That crusher can process a lot of rocks fast, but look like boulders get stuck way too often.
There is a reason, why most of the set ups use hooks. Unless the bit placed vertically, it is inherently unstable & can not deliver the force. It is a slow process for such angled applications.
Reading all the comments some of you have no idea how technical it is to operate a rock breaker with breaking it or flicking the spider cap of the crusher
Hey 武馨, do you have an email address at which we could contact you regarding this video? We would be interested to discuss a license to use this video if this is generally possible? (i.e. via email) :) Cheers, Felix
Better solution: Fire the load foreman at the dig site for allowing skip loaders to be loaded with oversized tailings. These boulders should not make it to the trucks until they're first broken up.
The idea is to remove the obstruction...the operator is “breaker” fixated...the first smack got it where it needed to be then he could have just knocked it down in the hole...painful to watch...
At certain point the rock could had just simply pushed over and finished this dicking around, or as the Brits would say cocking about. It’s quite annoying to watch amateurs making something simple into something complicated.
Great idea needs a good operator instead of what is possibly just the manager having a quick go of a new toy
I would install a different tip, more like a flat chisel with an inside curve and possibly a rough serration on the edge. It may not last as long as a pointed tip, but would be much faster to get the crusher up and running at capacity. The pointed tip tends to slip off too much.
I was initially thinking this too , but he probably can’t see anything and relying on someone else’s direction ? Maybe , just a thought
@@nickmeier9356 And camera with dust wiper/washer on boom
Is this the first time the operator used this piece of equipment?
like watching paint dry..
I was asking myself why other companies didn't use this thing.
That crusher can process a lot of rocks fast, but look like boulders get stuck way too often.
It look like a salesman running it trying to get them to pay for the hammer when all they need is a pick on that thing to push it down.
now there would just have to be someone who can operate the thing properly ^^ : D
They will get better with experience. Crack the nut flip the nut, quick as. Better than the old hook idea, it could only flip the nut.
Watching this was painful , is the operator on lunch ?
There is a reason, why most of the set ups use hooks. Unless the bit placed vertically, it is inherently unstable & can not deliver the force. It is a slow process for such angled applications.
It helps if you have a competent operator
The sharp point is doing them no favors.
If the hammer had a camera on it, how much time could or would save?
Ilyen béna gépkezelővel még nem találkoztam!
How does this perform with a blunt chisel instead of moil..
Better than a crude hook, but still suboptimal here regarding positional actuation.
Perhaps the operator was new?
Encore un doué !!!!
Oh boy…
The guy running that hammer is useless
I read your comment as I’m watching this video and took a sip of pop and almost spit it out laughing so hard 🤣🤣🤣👊🏽👊🏽👊🏽
Must of been a learner operator
Reading all the comments some of you have no idea how technical it is to operate a rock breaker with breaking it or flicking the spider cap of the crusher
I think that operator is paid hourly?
i wonder if this operators parents had any children that survived birth
Пока смотрел, чуть нервный срыв не получил 😡
About as efficient as the ol’ analog hook 🤷🏼♂️
You need a better operator and this will work amazingly
Need a new set up !
👍☘️
Hey 武馨, do you have an email address at which we could contact you regarding this video? We would be interested to discuss a license to use this video if this is generally possible? (i.e. via email) :) Cheers, Felix
Ba cái mũi nhọn hàng ngang là xong👍
L'operatore non mi sembra molto capace.
Haha operator belajar ini bro
Were is the HOOK?
Someone is stoned
Un poco torpe rompiendo la piedra
It took him 4 minutes to try dislodge the rock rather then break it.
Rammer hammer breaker..
操作師智商有帶加強 早早就給他撥一下就下去了 還一定要用打的 搞那麽久
Those types of hydraulic breakers/hammers always have weak lateral strength. Without straight-line impact they are less than desirable.
You have more intelligent than the rock🤯
هيه خلص مبدعا كل هل قد
What a bad operator
well there was 6 minutes of incomptence, rather than 30 seconds of work!
Better solution: Fire the load foreman at the dig site for allowing skip loaders to be loaded with oversized tailings. These boulders should not make it to the trucks until they're first broken up.
This is almost as frustrating as the hook!
The idea is to remove the obstruction...the operator is “breaker” fixated...the first smack got it where it needed to be then he could have just knocked it down in the hole...painful to watch...
เปลี่ยนคนเจาะ
Your fired.
Tem bicho ruim.
Oida! A so deppert ogschdoin! Der braucht doch des Ding bloß rübadran dann foids aloa nei!
complete failure. next time bring someone down who can operate the machine
That operator did a great job👍👍👍👏🏻👏🏻👏🏻👏🏻
Ha! Doesn't work! A rock crushing rotating jaw on an excavator arm could both retrieve and crush big rocks!
bisognerebbe mettere escavatoristi bravi non come questo
Я дал бы орден за тупость .
Ohh for Christ sake just spin it with the hammer and push it in jesus
Poor operator skills.
Cambia operatore che questo nn ce buono nulla
Бездарь! Близко к установке пускать нельзя.
This is frustrating to watch as an operator. No skill no vision
Worst operator ever seen🤦♂️🤦♂️🤦♂️
כבר אני סבל שעה3 עבוד 😬😬😡
אבן גדול גרם סבל
לילה עבוד סבל ☝בוכה זרק
долго до тупого доходило, что его надо было сдвинуть