I know nothing about mining but I knew I was going to like this video right at the beginning when you explained how prepared you were. Great times thanks for sharing this.
Careful and read the same side of the scale on your clinometer each time , because they are often built with degrees on one side and percent slope on the other . This tends to happen most often in the absolute WORST stretch of miserable passageway , hours from the closest entrance , when everybody is pretty much over the project , and , nobody wants to bother with doing back sights on each station , so it isn't caught immediately . Been there , done that , left the T-shirt with instructions on where to place it ...
I had the unfortunate encounter with a Mohave green the other night just as I was about to climb my ladder down into the mine. As I opened the trap door I have over my ladder way I heard that distinctive shhhhhhhhhhh and I KNEW there was a rattler not too far down there somewhere so I turned my helmet light on high intensity so I could possibly see where he was. It didn’t sound like he was around where my trapdoor is nor where my first and second ladder or even third ladder down was. So I ended up inching my way down with a machete then about the fifth ladder down which is about 50 or so feet (I make my ladders 10 feet max so I can handle them when putting them in by myself) and there he was wrapped around one of the side rungs. Luckily I was able to hear that rattle from how far down he was. I would’ve gotten hit QUICKLIKE! 😮 However a couple of days before that I was out doing stuff out around the outside of my mine and when I went into the mine to grab a break and hit up on some water I seen my dog standing there over the mine shaft boards that I have the shaft covered with and his paw bleeding like hell and just looking nasty. I suspect he was snake bit but luckily I had my dog vaccines for snakebites not long ago and I think that’s what saved his life. He still has a good size area of skin that looks like it was eaten away but the last couple days he’s been up and walking on it and eating and drinking plenty of water so it looks like he just may be ok. I don’t think the snake(if it was) give my dog a full dose of venom ORRR my dog kicked his leg back from the snake to where it ripped the skin but wasn’t able to give him a decent venom dose…..(thankfully). Dawna
I'm so happy to hear your dog is ok Dawna. I was be lowered down a vertical mine that I own, when at the 70' level, just before I was ready to step off, there was a rattle snake. I was hanging by rope and had to use our snake grabbers to get it. We've had a number of encounters. They are so hard to see underground. I had 4 in one of my mines and Harry had 4 as well. Keep a careful eye out and be safe out there!
@@mineoperator u too! We really need ur channel! You guys do the real deal and that’s respected. I’ll say why. I have nothing at all against mine explorers but the ones that say their miners don’t hit me too well because they don’t do actual mining, just exploring. Whereas I know you guys also do exploring but you also do actual mining which is a complete different perspective on mine exploring. And thanks about my dog. He was up and walking on it quite a bit today. He’s drinking lots of water and eating and the bite looks reddish like it could be in the heal process.
For my money I like the surface sample A LOT! Why, a fella could save on all the expensive climbing gear, oxygen sensor, severe masks, etc, plus the danger and discomfort and just work the surface vein out in the comfort of a desert evening and pull .25-.5 oz. a day with a truck-back crusher and recirculating sluice box.
You guys are turning out some nice video's the editing is pretty decent for a UA-cam channel. Don't forget about BC to your North there are lots of Prime area's to prospect many of which have never been looked over. We don't worry about rattle snakes here just Bears and Mountain lions.
Hey MineOperator...any chance you might consider touching base with Matt Carriker down in TX; hes got a cave he is excavating, and I think they could really REALLY use some help to go further safely. I know you and Jason are staying busy, but perhaps theres a few minutes to discuss with him how to find someone in his area who can do the job.... You guys ROCK , in so many great ways!
The second, easy-accessible sample looks very promising 💛✨ The mine itself looks unsafe, though. Maybe it's because of the deteriorating woodwork. How much profit did the (former) owner haul out of this mine considering these gigantic piles of waste?
Hi Brent! Same here. We're working on it. As soon as I finish fabricating the clarifying tank and we add our centrifuge into our circuit. Now with the summer heat, most of our guys won't work in it. So there's a few challenges we're juggling. Thanks for your comment!
That would be the following compass: www.amazon.com/Sportneer-Lightweight-Inclinometer-Waterproof-Backpacking/dp/B081R5ST38?crid=IZ5BY3XA0K6G&dib=eyJ2IjoiMSJ9.eg49PqOHS2zux4MqoerzfeoTCw45ds4Q3Jya6bBqb23PmAOTwC-vvm-LOT5n7AZTSW4i6y1BfVvzEGGYJ5_cRKMP_fTq8Brio2hJb-Im8b207NG63qMq81HRE_oL1HyM1dPlnPoEji9wt_kq56q0qWj-BkN7Jd_xIkHe4jJd6rnNkm0dFvrjR2EMoumdilRIuBIS9WjIILe2xPXPmYLdx4E9qZsH0wE0kXryszEiLYR2KJa6sNPVAJ4Auc4RpkgH7NI5W_-cRa07ADJYQ-ToEodUwrHmLAPE-yhQ4oUrAls.9ASp8QXU9yMRPK-3lWN85JFr18vByITaUJir2c_ea-k&dib_tag=se&keywords=Sportneer+Compass&qid=1717790286&sprefix=sportneer+compa,aps,172&sr=8-10&linkCode=sl1&tag=mineoperator-20&linkId=d41052692a129c5264e983927c03ed62&language=en_US&ref_=as_li_ss_tl
The jaw crusher was down for a few months. We got it operating again but had issues running volume, especially without heavy equipment. The solution, the clarifying tank helps us salvage water and handle our tailings and silts way better than before. 1 ton is easy, but 4-10 tons is a different beast. We are back out there again and will report in soon! Their fixes are still going strong. Our season just started.
