InMotion V13 EUC Teardown - The best build quality!?

Поділитися
Вставка
  • Опубліковано 7 лют 2025
  • Doug and Albert from eevee's new service centre tear down the new InMotion V13 with Bradley to see what's inside and see if the V13's build quality lives up to the hype.
    Please note that we tore it down completely (the long way) but there is an easier way to access the motor and change the tire. A special thanks to ‪@TrungNguyenSquallLHeart‬ who shows us how to easily drop the motor in this 5-minute video: • InMotion V13 Motor Dro...
    Pre-Order the InMotion V13 in US and Canada here: eevees.com/col...

КОМЕНТАРІ • 110

  • @jgray1308
    @jgray1308 2 роки тому +19

    These teardown videos are really well done! I appreciate the insights provided by Albert and Doug and the close up camera work. I'm impressed with the build quality of the V13 and looking forward to your teardowns for the EX30 and the Commander Pro.

  • @YourAubsome
    @YourAubsome 2 роки тому +2

    @20:05 - please compare the S22 motor to the S22 pro motor when you get one (show us the inner workings side by side). I want to know if Kingsong is actually upgrading the motor power or just giving us some sales BS.

  • @Fumanchuisnotdead
    @Fumanchuisnotdead 3 місяці тому

    Si pinchas tienes que desmontar todo el monociclo!! Que barbaridad. Y veo muchísimo mantenimiento a esta rueda con las guías suspensión, limpieza guías etc...harán muy ricos a los mecánicos de euc 😂😂

  • @nomadmusk
    @nomadmusk 2 роки тому +5

    With each wheel release I am more and more happy with the s22 repair friendly design. With the pro's improvements it's definitely my favorite to-date.

    • @Cons2911
      @Cons2911 2 роки тому

      Is the pro available yet? I really want one, not sure If I could

    • @skiddysm
      @skiddysm 2 роки тому

      Same but I wish inmotion would make a s22-ish design and I just watched a video og begode ex30 very good

  • @wheelydope
    @wheelydope 2 роки тому +1

    I was just thinking “man I wish eevees had new content” earlier today. Well happy Sunday to me 😁

  • @bardib2021
    @bardib2021 2 роки тому +5

    Great video once again! Looking forward to your motor comparisons of the 4000 watt ex30 again this 4500 watt power house. Have you done other motor comparisons on video? You should, really see the difference in where the power comes from!

  • @Roskellan
    @Roskellan 2 роки тому +4

    Really clear tear down. It's certainly a bit of a beast. Looking forward to your forthcoming videos

  • @AerialMax8
    @AerialMax8 2 роки тому +4

    That thing is built amazingly. So much work to be safe but more expensive as a result.

  • @kaygee1623
    @kaygee1623 2 роки тому +1

    Very interesting video, euc's have come a long way quality wise.

  • @roblee9565
    @roblee9565 2 роки тому +1

    Greek food chain 😂 Bradley send this guy to tarpon springs for a weekend!

  • @robotob46
    @robotob46 2 роки тому +3

    Wish we had the battery and suspension from the Sherman s and everything else from the v13... Looking forward to the future! 🙂

  • @jeffreytong
    @jeffreytong Рік тому +1

    Any updates to the video for the controller disassembly?

  • @caliman99
    @caliman99 2 роки тому +1

    how to drop the motor tutorial: ua-cam.com/video/0Q7m3g3gk6c/v-deo.html

  • @CaptainJacksIsland
    @CaptainJacksIsland Рік тому

    19:44 that's a very technical term 😆

  • @charliethechaplin
    @charliethechaplin 2 роки тому

    Great video!

  • @megaobi
    @megaobi 2 роки тому

    love these vids!

  • @quinnfoster1234
    @quinnfoster1234 2 роки тому +1

    Waiting patiently for Floatwheel teardown and thoughts.

  • @dirt.surfer
    @dirt.surfer 2 роки тому +1

    Nice I been waiting for this. Thank you eevees

  • @EmanueleTomasello
    @EmanueleTomasello 2 роки тому +1

    the amount of parts and screws is insane, nice video btw !

  • @thienpham317
    @thienpham317 2 роки тому

    Very good 👍🏻 video and informative. Thanks again guys!!!

