There is an in App store BLE Scanner which has an option to broadcast as advertiser. Can I use this broadcaster as well to trigger the esp32 to do some action since it seems to broadcast as a BLE device.
Mine is not working. The BLE address of keychain is displayed on the serial monitor but it is not comparing with the if condition. Can you please help me?
ere's no other way to describe the amazing things you teach us and how dinamic and professional you always do your videos, once again, thanks a lot for your great shared knowledge. BTW I tried to open the link for the code and connections but it's not working anymore, do you have another link you can please share? thanks.
great video, i need help, iam using ble proximity in esp 32 to trigger my light bulb in my living room the problem is my living room is little big so when im in corner of the room esp does not catch the ble signal from my smart watch so im thinking of using another esp32 module to create mesh network to extend signal to cover every corner inside my room. thank you.
Hi, i hav a question. .Can i use my android phone insteas of esp32 keychain .If yes im sure i shud install app on my phone which i did (beacon simulator) But failed as the simulator ble address keeps changing every time i reset the app..
Hi, I faced some problems during building this project. My Bluetooth collar works on classic BT, not on BLE.and earpods and watches works on BLE so what could do for this because some of the devices can have classic BT and some of have BLE. or if I want to do with Classic BT is there any resources because I didn't find anything till now.... Pls help.
@@techiesms @techiesms i think all devices u had used are BLE. Can we active the lock from Bluetooth classic also? (like old bluetooth earphones/bluetooth 3.0 module(www.amazon.in/dp/B08SSRTDQV/ref=cm_sw_r_cp_apa_glt_i_FRQ2AEB814MYF93EMF69)
Hi techiesms, this was the project I was looking for. When I follow the link in the description, on your page, Connection Diagram images are not visible. Can you please help?
I have a heater which can be controlled from a supplied BLE RC. Is there a way to duplicate the BLE RC with a BLE Hub which then can be connected with/comtrrol from Home Assistant? Thanks.
Hi sir I wanted to buy your ESP Cam Shield? Can I know its cost and how can I buy it? It not there in the pcb list in the glitch merchandise. Kindly Reply Thank You
Awesome video....I did similar project by connecting my MI band haha....also bro...can you try showing how to connect more than 2 BLE beacons to an ESP32 and transmit data from them? Can we do it?
Bro this pop up notification cannot be implemented as Google itself has stopped support for the Eddy stone beacon and nearby share.. so it's difficult to implement this type.. it'll be helpful if you can implement this type of eddystone url broadcasting beacon..
hi can anyone help me with the code. i have esp32 devkit v1 and a bluetooth tag (A)...... the code in this video turnoff led after 5 secs, dosent act like watchdog, it needs some changes in coding that am not aware of. what i want is - the esp32 should act as a watch dog , if it found this bluetooth tag (A) around it then turn on built in led , and keep the led on UNTILL the bluetooth singnal on the tag (A) are lost , as soon as the bluetooth tag (A) signal is lost , the led should turn OFF.
I had replicated the project and just added only 4 5 lines for blynk platform , but it is showing sketch too big(106%). I had tried reducing variables already present too. Could you please help me?
no BLE and internet both are different And bro, this is the era where everyone is using bluetooth based smart watch, earphones, smart bands, etc. so there are major chances that bluetooth on the device is turned on
@@techiesms Thanks for the reply. I tried this project with smart phone and beacon simulator app, but the problem is the BLE address is changed every time after turning off the simulation, when I turned on the simulation again the device assign a new BLE address, and the ESP32 can't recognize it. How to resolve this problem....please help. I want to use smartphone as transmitter not any other device . Looking forward to you ! Thanks in advance.
Hello Techiesms. I have an idea with this BLE beacon unlock. Can we use it to make a Motorbike automatic engine lock and automatic engine unlock? Once you move close to your bike, the engine gets activated and you only need to kick-start the bike, no ignition keys required. And as you stop and stop the engine with a hidden push button, moving away from the bike locks the engine from starting up even if you kickstart the bike a thousand times. Another idea is the BLE beacon, starting your bike engines automatically as you move close. Ideal for bikes with Kickstarter motors. Just jump on the already start bike and ride on. This is to prevent bike theft or hijacking. If the bike is stolen or hijacked, the engine goes off when it moves out of the range of the BLE that's in the bike owners pocket, so the hijacker won't be able to go away with the hijacked or stolen bike. What do you think?
