The MIGHTY au. Im a old bloke. So its heart warming to see a young bloke loving the au. Ive had many falcons. And still have a couple of au wagons. May the force be with you always. Just please be careful about your id. Mate.
100% best vid you have ever made. keep up the good work and I cant wait till i buy an AU FALCON. (6 months till I'm on my L's) EDIT: 2 years later im on my L's booked for my P's and i now own an AU. Its a manual ute. It was my dads and he sold it to me.
Sick seeing you driving around that area. Learned how to drive in a very similar au on those exact roads. Great roads up here.(miinus the potholes) Ps every falcon leaks from the timing case. You can seal it again and find the same thing happening 20,000ks down the line best to just reseal it when it gets too bad
Going through abit mentally right now,I had to get rid of my car I've had for ten years which didn't help because that used to be my outlet to clear my head..just go for a drive,this was therapeutic for me and I appreciate it very much Rex,watching your videos gives me joy...thankyou 🙏🙏
I used to have an ed xr6 with the pod, pacemakers and 3” straight exhaust, this was probs about 15 years ago on my ps, this vid brought me back to my youth and I think I even had a tear in my eye. Back then everyone’s first car was a VL all the way up to the VS, Fords never got any looks, nice to see the 4L 6 straight get some love :)
Your tow rig has to be a Territory! A mighty barra powered SUV that shares legit everything with a falcon, they are also really affordable and cheap as to get parts for! you also gotta go to Jollys in Dandenong, the place is filled with AUs, and unlike Imlachs its all concrete.
The 4.0 OHC are a great engine, a real gem for those wanting a fun car on a budget but not keen of shitfighting over flogged out green tops with clowns who think they are going to make 1000hp for $2000.00
Also, regarding oil leaks, my AU appears to have a massive engine oil leak, covering the underside of the engine, however we monitor the oil levels, and it only drops a few tens of mL's at most between service, and it has done this for over 10 years now.
For the tow rig, ISUZU DMAX's (and MUX's) can be modified easily and tuned to make 200kw and 800NM of torque with an exhaust and intake mod. Plus they are also rated for 3500kg towing. But then again, so can the landcruisers, difference is the Isuzu is a bit cheaper to buy, and quite a bit cheaper to run, with about 10L/100km when towing. My cousin towed his camper trailer through an offroad track, and it averaged 11l/100km lol.
The reason prado balljoints are notorious for failing (as well as gen 3 surfs/4runners) is that the balljoint is in tension so as they wear they pull apart. Fortunately, falcons are designed differently so this is less likely but it's obviously a good idea to replace when they are as worn as that. Keep up the good work
I'm an old geeza with a white AU, on gas only. 160,000 kms. The only good thing I've done to it so far is put Falken tyres on it. Yours looks bonza! S.A.
9:10 HILARIOUS COMMENT! take it you carnts! lol the fact your out in someone else neighborhood ripping it up made me subscribe, listen to that thing. i need to get my 7 back on the road again.
Sounds boss asf. Is it worth replacing the stock steering wheel with an aftermarket one? Thinkn momo or nardi. Just want a better feel on an already 'go karty' AU. Or better stay with original?
So regarding the Toyota Prado they can do that but that's after a long time of neglecting the ball joints overall they would have to be one of the most reliable cars ever my mum has one and she has done just the normal servicing and we haven't had a problem with her she has just over 500.000 they have lasted to 1m it just comes down to looking after the car and servicing when needed and it's a Petrol suprisingly the diesel Prados last not as long as the petrols
What kind of mount do you use for your head and how tall are you? Id like to get some footage like this for my XF Falcon but thinking it might be too high to the roof.
watched rudniks video drifting the auto AU now this is recommended LMAO but def dont fukc around with balljoints get some high quality ones or youll regret it when it breaks on the road
random question. whats the go with deep dish wheels on cars that they arent legal for? what are we talking with fines and that or is it just a defect notice?