  • @ChrisH0Y
    @ChrisH0Y 2 роки тому

    One thing I see in this video is the greased parts need to be protected from kicked-up sand and dirt. From winter cycling experience, sand and dirt will stick to grease, and create an abrasive paste that will wear down any moving parts the grease is on. That is probably why you go through so many V11 sliders - and likely will with the V13 as well. I also see the grease and sand on the hub. A rubber seal like the later batches of V11 could work well here on the v13. The way the V13 electronics / electrical system is put together is very much like an Apple Macintosh. Very clean and orderly. I do agree with @tobymizewizeguy3559 that if you put on the Sherman-S suspension, and battery capacity of 3,600wh, this would be best wheel on the market.

  • @freeforester1717
    @freeforester1717 2 роки тому +4

    It’s too bad that Inmotion have not provided any real explanation of how the suspension system (the main ‘advantage’ of this otherwise excellent wheel) is meant to be adjusted or indeed their design concept, which would give users a better insight and understanding of their function and adjustment. If it were a car, one would expect a bit of blurb at least explaining this, and a couple notes in the user manual, to help the user. It would be interesting to weigh the total amout of fixings, lol! I think it would be good to show the ’quick’ tyre change teardown, to help allay concerns of anyone looking to swap to a different tyre.

  • @RresponsibleME
    @RresponsibleME Рік тому

    I may prefer this wheel all over all other wheels purely because of the build quality, The suspension has been the only drawback for me but I think I'll either run it without suspension or with the dampening as high as I can get it and just keep it soft with minimal rebound and avoid going over jumps and curbs and bumps as best I can.

  • @JessePike5
    @JessePike5 2 роки тому +1

    I love teardowns

  • @yusufcanaktas6929
    @yusufcanaktas6929 2 роки тому

    what is the magnet size of the motor?

  • @skiddysm
    @skiddysm 2 роки тому

    Hey speaking of stripped kingsong screws/bolts you should make a better quality set of bolts/screws for the s22 i know every owner would buy it

  • @grb1969
    @grb1969 Рік тому

    Any indication who manufactures the shock cylinder? Part Number?
    It would be worth checking our several shock suppliers to find an alternative part source? And, if this is a standard design (highly likely) then we should be able to find a higher quality replacement unit.
    Personally, I will not buy the V13 or any suspension wheel unless the shocks are easily up-gradable and from multiple sources. The true "value" in the original military "Jeep" was that parts are readily interchangeable from multiple sources. The fact that there isn't an indexed indent on the shock adjustment is unacceptable for future batches as well.

  • @Jimbow18
    @Jimbow18 2 роки тому

    Do you do repairs

  • @DihkFace_Mcghee
    @DihkFace_Mcghee 2 роки тому +1

    Can I come work at your repair center?

  • @TheBuzzBen
    @TheBuzzBen 2 роки тому

    More screws is under-engineering. 😢
    I was wondering, how many screws needs to be removed to change the tire? AKA basic maintenance?

    • @eevees
      @eevees  2 роки тому +1

      Luckily they designed it with easy tire changes in mind! Check out the link in our video's description

  • @dockertonfpv
    @dockertonfpv 2 роки тому

    Ok just got to the motor drop part -.- wow thats easy... should have watched longer XD

  • @stevescott5858
    @stevescott5858 2 роки тому

    Master pro tear down?

  • @tanknd804
    @tanknd804 2 роки тому

    Why won't you be carrying the commander pro?

    • @eevees
      @eevees  2 роки тому

      m.ua-cam.com/video/vU4YObjVA_A/v-deo.html

    • @tanknd804
      @tanknd804 2 роки тому

      @eevees OK.
      I had watched the video that you just sent me. But it seems that you had said that you weren't going to carry it BEFORE the teardown....you said it in THIS video.
      But I guess you had already tore it down once before the video teardown.

    • @eevees
      @eevees  2 роки тому

      @@tanknd804 that is correct. We have an employee in China who has already seen it and warned us of the poor quality. We didn’t know it was this bad until we did the teardown though.

    • @legyroquoi
      @legyroquoi Рік тому

      Can you lower the pedals with the suspension on??

  • @cocoabiscuits
    @cocoabiscuits Місяць тому

    The cost of just one side of that battery panel is as much as what i bought the whole v13 new for 😅

  • @godismeme272
    @godismeme272 2 роки тому

    I still want that stand LOL

  • @npalmi88
    @npalmi88 Рік тому

    These things should be built to be able to EASILY take apart and put back together - no GLUE, not plastic connectors, etc

  • @Papalou1234
    @Papalou1234 2 роки тому +1

    thanks guy for doing this😂😂😂 its gonna be difficult to put that together hes said😂what a freakin nightmare to o a tire change 😡
    really impressive how clean cable management and how its build....