MAC address is visible easily..... what if someone know your mac address and feed that into his esp32 (set your mac address as his esp32 mac address) and unlock your bike ? Do you have any suggestions? For that
Finally opened the door without airpods.. I can now afford Smart key chain 😁😁 superb 👌👌👌 Now I understand how they used the smart key for Renault Triber car. And Can we reduce the size of the key chain, Inside of esp32, is there any alternative Bluetooth emittors?
Tried the code, it didn't work in 2 ways. First, the relay connected to GPIO2 is always on. Second biggest issue is that iPhone and other iOS devices do not broadcast the BLE Address publicly because of security reasons. So it can only work with the custom made BLE transmitter but not with iOS devices :( I hope there can be a solution for that in the code level maybe via UUID or some other constant and implementing this into the code.
Interesting project, what if you don't want to use the press switch keychain? So when the key chain gets close it triggers. Also would be nice to see an NFC option. Thanks for sharing.
Why not trying to get this project on next level Can you make something like this using same technology or anything else which will send a whatsapp message whenever someone visits your office saying: *"Welcome to TechieSMS Studio"*
Not sure for WhatsApp But I think it’s possible for telegram No wait We can’t As we won’t be knowing their telegram I’d So how people use this beacon for broadcasting msg or notifications is we need to have our own made mobile app and then only we can send such notifications Are you getting my point,?
@@techiesms Yes definitely I'm getting your point but in the starting of this video you told the practical life use of this technology. That if someone passes by a shop he will get a notification ? The question is we didn't know their number neither their any contact information. Then how it's the practical life use is being used in the world ?
Every shopping mall or brand has their own application which we can download on our phone and using that application we will be getting those pop ups when we pass by the same shop whose app we have For example if I have app of Croma, so whenever I pass by croma store I can get the pop up
@@techiesms That's true... But this restricts the use of this technology to big industries only. Those who can afford to develop apps and are popular. Small organization will not be able to do that. I was thinking if RFID can do this ? Tapping our tags and getting a notification ? But the question remains the same... How will the message come in the phone in any way.
Can one implement a coincell based BLE device which will vibrate as soon as my smartphone is away by a certain distance from me. The application is to ensure I don't forget/loose my smartphone
Your Code is wrong. You use a global variable device_found. So as soon as you have many devices, and your beacon Receiver finds your device It is Not Important which device is in rage (above rssi -50), so also another device will Open your Door... Test your Code!
@@techiesms Hi, sorry nur you didn't die that. Your device finds all beacons in the area - let us make an example - ist finds 3 devices. Your device is dar away (at Home) nur ist connected to beacon Receiver and has rssi value of -90. A foreign Device e.g. my beacon is near your Door. Because your beacon is connected, the global variable "device_found" is Set to true. In Main Loop you Check If any found device has rssi value more than -50 If device_found is true... Well and my beacon is Close and so the If condition is true. I would Open your Door even If your beacon has a Bad Connection to Receiver. So No Idea how you checked this...
if the project doesn't work, try changing ESP32 boards package version to 1.0.2
Link not available
Dam over here in Karachi, this lock pick works everytime 😂😂😂😂😂😂
Might as well just make a BLE spammer😂
@@Devel0_pers beacon
do you have the code
We thought it was april fool😆but it got real ,got to learn something new👌thankyou so much..
Thank god now people started believing
Now go ahead and share it with the community 😇
Hello from Ukraine. Thank you for your great videos!
You Sir, are a brilliant man! I loved the video and I'm going to use it to open up my garage door when I get close. Keep up the excellent work!
Thank you 😊
Happy making 😇
hey please share the code
That's amazing as well as informative!
hey please share the code
Someone from my friendlist share this video.and i got to know this is so much usefull ...u got a new subscribee🎉🎉
Welcome to techiesms UA-cam channel
Explore our channel to see more such unique and intros projects
Hope you’ll learn something new from every video
how to download (Digikeyboard.h) library please help😭😭😭
Can you please make a dedicated video to send notification when person passing through shop
Good info👍Love your videos!💪
Glad you like them!
how to download (Digikeyboard.h) library please help😭😭😭
beacon advertisements do not work anymore
Great work same as great scott vids
Thanks 👍
hey please share the code
Very cool! I think can also make a car that following me based on the beacon?
There is an in App store BLE Scanner which has an option to broadcast as advertiser. Can I use this broadcaster as well to trigger the esp32 to do some action since it seems to broadcast as a BLE device.
i could not get the sketch to work. Saw your comment on the boards package, and now it works. I wonder what they changed.