I know nothing about mining but I knew I was going to like this video right at the beginning when you explained how prepared you were. Great times thanks for sharing this.
Great times indeed fam. Keep on having fun and living the dream. Gold Squad Out 🤠
I'm loving these adventures. I just wish they were longer! Thanks for all the hard work!
We'll work on that 😉
Thanks for taking me along
Careful and read the same side of the scale on your clinometer each time , because they are often built with degrees on one side and percent slope on the other . This tends to happen most often in the absolute WORST stretch of miserable passageway , hours from the closest entrance , when everybody is pretty much over the project , and , nobody wants to bother with doing back sights on each station , so it isn't caught immediately .
Been there , done that , left the T-shirt with instructions on where to place it ...
That's a much better idea to test the drill cuttings versus hauling out bulky heavy samples in a backpack. Nice work Chad.
That second pan looks pretty good.Glad you didn't find any rattle snakes.
Same here! I really want to go back and explore that mine underground. Gonna bring a team with me and do it safely.
@@mineoperator count me in
I had the unfortunate encounter with a Mohave green the other night just as I was about to climb my ladder down into the mine. As I opened the trap door I have over my ladder way I heard that distinctive shhhhhhhhhhh and I KNEW there was a rattler not too far down there somewhere so I turned my helmet light on high intensity so I could possibly see where he was. It didn’t sound like he was around where my trapdoor is nor where my first and second ladder or even third ladder down was. So I ended up inching my way down with a machete then about the fifth ladder down which is about 50 or so feet (I make my ladders 10 feet max so I can handle them when putting them in by myself) and there he was wrapped around one of the side rungs. Luckily I was able to hear that rattle from how far down he was. I would’ve gotten hit QUICKLIKE! 😮
However a couple of days before that I was out doing stuff out around the outside of my mine and when I went into the mine to grab a break and hit up on some water I seen my dog standing there over the mine shaft boards that I have the shaft covered with and his paw bleeding like hell and just looking nasty. I suspect he was snake bit but luckily I had my dog vaccines for snakebites not long ago and I think that’s what saved his life. He still has a good size area of skin that looks like it was eaten away but the last couple days he’s been up and walking on it and eating and drinking plenty of water so it looks like he just may be ok. I don’t think the snake(if it was) give my dog a full dose of venom ORRR my dog kicked his leg back from the snake to where it ripped the skin but wasn’t able to give him a decent venom dose…..(thankfully).
Dawna
I'm so happy to hear your dog is ok Dawna. I was be lowered down a vertical mine that I own, when at the 70' level, just before I was ready to step off, there was a rattle snake. I was hanging by rope and had to use our snake grabbers to get it. We've had a number of encounters. They are so hard to see underground. I had 4 in one of my mines and Harry had 4 as well. Keep a careful eye out and be safe out there!
@@mineoperator u too! We really need ur channel! You guys do the real deal and that’s respected. I’ll say why. I have nothing at all against mine explorers but the ones that say their miners don’t hit me too well because they don’t do actual mining, just exploring. Whereas I know you guys also do exploring but you also do actual mining which is a complete different perspective on mine exploring.
And thanks about my dog. He was up and walking on it quite a bit today. He’s drinking lots of water and eating and the bite looks reddish like it could be in the heal process.
Sample, Sample, Sample.... keep it happening guys! ⚒️⛏️💪👍🤠
Will do Donald. Thank you.
Where is your Dolly Pot to smash the whole sample. This result from such a small sample explains the size of the waste rock pile!
Pretttyy nice sample there!
For my money I like the surface sample A LOT! Why, a fella could save on all the expensive climbing gear, oxygen sensor, severe masks, etc, plus the danger and discomfort and just work the surface vein out in the comfort of a desert evening and pull .25-.5 oz. a day with a truck-back crusher and recirculating sluice box.
Looking forward to the next video.
You guys are turning out some nice video's the editing is pretty decent for a UA-cam channel. Don't forget about BC to your North there are lots of Prime area's to prospect many of which have never been looked over. We don't worry about rattle snakes here just Bears and Mountain lions.