    • @eevees
      @eevees  2 роки тому +1

      It’s actually super easy to drop the motor the easy way. Check the link in our video description

  • @edcampstore965
    @edcampstore965 2 роки тому

    Still searching for a reason (justification) for why I need a motorcycle that fits into the trunk of my car 🤔. Can anyone help me delude myself into buying another wheel? 🙈

  • @DonovanWert
    @DonovanWert 2 роки тому

    You can send it out to Abby for testing!!😜
    I would’ve put 100km on it in one day!! LoL

  • @organicparadox
    @organicparadox 2 роки тому

    Really aappreciate you guys on this teardown. Poor inmotion is drinking their own kool-aid too much and didn't learn enough from the v11's shortcomings. ShermanS all day over this greasy wood screw mess

    • @kamencic
      @kamencic 2 роки тому +1

      Obviously biased comment. There were like 4 wood screws.

    • @organicparadox
      @organicparadox 2 роки тому

      @@kamencic i've had two v11's, I could comment more on the similar crappy suspension design that will likely leak as easily as the v11, and just and annoying to adjust. I buy all my own stuff and ride for my own opinions. Compared to the ShermanS suspension, there is no comparison

    • @kamencic
      @kamencic 2 роки тому +1

      @@organicparadox regarding the suspension I agree.

    • @sammysokosammysoko
      @sammysokosammysoko 2 роки тому +2

      @@organicparadox Regarding power, speed, stability, build quality, water proofing, smart BMS, and safety features there is no comparison. V13 all the way.

    • @organicparadox
      @organicparadox 2 роки тому

      @@sammysokosammysoko for me, I got the ShermanS and the Begode Master so I'm happy as a clam. I'll compare them when the v13 lands in my town. toodles!

  • @HumbolSkitso
    @HumbolSkitso 2 роки тому +2

    Lol its crazy how much people dont understand that this is a freakin TEARDOWN🤦‍♂️the words in the damn title.

  • @Randoman9987
    @Randoman9987 2 роки тому

    ♥♥♥ EEVEE'S ♥♥♥

  • @bookmark2846
    @bookmark2846 2 роки тому

    I would pay extra for a wheel that is easier to work with. My strategy so far has been to sell my wheels before the tires go bald so I don't have to change them but it is getting expensive...

    • @eevees
      @eevees  2 роки тому +1

      Check the link in our description. It’s actually incredibly easy to do a tire change on the V13

    • @bookmark2846
      @bookmark2846 2 роки тому

      @@eevees Fantastic! V13 might be my next wheel once the tire on my commander goes bald, lol.

  • @snipershotsphotography7915
    @snipershotsphotography7915 2 роки тому

    crazy copper

  • @Laic
    @Laic 2 роки тому +1

    No their is an easier way to get to the mother for tire change

    • @eevees
      @eevees  2 роки тому +1

      Yes, we mention it in the video and also link a video in the description to the easier method

    • @Laic
      @Laic 2 роки тому

      @@eevees saw It near end of vide

  • @Roskellan
    @Roskellan 2 роки тому

    Expecting great things in the review : ua-cam.com/video/4R2AQThOwa0/v-deo.html

  • @DJChrismaz
    @DJChrismaz 2 роки тому +1

    This is the real problem with those new wheels. Too heavy, too complicated to change just a tire. The best seller will be a wheel that you can swap a tire in few minutes

  • @caliman99
    @caliman99 2 роки тому

    I like that you tore it completely down, but you don't have to in order to change the motor.
    see this video: ua-cam.com/video/0Q7m3g3gk6c/v-deo.html

    • @eevees
      @eevees  2 роки тому +2

      Thanks! But yeah, we actually refer to that video in our video and left a link in the description:)

    • @caliman99
      @caliman99 2 роки тому

      @@eevees That's what i get for watching with sound off. And not reading description. Derp. Great video, though. Thorough and funny.

  • @mahdihosseini6361
    @mahdihosseini6361 2 роки тому

    Why did you do this video if you didn't want Open up the most important part???

    • @eevees
      @eevees  2 роки тому +3

      To see the overall build quality?

  • @Fumanchuisnotdead
    @Fumanchuisnotdead 3 місяці тому

    Pesado y muy caro por lo que es.