Ummm, don’t assume they are illegal. Just because the factory wheels are boring doesn’t mean different ones are illegal. Factory alloys with thick hub areas look like they have no dish, yet steel wheels, which are very durable, may appear to have much deeper dish for the same offset. I’ve done exactly this on my old EB Falcon. The wheels look waaaay more aggressive , yet are well within allowable size, width and offset.
@@bengibson3955 for vic anyway, if the car comes with steering wheel airbag and is made after ‘95, it needs to have one on any replacement/aftermarket steering wheel.
@@Sutoriku nobody has discussed steering wheels. The original comment and my response were both clearly referring to wheel rim/tyre combos. I 100% agree with your comment re steering wheels with airbags, but it’s irrelevant to this discussion.
Rex New to the channel, but l have to say that lm so happy l came across it. You're a bloody legend mate, is there any thoughts of making a video of the build, like engine parts, etc?
A world first: Falcon and Touge in the same sentence
Define bashurst g
Hahaha
It’s usually falcon and indusso
@@Thelankylarrikin Hahahah facts
Au you mean mhc chops up the touge😂💀
The MIGHTY au. Im a old bloke. So its heart warming to see a young bloke loving the au. Ive had many falcons. And still have a couple of au wagons. May the force be with you always. Just please be careful about your id. Mate.
Never show your rego
All us young fellas love the mighty AU
14:03 oh my lord, Rex that sounded amazing I 100% need this setup on my AU! 😍
100% best vid you have ever made. keep up the good work and I cant wait till i buy an AU FALCON. (6 months till I'm on my L's)
EDIT: 2 years later im on my L's booked for my P's and i now own an AU. Its a manual ute. It was my dads and he sold it to me.
Sick seeing you driving around that area. Learned how to drive in a very similar au on those exact roads. Great roads up here.(miinus the potholes)
Ps every falcon leaks from the timing case. You can seal it again and find the same thing happening 20,000ks down the line best to just reseal it when it gets too bad
Ayyyy ya not wrong 😉
Going through abit mentally right now,I had to get rid of my car I've had for ten years which didn't help because that used to be my outlet to clear my head..just go for a drive,this was therapeutic for me and I appreciate it very much Rex,watching your videos gives me joy...thankyou 🙏🙏
Usually Falcons are just straight up drone, this shit sounds so clean it's unbelievable. Good stuff brother
I used to have an ed xr6 with the pod, pacemakers and 3” straight exhaust, this was probs about 15 years ago on my ps, this vid brought me back to my youth and I think I even had a tear in my eye. Back then everyone’s first car was a VL all the way up to the VS, Fords never got any looks, nice to see the 4L 6 straight get some love :)
This is actually the best AU in Melbourne.
Your tow rig has to be a Territory! A mighty barra powered SUV that shares legit everything with a falcon, they are also really affordable and cheap as to get parts for! you also gotta go to Jollys in Dandenong, the place is filled with AUs, and unlike Imlachs its all concrete.
Love my 6 speed sequential territory. Barra sounds so good just wish it revved higher.
Jolly's prices are way higher than Imlachs though, Harvey in langwarrin still has tonnes of AU's
was so good bumping into you rex!
Good chat man! I’ll see you around sir 🤙
The 4.0 OHC are a great engine, a real gem for those wanting a fun car on a budget but not keen of shitfighting over flogged out green tops with clowns who think they are going to make 1000hp for $2000.00
sshhh.. dont let said retards figure it out
Mighty au sounds incredible
When I am having a bad dream, I put on this video and listen like it's a podcast.
Bro this video is RED HOT 🚨🚨🚓🚓
that sounds so mint, makes me want to chuck some headers and a 5 speed swap in my el fairmont
i do love a bit of intec noises.
also love the editing
i wish they had walk in and out wreckers here in sydney. they're all closed
Your yt channel is exactly what I'm looking for... it entertaining and educational
Also, regarding oil leaks, my AU appears to have a massive engine oil leak, covering the underside of the engine, however we monitor the oil levels, and it only drops a few tens of mL's at most between service, and it has done this for over 10 years now.