I would get a larger sample the second pan kind of dictates that good work thanks for the video
Hey MineOperator...any chance you might consider touching base with Matt Carriker down in TX; hes got a cave he is excavating, and I think they could really REALLY use some help to go further safely.
I know you and Jason are staying busy, but perhaps theres a few minutes to discuss with him how to find someone in his area who can do the job....
You guys ROCK , in so many great ways!
Email me at info@mineoperator.com.
Ps...to overcome the GoPros lack of closeup, try a large sized magnifying glass. Ive had good luck shooting stills that way with my phone...
Now that's a great idea. I'll order one asap and try it out. Thanks for sharing.
Good video
The second, easy-accessible sample looks very promising 💛✨
The mine itself looks unsafe, though. Maybe it's because of the deteriorating woodwork.
How much profit did the (former) owner haul out of this mine considering these gigantic piles of waste?
That "barbless wire" is known as "railroad wire".
U had us worried 4 u! SNAKES!
Spooky looking area
I enjoy prospecting and spelunking as much as the next guy, but I sure would like to see some tonnage processed!
Hi Brent! Same here. We're working on it. As soon as I finish fabricating the clarifying tank and we add our centrifuge into our circuit. Now with the summer heat, most of our guys won't work in it. So there's a few challenges we're juggling. Thanks for your comment!
Can you share a link to that tool you use to check the degrees on the strike?
www.amazon.com/Sportneer-Lightweight-Inclinometer-Waterproof-Backpacking/dp/B081R5ST38?crid=IZ5BY3XA0K6G&dib=eyJ2IjoiMSJ9.eg49PqOHS2zux4MqoerzfeoTCw45ds4Q3Jya6bBqb23PmAOTwC-vvm-LOT5n7AZTSW4i6y1BfVvzEGGYJ5_cRKMP_fTq8Brio2hJb-Im8b207NG63qMq81HRE_oL1HyM1dPlnPoEji9wt_kq56q0qWj-BkN7Jd_xIkHe4jJd6rnNkm0dFvrjR2EMoumdilRIuBIS9WjIILe2xPXPmYLdx4E9qZsH0wE0kXryszEiLYR2KJa6sNPVAJ4Auc4RpkgH7NI5W_-cRa07ADJYQ-ToEodUwrHmLAPE-yhQ4oUrAls.9ASp8QXU9yMRPK-3lWN85JFr18vByITaUJir2c_ea-k&dib_tag=se&keywords=Sportneer+Compass&qid=1717790286&sprefix=sportneer+compa%2Caps%2C172&sr=8-10&linkCode=sl1&tag=mineoperator-20&linkId=d41052692a129c5264e983927c03ed62&language=en_US&ref_=as_li_ss_tl
Sportneer Compass with Inclinometer: amzn.to/4c5ziz3
@mineoperator thank you. I need to map out my mine as i start to open it back up. And see the numbers on the veins running thru it.
@@miketheminer2023 Brunton compasses are the bomb. Probably more pricey, but worth the $
👍
Can't leave thumb up
What compass is that? Thx
That would be the following compass: www.amazon.com/Sportneer-Lightweight-Inclinometer-Waterproof-Backpacking/dp/B081R5ST38?crid=IZ5BY3XA0K6G&dib=eyJ2IjoiMSJ9.eg49PqOHS2zux4MqoerzfeoTCw45ds4Q3Jya6bBqb23PmAOTwC-vvm-LOT5n7AZTSW4i6y1BfVvzEGGYJ5_cRKMP_fTq8Brio2hJb-Im8b207NG63qMq81HRE_oL1HyM1dPlnPoEji9wt_kq56q0qWj-BkN7Jd_xIkHe4jJd6rnNkm0dFvrjR2EMoumdilRIuBIS9WjIILe2xPXPmYLdx4E9qZsH0wE0kXryszEiLYR2KJa6sNPVAJ4Auc4RpkgH7NI5W_-cRa07ADJYQ-ToEodUwrHmLAPE-yhQ4oUrAls.9ASp8QXU9yMRPK-3lWN85JFr18vByITaUJir2c_ea-k&dib_tag=se&keywords=Sportneer+Compass&qid=1717790286&sprefix=sportneer+compa,aps,172&sr=8-10&linkCode=sl1&tag=mineoperator-20&linkId=d41052692a129c5264e983927c03ed62&language=en_US&ref_=as_li_ss_tl
That's some really rich ore!
Great job Chad! (~_^)-b
What happened to the dump that you and Freddy and Juan was working on? Didn't that have millions in gold?
The jaw crusher was down for a few months. We got it operating again but had issues running volume, especially without heavy equipment. The solution, the clarifying tank helps us salvage water and handle our tailings and silts way better than before. 1 ton is easy, but 4-10 tons is a different beast. We are back out there again and will report in soon! Their fixes are still going strong. Our season just started.
Hey Guys... Also -- Don't forget to take your socks and underwear. 👍
Good video