  • @arevee9429
    @arevee9429 2 роки тому +2

    A lot cleaner looking than a Begode, but a tire change would be a nightmare. And so heavy!

    • @EUCRAZY_AU
      @EUCRAZY_AU 2 роки тому +1

      ua-cam.com/video/uTIGQXQ_7Mc/v-deo.html&ab_channel=SquallLHeart 10 min tyre change ?

    • @jamesbarry2388
      @jamesbarry2388 2 роки тому +1

      It’s hell of a lot easier than the v11 simple

    • @TrungNguyenSquallLHeart
      @TrungNguyenSquallLHeart 2 роки тому +6

      not really... didn't take me very long at all to do my own tire change.

    • @EUCRAZY_AU
      @EUCRAZY_AU 2 роки тому

      @@TrungNguyenSquallLHeart lol :P

    • @HumbolSkitso
      @HumbolSkitso 2 роки тому +4

      Not at all, this wasnt a "how to change v13 tire" video. This is a TEARDOWN. Tire changes are way easier.

  • @HungrySpinz
    @HungrySpinz 2 роки тому

    This wheel has 4k worth of screws

  • @FourthWayRanch
    @FourthWayRanch 2 роки тому

    it's too much money for something that can end up cartwheeling down the road tearing itself to pieces.
    better check under the circuit board cap on your V11s for frayed wires from the sharp edges.

    • @0xsergy
      @0xsergy 4 місяці тому

      don't ride it like an idiot and it won't cartwheel. no need to go the max speed the wheel is rated for, go as fast as you're confident to keep in control.

  • @realvikingsrideelectricuni6054

    EUC porn!

  • @TechMan042
    @TechMan042 2 роки тому +12

    I hope the V14 takes cues from the S22 more than the V11

    • @skiddysm
      @skiddysm 2 роки тому

      Can't agree more

  • @jamesbarry2388
    @jamesbarry2388 2 роки тому +4

    I’ve already seen a tire change simple on this one. Why would anyone want to take this apart like you did. Most people are just doing a simple tire change. Not tearing the wheel apart 🙄

    • @critzlez8593
      @critzlez8593 Рік тому

      What? Are you dumb? Read the description. The teardown was for checking the build quality.

  • @groundcontrolgainesville4841
    @groundcontrolgainesville4841 2 роки тому

    The suspension design is the Achilles heel once again. It's designed to wear.

    • @QQ251647742
      @QQ251647742 2 роки тому

      So the wear on the suspension slider is inevitable for every V13?

  • @Hunter_Heart
    @Hunter_Heart 2 роки тому +2

    Suspension are really an after thought on V13 and prepare yourself for future replacements. They could cut down the screws with wires/cables hold down. There are not much rubber seals, I wouldn't ride V13 in the rain. Their waterproof rating is a joke, no need to show us the waterproof paperwork, inmotion. Love the tear-down.

    • @TrungNguyenSquallLHeart
      @TrungNguyenSquallLHeart 2 роки тому +2

      I've been riding my V13 in weeks of rain.. got hundreds of miles in the rain..

    • @Hunter_Heart
      @Hunter_Heart 2 роки тому

      @@TrungNguyenSquallLHeart You are not the first, that's how they have to change bearing, motors and motherboards. But made sure to report once you have problems.

    • @TrungNguyenSquallLHeart
      @TrungNguyenSquallLHeart 2 роки тому +1

      @@Hunter_Heart the bearings are well protected, as shown in this teardown.. I also inspected my wheel during my tire change after I had ridden the wheel in the rain several times.. bearings are fine.

    • @Hunter_Heart
      @Hunter_Heart 2 роки тому

      @@TrungNguyenSquallLHeart I don't see the bearing that well protected, eevee boi even said it eventually dry out. I want a big chunk of marine greese at the bearing, but its not what I am seeing in the tear down. If its not water sealed like a boat, water will make it way in, eventually. Also factor in how hard it rained and how much time you spend in the heavy rain/storm.

    • @HumbolSkitso
      @HumbolSkitso 2 роки тому +2

      I smell a Begode fanboy

  • @AirsoftArg
    @AirsoftArg 2 роки тому

    Those guys are suppose to be ''experts''? Omg....

  • @loufugier3481
    @loufugier3481 2 роки тому

    really interesting before spend 4000 dollars

  • @milordas
    @milordas Рік тому

    in V11 you was needed to inflate 2 air shocks, now you'll have to inflate 4... another idiotic suspension design