Mines the exact same, runs like a dream but looks like it missed the toilet by a couple seconds lol
Its the timing chain tensioner o rings, easy cheap fix
3bond is the best sealant for long term oil jointing most off shelf rtv silicone is either too soft or degrades after so many heat cycles
Hang on a minute, since when did the mighty Falcon sound like this 😍
When you get rid of all the damn restrictions!!
For the tow rig, ISUZU DMAX's (and MUX's) can be modified easily and tuned to make 200kw and 800NM of torque with an exhaust and intake mod. Plus they are also rated for 3500kg towing. But then again, so can the landcruisers, difference is the Isuzu is a bit cheaper to buy, and quite a bit cheaper to run, with about 10L/100km when towing. My cousin towed his camper trailer through an offroad track, and it averaged 11l/100km lol.
Nah get a Nissan Patrol GQ series they aren’t even that expensive most under 20k.
Na ford territory, it just makes sense being a ford
I get under 11L/100km in my fte 79 towing
I have the same au same colour, got my gearbox ready just saving to turn it manual, iv fallen in love with the au !
Auto btr plates work for the manual gearbox mate
The reason prado balljoints are notorious for failing (as well as gen 3 surfs/4runners) is that the balljoint is in tension so as they wear they pull apart. Fortunately, falcons are designed differently so this is less likely but it's obviously a good idea to replace when they are as worn as that. Keep up the good work
This made me so happy to watch ❤
Ahh yes here we are 😍😍
The AU with the pacemakers is a neck snapper that’s for sure
surely a northborders collab with the photography lmao
the sump leak isn't too bad ,its a falcon thing 90% of them leak either from the timing case or sump
Mate these intech motors bloody go hard man my series 2 au Ute has 70w 90 gear oil in the motor but she's purring like a kitten
Awesome editing man really engaging + up the AU
thats such a good sounding AU
Damn I miss my AU and that sound. So mint
more pov and touge content needed!
I agree
What ever happened to the Andrew guy with the BRZ and FC?
Best sounding au ever omg 😮
Love the sounds of aus
Great video, Can i ask what you are using for a camera?
thanks! Gopro Hero 10
I'm an old geeza with a white AU, on gas only. 160,000 kms. The only good thing I've done to it so far is put Falken tyres on it. Yours looks bonza! S.A.
DOOOOSH
DOOOOOOOOOOSH
AU Falcon ASMR
9:10 HILARIOUS COMMENT! take it you carnts! lol the fact your out in someone else neighborhood ripping it up made me subscribe, listen to that thing. i need to get my 7 back on the road again.
No joke im actually creaming right now please upload more of this
Excellent job and keep it up on your videos 10/10👍👍👍 any mods you doing Honda Civic?
AYYY my guy!!! I have been seeing those 10s ! Thanks man you’ve actually been here forever 😝
That MIGHTY AU is nuts, good job🤗
Bro that thing sounds insane💪🤙
I got all my inspiration from you bro, I got the same exhaust, I just got my 4480s and 3” cat installed yesterday
Sounds boss asf. Is it worth replacing the stock steering wheel with an aftermarket one? Thinkn momo or nardi. Just want a better feel on an already 'go karty' AU. Or better stay with original?
I prefer the after markets. I reckon you get abit more control/feel for the road. All up too your preference tho
@@ee454 that's what I needed to know. Cheers mate 👍
Impecable downshifts
Aye my guy, I go to the same wreckers to fix my lancer base haha
God the creamage level on this video 😩 loving the channel Rex ya bloody legend!
Winton skid pan at the end?
Pacemaker 4480?
What exhaust system, and is there deletes?
I want my bf to sound like this.
Sounds perfect!
The son of God is alive XOXOXOXO
love your vids man
is there a muffler or hotdog in this exhaust set-up ???
sounds awesome 👌
Damn. I thought this was more chaser content finally. 🥺
It’s an Australian chaser
u running any mufflers after the headers and do u have a high flow ?
