How to Make a Chalkboard // DIY Woodworking

Поділитися
Вставка
  • Опубліковано 22 січ 2025

КОМЕНТАРІ • 30

  • @phunkissartisticcreations2316
    @phunkissartisticcreations2316 6 років тому +4

    That was a great method to use the stop blocks when drilling the keyholes. We're going to have to try that on a future project, thanks!

  • @antoniobritto5736
    @antoniobritto5736 4 роки тому +2

    Man this is so satisfying to watch!❤️ Take care man.

  • @gittens52
    @gittens52 2 роки тому

    Great job!

  • @patriciaingraldi4719
    @patriciaingraldi4719 3 роки тому

    Thank you. That was great.

  • @flyingveda
    @flyingveda 4 роки тому +1

    I would love to have woodworking tools like this. I used a handheld saw and mitre box and did one not as nicely

  • @okanepara159
    @okanepara159 6 місяців тому

    The sandpaper part was not clear to me. Did you do two coats of paint and then used sand paper or you painted using sandpaper ?

  • @glip9929
    @glip9929 3 роки тому

    If you sans and prime it after applying the chalkboard paint abs then painting it again would it work ? I ran into the same issue where you can see the wood thru the paint . And what primer would be good?

    • @andrewkarsten5268
      @andrewkarsten5268 2 роки тому

      Multi surface primer works pretty good. The guy in the paint department can usually point you in a good direction if you tell them what you’re getting it for

  • @kiiwiispice
    @kiiwiispice 4 роки тому +1

    This is sooooo totally awesome!

  • @donaldjorgensen8818
    @donaldjorgensen8818 Рік тому

    Why do use alder.

  • @angebunch7204
    @angebunch7204 3 роки тому

    What was the purpose of using the scraper for the last coat of paint? And why did you switch from spray paint to regular paint?

    • @RobertJKeller
      @RobertJKeller  3 роки тому

      If I remember correctly, the spray paint just was not covering well. I believe the instructions on the can of chalkboard paint said to use a card scraper.

  • @oopsimovedagain.school
    @oopsimovedagain.school 3 роки тому

    Thanks ! Very helpful

  • @meenghosh245
    @meenghosh245 3 роки тому +2

    Going to make for mathematics

  • @justingiovanetti
    @justingiovanetti 3 роки тому

    What about particle board? Would that work? Using the smooth side?

    • @andrewkarsten5268
      @andrewkarsten5268 2 роки тому

      I’m building my own using particle board. I think it’s going to work fine, no reason it shouldn’t

  • @kymyha
    @kymyha 5 років тому +1

    Thank you

  • @titaPas
    @titaPas 5 років тому +1

    How much did it cost to make it?
    Great job, it looks so pretty and smooth.

  • @حنانفاروقعبدالصمد
    @حنانفاروقعبدالصمد 5 років тому

    It's very beautiful

  • @madriver50
    @madriver50 3 роки тому

    you might consider using a porcelain chalkboard to upgrade the writing surface surface

  • @zoraidamorales8284
    @zoraidamorales8284 3 роки тому

    Make one for me a huge one im in Puerto Rico Isabela.

  • @stevencruz9336
    @stevencruz9336 5 років тому +3

    Oh how the turntables.

    • @mitchellw6811
      @mitchellw6811 3 роки тому +1

      Like I've been hit by Cupid's Sparrow ☺️

  • @jim1226
    @jim1226 6 років тому

    Nice! Will chalk markers work on this?

    • @RobertJKeller
      @RobertJKeller  6 років тому +1

      Hmm that's a good question. I have no idea!

  • @javierdiaz17
    @javierdiaz17 6 років тому +1

    👏👏👏👏👏👏👏👏👏👏👏👏👏👏

  • @mqrts797
    @mqrts797 4 роки тому

    ;-; nvm