Mine is not working. The BLE address of keychain is displayed on the serial monitor but it is not comparing with the if condition. Can you please help me?
ere's no other way to describe the amazing things you teach us and how dinamic and professional you always do your videos, once again, thanks a lot for your great shared knowledge. BTW I tried to open the link for the code and connections but it's not working anymore, do you have another link you can please share? thanks.
hey please share the code
Where was i for so long ..thanx to my friend for sharing and thanx to u for creating this great project.keep it up,😀😀
Share it with others to share knowledge
how to download (Digikeyboard.h) library please help😭😭😭
hey please share the code
Great!. can i use any other small boards instead of esp32
Can the code be updated to use UUID instead of BLE address? How would you do that?
it"s not working there is a problem ,the ble address is changing after some time so when get new address the esp32 is not identify the ble address
great job... I seems cannot detect my mobile bluetooth mac. and I even tried to install ble simulator also cannot... What is the problem?
Very well explained Video 👍🏻
hey please share the code
Wow that's awesome Soni
Thank you 😊
i am useing BLE library for esp32 but it showing name in NRF app in IOS but not showing in IOS Bluetooth setting pleace help me.
Source code isnt available?!
How can i download the code ?
great video, i need help, iam using ble proximity in esp 32 to trigger my light bulb in my living room the problem is my living room is little big so when im in corner of the room esp does not catch the ble signal from my smart watch so im thinking of using another esp32 module to create mesh network to extend signal to cover every corner inside my room. thank you.
So it can be spoffed with mac adres cloning. Maybe adding some message generated key
Hi, i hav a question.
.Can i use my android phone insteas of esp32 keychain
.If yes im sure i shud install app on my phone which i did (beacon simulator)
But failed as the simulator ble address keeps changing every time i reset the app..
Hi..can we run door lock system on 12v 3Ah battery? How much long will it run on full charge?
Can it be done using HC-05 ? To minimize the size of the keychain.
No
HC05 is Bluetooth not BLE. and Bluetooth requires pairing
Totally new concept 😀 Thanks for the video
😇✌🏻
hey please share the code
Great video bro 😎😎
Thanks man
Woww this is awesome 😎😎
What library package name you downloaded?
hi is the source code still available?
i am looking for it too??
Hi, I faced some problems during building this project. My Bluetooth collar works on classic BT, not on BLE.and earpods and watches works on BLE so what could do for this because some of the devices can have classic BT and some of have BLE. or if I want to do with Classic BT is there any resources because I didn't find anything till now.... Pls help.
Hello sir I need to know how to find out rssi value for the beacon Thai I have ?? Is it similar to this ??
What version of board manager for esp32 did you use? Your code to my arduino IDE seems to have a problem.
I can't detect my BLE beacon on my BLE scanner app. Helpppppp. I have already changed the board version to 1.0.2
🤩🤩🤩
This was exciting
🙌🏻🙌🏻
Can we use HTC FETCH key beacon or mi smart band instead of DIY keychain?
Yes
@@techiesms @techiesms i think all devices u had used are BLE. Can we active the lock from Bluetooth classic also? (like old bluetooth earphones/bluetooth 3.0 module(www.amazon.in/dp/B08SSRTDQV/ref=cm_sw_r_cp_apa_glt_i_FRQ2AEB814MYF93EMF69)
Hi techiesms, this was the project I was looking for. When I follow the link in the description, on your page, Connection Diagram images are not visible. Can you please help?
Nice video bro ❤️🔥🔥
If i'musing android for BLE like in youre video, can it??
Can I use other tws?
Tws???
@@techiesms he meant truly wireless earbuds
@@techiesms truly wireless earphones
Hi what about the locking?
When it will lock automatically?
I have a heater which can be controlled from a supplied BLE RC. Is there a way to duplicate the BLE RC with a BLE Hub which then can be connected with/comtrrol from Home Assistant? Thanks.
Super bro 😎😎😎
Hi sir I wanted to buy your ESP Cam Shield? Can I know its cost and how can I buy it? It not there in the pcb list in the glitch merchandise.