Aussie cars got me feeling like moving
Ayye I've made my ED wagon Shoot flames while drifting,mad fun !!
Mad rexi mad as
Hey man, can we get a turbo conversion for the AU👀, I love you vids man, keep it up💯
Sounds 🔥
Fangin the falc in the nongs 😜🤙
Rex H you going to do Rear Diff Oil Change and Manual Transmission Fluid and Filter change also? Car sounds good.
better get those likes up :)
So regarding the Toyota Prado they can do that but that's after a long time of neglecting the ball joints overall they would have to be one of the most reliable cars ever my mum has one and she has done just the normal servicing and we haven't had a problem with her she has just over 500.000 they have lasted to 1m it just comes down to looking after the car and servicing when needed and it's a Petrol suprisingly the diesel Prados last not as long as the petrols
That actually sounds pretty good haha
Sounds so good
sik vid rex love the POV style!
That sounds farqn tuff 💪😆🤘 as... what's in it and what did you do to it
The images you show of the 90 series Prado is a lower ball joint failure
How much hp have you added to it?
What kind of mount do you use for your head and how tall are you? Id like to get some footage like this for my XF Falcon but thinking it might be too high to the roof.
watched rudniks video drifting the auto AU now this is recommended LMAO but def dont fukc around with balljoints get some high quality ones or youll regret it when it breaks on the road
What bracket are you running to run dual callipers?
Love it
Does sound good need a roach in my life haha
why didn't you just buy new ball joints?
❤
random question. whats the go with deep dish wheels on cars that they arent legal for? what are we talking with fines and that or is it just a defect notice?
Ummm, don’t assume they are illegal. Just because the factory wheels are boring doesn’t mean different ones are illegal. Factory alloys with thick hub areas look like they have no dish, yet steel wheels, which are very durable, may appear to have much deeper dish for the same offset. I’ve done exactly this on my old EB Falcon. The wheels look waaaay more aggressive , yet are well within allowable size, width and offset.
@@bengibson3955 for vic anyway, if the car comes with steering wheel airbag and is made after ‘95, it needs to have one on any replacement/aftermarket steering wheel.
@@Sutoriku nobody has discussed steering wheels. The original comment and my response were both clearly referring to wheel rim/tyre combos. I 100% agree with your comment re steering wheels with airbags, but it’s irrelevant to this discussion.
@@bengibson3955 mate. i’m the one who commented originally. i was referring to steering wheels. i guess i should have been more specific
@@Sutoriku lol. Let’s say 75% my bad. Many have suspected me of being a dickhead. I have just confirmed those suspicions.😳😆
Rex New to the channel, but l have to say that lm so happy l came across it. You're a bloody legend mate, is there any thoughts of making a video of the build, like engine parts, etc?
This a redback middle muff rear res?
Sounds sick as
ahah you drove past my work as we where closing i think cos the gate was still open
3:58 got me dead 💀
Thanks so much for tNice tutorials video, it helped so much!
Yeah the intech
beAUtiful Au falcon :)
Yeah bro my mate ball joint on his au got to hot and snapped and the wheel fell off and went up under the car
I need one of these how much would one clean cost now adays?
few grand
@@darcykeddell4930 next purchase after my mark 2 then haha
Depends what you want. Regular autos can get a tidy one for around 5k. Manual xr6s are getting up around 10k. Xr8s have gone 15k+
2nd hand ball joints when new cost $30 each,
I take it you don't have a hydraulic press ?
Is this the Barra motor?
you got a very long way to go before that oil leak is anywhere near massive ;)
anyone know what the yellow car at 1:26 is?
mr2
Fuck this thing sounds mint bro
I've seen 10 falcon lower balljoints break. Never an upper.
It’s funny when they pull up at the workshop and say my car feels funny and just made bad sound
wet road.. "tyres warmed up a bit now"... m888
This makes me jealous that I don't have a car anymore😭