Bishop Wand cams & Peak Solice cams are almost identical

[@marchiatoiocinque3971]

update: I replaced my 5.0 cam on bishop wand liner with this 4.0 cam. I live in Italy and the shipping took a long time because the cam is not for sale on European supplies but now I can work with it much better than before. the change improved my work. thanks

[@tattoobob.haydarhaydar745]

I need cam 4.2. Do you have any idea where I can get it?

[@graffics7665]

​@tattoobob.haydarhaydar745 the only 4.2mm cams I've seen are bishop fantom but they're hard to get- always sold out. You just gotta keep checking eventually every once in a great while they have them. For the mean time I'd try the 4.0mm peak solice cam. It's only .2mm off which is probably pretty unnoticeable.

[@Gonzito3]

Nice thanks for the info that’s really going to help out! Appreciate it!

[@Johnny-ux2bi]

Don't expect same results
Might be different cam however it won't push needles as hard as a liner , motor is very important
These are some dynamic lots of artists won't understand
Torque, volts will also have an effect

[@AlexandrosNikolakis]

I cant find them at all...do you have a source?

[@graffics7665]

Painful pleasures & ultimate tattoo supply both have them in stock

[@tattoobob.haydarhaydar745]

I need cam 4.2. Do you have any idea where I can get it?

[@graffics7665]

I see what you mean, I know 4.2mm are hard to find. Also check "bishop fantom 4.2mm cam" it'll be identical

[@cappn_ronaldo]

I want that new Peak Machine, adjustable stroke, wireless..a cool 560$

[@graffics7665]

@Captain Ron's Ink XP, I just checked that out- the Solice Pro.. It says it has an 1827 motor! That's a large motor.

[@cappn_ronaldo]

@@graffics7665 I wonder what the rpm’s are, that’s like the one thing I look at to help me kind of mentally gauge how much power

[@vapestar3705]

That's crazy cause the packer motor doesn't look much bigger then a 2607?what size comes in the packer bro?

[@graffics7665]

@@vapestar3705 the packer & liner have a 2610 brushless motor & I think the shader is a 2607.

[@vapestar3705]

@@graffics7665 awesome....time to buy a 2610 then

[@henrijslidaks7595]

Hello, ive been wanting to try out a 4.2 stroke, i curently own a 3.5 bishop V6, if i were to try and get 4.2 stroke on it could i just buy 4.2mm cam or do i need to buy a whole now 4.2 mm motor?

[@graffics7665]

I think painful pleasures sells just the 4.2mm cam/bearing stroke for the v6 if you're in the US

[@Johnny-ux2bi]

Don't expect same results
Might be different cam however it won't push need needles as hard as a liner , motor is very important
These are some dynamic lots of artists won't understand

[@marchiatoiocinque3971]

hello, I would like to try to replace the 5mm cam of my bishop liner with this 4mm cam…could it work? anyone know anything?

[@graffics7665]

@marchiatoiocinque3971 Yes, these peak cams fit perfect in the bishop wands. Just switch the bishop push bar with the 4mm peak cam bar.

[@tattoobob.haydarhaydar745]

I need cam 4.2. Do you have any idea where I can get it?

[@tattoobob.haydarhaydar745]

for bishop packer plz

[@graffics7665]

@tattoobob.haydarhaydar745 it is a bishop wand packer I have in the video just switching cams. Nice work BTW (on your channel)

[@brian1291]

Hmmm, I might have to try that. How do you switch out the push bar?

[@graffics7665]

The push bars are also held by grub screws. It's pretty easy to switch them.

[@brian1291]

@@graffics7665 oh hell yea bro! Thank you! I found another video on it as well. You both saved me a shit ton of money lol. I was literally about to pay for packer just to get a 4.2 stroke 🤣

[@sushinktattoo1366]

One is brass and the other is steel counterweight. Bishops is slightly better. Not enough to notice of corse

[@INKtherapy406]

These minor differences absolutely do have an impact though.

[@Psil0]

I'm looking for a 5mm stroke cam I could use...any idea?

[@graffics7665]

Hey sorry for the late reply.. i checked & cant find any 5mm cams but will let you know if I do.

[@graffics7665]

@Psil0 Hey I was just talking to Captain Ron about the Ambition Torped machine he got so i was looking at them on Amazon & they come with a 4.0, 4.5 & 5.0mm cams for $70. Not too bad for all three cams. Nice looking machine also.

[@TheVIRUS1983]

Is the peak cam hole 2mm?

[@user-mr6xw6wh4t]

It's 1.5 mm

[@user-mr6xw6wh4t]

Inkjecta uses cams with a 2mm hole.
Cheyenne 1.5 mm, Fk irons 1.5 mm( FLUX ,EXO,FLUX MAX, ONE), Bishop 1.5 mm, Ez 1.5 mm and ambition and most of dragonhawk only on the brushed motor models 1.5 mm.
You can get the Bishop fantom cams in 3.5 mm stroke and 4.2 mm stroke.