Kindly Reply
Thank You
Awesome video....I did similar project by connecting my MI band haha....also bro...can you try showing how to connect more than 2 BLE beacons to an ESP32 and transmit data from them? Can we do it?
hey please share the code
Damn I wish it was April fool I would have got free Airpods if you remember 😂 looks like I am not getting my free Airpods
Good Video as always 👍🏼
I remember
Now you have to share it with your 10 friends
@@techiesms sure
Can we use node mcu
create a keyless project pack for the vehicle maybe it's better,tanks
Sir but in first example you have given in which the person phone need to turn on BT for receiving notifications or not?
Yes
Bluetooth should be on
But the beauty of BLE is they don’t need to get paired
@@techiesms ok it's really good 👍✌️
how to download (Digikeyboard.h) library please help😭😭😭
1st comment
I'm facing the issue.
As beacon is in the range also relay not operating.even rssi of available ble beacons also not printing on the serial monitor
What is maximum range that i can put as rssi_threshold?
Code link? the provided one does not work
Not showing other deives mac address in ardunio monitor ....?...or mobile ,,,how setup sir any code error..Pls tel me sir
Bro this pop up notification cannot be implemented as Google itself has stopped support for the Eddy stone beacon and nearby share.. so it's difficult to implement this type.. it'll be helpful if you can implement this type of eddystone url broadcasting beacon..
Not work Apple devices is random MAC address ?
hi can anyone help me with the code.
i have esp32 devkit v1 and a bluetooth tag (A)......
the code in this video turnoff led after 5 secs, dosent act like watchdog, it needs some changes in coding that am not aware of.
what i want is - the esp32 should act as a watch dog , if it found this bluetooth tag (A) around it then turn on built in led , and keep the led on UNTILL the bluetooth singnal on the tag (A) are lost , as soon as the bluetooth tag (A) signal is lost , the led should turn OFF.
I had replicated the project and just added only 4 5 lines for blynk platform , but it is showing sketch too big(106%). I had tried reducing variables already present too. Could you please help me?
during uploading the sketch (Arduino IDE)go to tools and increase tha flash size of esp32
Can you give me configurations codes in word format?
Your not going to get anything from here
Can this beacon internet based because who are going through the shop they don't always on the ble but there is a chance of data is turned on
no
BLE and internet both are different
And bro, this is the era where everyone is using bluetooth based smart watch, earphones, smart bands, etc. so there are major chances that bluetooth on the device is turned on
@@techiesms ya. That's write thanks for helping
Sir....can you help me...fix this error....
( class ITag : public BLENotifier { ) expected class-name before '{' token.....
Thanks.....
can we use esp32 to scan for beacons and send the RSSI to my nodered server over wifi ?
Yes
@@techiesms I m able to scan beacons but as soon as I use the add the wifi library and functions it throws an error your saying sketch is too big
How solusion randomize address iphone?
hello how to download ble libraries plz help me
my idea-
when I come from market to home, sanitize my hands
also, when I come near car open the door and when I exit, close it.
Provided code link is not working!
Bro you belongs to which branch of engineering ❤️❤️❤️❤️❤️❤️
Electronics and Communication
@@techiesms thanks for the reply bro
how to download (Digikeyboard.h) library please help😭😭😭
Instead of key chain, can I use my smartphone as sender?
Yes
@@techiesms Thanks for the reply. I tried this project with smart phone and beacon simulator app, but the problem is the BLE address is changed every time after turning off the simulation, when I turned on the simulation again the device assign a new BLE address, and the ESP32 can't recognize it. How to resolve this problem....please help. I want to use smartphone as transmitter not any other device . Looking forward to you ! Thanks in advance.
Now u just need a 3d printed case for enclosing you key
exactly
I copied and pasted all the code changing the device addresses to esp32 but on the serial monitor is dsiplay only "scanning..." where im wrong
really interested in making one but could find pcb gaber file
Have been a subscriber and watching all your videos since an year , amazing .Brother where can I get the Gerber file for ordering this pcb ?
Can a 8th standard student can do this project
Hello Techiesms. I have an idea with this BLE beacon unlock. Can we use it to make a Motorbike automatic engine lock and automatic engine unlock?
Once you move close to your bike, the engine gets activated and you only need to kick-start the bike, no ignition keys required. And as you stop and stop the engine with a hidden push button, moving away from the bike locks the engine from starting up even if you kickstart the bike a thousand times.
Another idea is the BLE beacon, starting your bike engines automatically as you move close. Ideal for bikes with Kickstarter motors. Just jump on the already start bike and ride on.
This is to prevent bike theft or hijacking. If the bike is stolen or hijacked, the engine goes off when it moves out of the range of the BLE that's in the bike owners pocket, so the hijacker won't be able to go away with the hijacked or stolen bike.
What do you think?
MAC address is visible easily..... what if someone know your mac address and feed that into his esp32 (set your mac address as his esp32 mac address) and unlock your bike ? Do you have any suggestions? For that
Similar projects already exist, especially in cars
Finally opened the door without airpods.. I can now afford Smart key chain 😁😁 superb 👌👌👌
Now I understand how they used the smart key for Renault Triber car.
And
Can we reduce the size of the key chain, Inside of esp32, is there any alternative Bluetooth emittors?
bro if any power failure occurs how can i open door?
Tried the code, it didn't work in 2 ways. First, the relay connected to GPIO2 is always on. Second biggest issue is that iPhone and other iOS devices do not broadcast the BLE Address publicly because of security reasons. So it can only work with the custom made BLE transmitter but not with iOS devices :( I hope there can be a solution for that in the code level maybe via UUID or some other constant and implementing this into the code.
sys/time.h no such file or directory showing .pls inform where the error is .IMHAD TAKEN FILE FROM YOUR IBEACON RESPOSITORY
The adress of my air pode changes each time i open the airpode what to do can i get a static adress for airpord
Make with Arduino and HC05
I cant get the code and ckt dgm
Website not working 😢😢
open the door with screwdriver :)
How to set static IP address in esp32
hey, please share the code
Please give code
How to get beacon chains in India?
I don't know if it's available
but your smart watch and smart bands are also beacons so use that
Interesting project, what if you don't want to use the press switch keychain? So when the key chain gets close it triggers.
Also would be nice to see an NFC option.
Thanks for sharing.
FYI : your website is down. getting error This site can’t be reached .In domain
Why not trying to get this project on next level
Can you make something like this using same technology or anything else which will send a whatsapp message whenever someone visits your office saying:
*"Welcome to TechieSMS Studio"*
Not sure for WhatsApp
But I think it’s possible for telegram
No wait
We can’t
As we won’t be knowing their telegram I’d
So how people use this beacon for broadcasting msg or notifications is we need to have our own made mobile app and then only we can send such notifications
Are you getting my point,?
@@techiesms
Yes definitely I'm getting your point but in the starting of this video you told the practical life use of this technology. That if someone passes by a shop he will get a notification ? The question is we didn't know their number neither their any contact information. Then how it's the practical life use is being used in the world ?
Every shopping mall or brand has their own application which we can download on our phone and using that application we will be getting those pop ups when we pass by the same shop whose app we have
For example if I have app of Croma, so whenever I pass by croma store I can get the pop up
@@techiesms
That's true... But this restricts the use of this technology to big industries only. Those who can afford to develop apps and are popular. Small organization will not be able to do that. I was thinking if RFID can do this ? Tapping our tags and getting a notification ? But the question remains the same... How will the message come in the phone in any way.
Hindi ne video banaow.sir plzzx
Can one implement a coincell based BLE device which will vibrate as soon as my smartphone is away by a certain distance from me. The application is to ensure I don't forget/loose my smartphone
Soorry bro but😂
Anyone can open your door with. The help of screw driver easily
This is just a concept you can say.
For practical purposes, this lock is not even that strong anyone can easily break it as well
Your Code is wrong. You use a global variable device_found. So as soon as you have many devices, and your beacon Receiver finds your device It is Not Important which device is in rage (above rssi -50), so also another device will Open your Door... Test your Code!
I have programmed for opening the door whenever any KNOWN device is in range
And I have tested that
@@techiesms Hi, sorry nur you didn't die that. Your device finds all beacons in the area - let us make an example - ist finds 3 devices. Your device is dar away (at Home) nur ist connected to beacon Receiver and has rssi value of -90. A foreign Device e.g. my beacon is near your Door. Because your beacon is connected, the global variable "device_found" is Set to true. In Main Loop you Check If any found device has rssi value more than -50 If device_found is true... Well and my beacon is Close and so the If condition is true. I would Open your Door even If your beacon has a Bad Connection to Receiver. So No Idea how you checked this...
Sorry autocorrect to German... I Hope you can understand what i wrote...
RSSI mac adress not showing in ardunio monitor
same here..
You need to downgrade esp32 board packages then it will work
@@techiesms what version did you use.?
mine isn't showing rssi either
@@techiesms which version do i need?
😀