I just bought mine today and I'm returning it tomorrow due to failing to pair it with the polar flow app on my phone. This is the second Polar watch that I'm returning, the first one was a A360 which was constantly crashing in the middle of my running sessions. Polar has some major software flaws and serious conectivity issues. I will never buy from them again !
So sorry to hear that Cristian. Hope we can help. Do you have an Android phone ? There is plenty of variation between how different Android devices handle the technologies used in our products and services, such as Bluetooth Low Energy (BLE) and different standards and protocols. Because of this, compatibility varies between phone manufacturers, and unfortunately Polar cannot guarantee that all features can be used with all devices. If you still want to try pairing your M430 you can follow these step-by-step instructions: bit.ly/2XzRYzz
Just received mine. Setup using the watch itself. No pulse detected. I wear a fitbit on that wrist and it shows a pulse. This is my 3rd Polar heart rate monitor over the years. First to have issues. Update: I was able to get the pulse to activate after about 30 minutes. It worked once I synced it thru computer.
Hi Lorie! Sorry to hear that you experienced the HR-related issue on your new Polar M430. Can you please drop a message to our Customer Care team using this form: bit.ly/Polar_Support_Request? They'll do their best to assist you as soon as possible. 😊
I am not able to sync Polar Flow App (LG V20 android) with the Polar Flow app with almost any combination of trial that is known to me including factory / soft-reset of M430, switching flight mode on/off, re-installation of Polar Flow App, switching bluetooth off/on on my android, power on/off my android, ... , please help.
I presume you are referring to the "BACK" button which is the found in lower left hand side of the watch. The Polar m430 try to sync with the Android Polar Flow after I have a long press of the "BACK" but it fails. I have tried to re-start the Android and it works if Polar m430 is the only connnected bluetooth device other than bluetooth hand free. It will never work if I have my bluetooth connection setting with e.g. Suunto Ambit3 as a paired bluetooth device with Polar m430. Not sure why but Suunto Ambit3 will able to sync with the Android even with Polar m430 bluetooth setting installed. In short, thanks for your advice but it just does not work for me.
After 2 weeks of trying, at last pairing issue solved. connect the device to your PC via cable and FlowSync software, and perform factory defaults. When that's complete, disconnect the cable and start the phone flowSync app. (don't pair it via bluetooth settings, pairing is done by the app)
Hello, is it possible to configure this watch WITHOUT smartphone? I don't have a smartphone, and I don't want anything fancy. I just want to know my heart rate when doing exercises, that's all (giving the time wouldn't be a bad idea either...). I have also read somewhere that it had a vibrating alarm instead of a sound alarm. I find this feature interesting especially to be notified when getting out of heart rate range : the place where I train is often noisy, and I can't hear the beeps of my watch.
Hi there! You can use and synchronise your Polar device without smartphone if you have a computer. For more information about the Polar M430, please check the following website: www.polar.com/en/products/sport/M430-gps-running-watch
i bought mine today and to set it up was so easy, Go to settings, General settings and click on pair device and it will literally sync with the app it took no longer then 3 minutes to do it
DONT pair your watch via bluetooth on your phone!!!! it will screw with the connection from the watch to the app, if you go under settings > general settings > pair and sync > pair and sync to mobile device and then you enter the polar flow app it will automatically detect your watch and then ask to pair it, and its easy from there on.
Dragonis thank you!!! I never had my device completely disconnect before and couldn’t get it to repair via Bluetooth! This comment saved me a TON of struggle lol
Everyone that came here because can´t sync your Polar M430 with your phone using the app Polar Flow: Conect you watch on your PC and restore the manufacture configurations. After that, you will be able to sync it using the app. At least it worked for me.
Worst cable connector, ever. You don't enough the USB, you have to push your fucking cable type, which is a piece of shit. Well done, my wife's suffering with your shit, I'll buy a Garmin or anything else.
it would be nice to make a detailed video how to pair and connect the m430..
Im excited, hope my chosen program gives me the extra motivation to train for a better aerobic fitness level.... onward!
I just bought mine today and I'm returning it tomorrow due to failing to pair it with the polar flow app on my phone. This is the second Polar watch that I'm returning, the first one was a A360 which was constantly crashing in the middle of my running sessions. Polar has some major software flaws and serious conectivity issues. I will never buy from them again !
So sorry to hear that Cristian. Hope we can help. Do you have an Android phone ? There is plenty of variation between how different Android devices handle the technologies used in our products and services, such as Bluetooth Low Energy (BLE) and different standards and protocols. Because of this, compatibility varies between phone manufacturers, and unfortunately Polar cannot guarantee that all features can be used with all devices. If you still want to try pairing your M430 you can follow these step-by-step instructions: bit.ly/2XzRYzz
i like the ft4 its great
I have the same problem syncing my M430 with my mobile not work, you have to be a rocket scientist for it to work ???? :((
Just received mine. Setup using the watch itself. No pulse detected. I wear a fitbit on that wrist and it shows a pulse. This is my 3rd Polar heart rate monitor over the years. First to have issues.
Update: I was able to get the pulse to activate after about 30 minutes. It worked once I synced it thru computer.
Hi Lorie!
Sorry to hear that you experienced the HR-related issue on your new Polar M430.
Can you please drop a message to our Customer Care team using this form: bit.ly/Polar_Support_Request? They'll do their best to assist you as soon as possible. 😊
@@PolarGlobalI was able to get the pulse to activate after about 30 minutes. It worked once I synced it thru computer.
I am not able to sync Polar Flow App (LG V20 android) with the Polar Flow app with almost any combination of trial that is known to me including factory / soft-reset of M430, switching flight mode on/off, re-installation of Polar Flow App, switching bluetooth off/on on my android, power on/off my android, ... , please help.
I presume you are referring to the "BACK" button which is the found in lower left hand side of the watch. The Polar m430 try to sync with the Android Polar Flow after I have a long press of the "BACK" but it fails. I have tried to re-start the Android and it works if Polar m430 is the only connnected bluetooth device other than bluetooth hand free. It will never work if I have my bluetooth connection setting with e.g. Suunto Ambit3 as a paired bluetooth device with Polar m430. Not sure why but Suunto Ambit3 will able to sync with the Android even with Polar m430 bluetooth setting installed. In short, thanks for your advice but it just does not work for me.
After 2 weeks of trying, at last pairing issue solved. connect the device to your PC via cable and FlowSync software, and perform factory defaults. When that's complete, disconnect the cable and start the phone flowSync app. (don't pair it via bluetooth settings, pairing is done by the app)
I did it but to no avail
Finally, that did it. Factory reset and reinstalled the app also for good measure. Thanks!
So I need to use a computer?
@@dennedahlstrom I have the same issue mate. Using a computer will not solve the pairing issue with the Polar Flow app on your phone.
Referring to to the Bluetooth pairing which does not work with my device
dosen´t work :(
you have to connect the watch to you pc first, after that the watch is able to connect to a phone
Hello, is it possible to configure this watch WITHOUT smartphone? I don't have a smartphone, and I don't want anything fancy. I just want to know my heart rate when doing exercises, that's all (giving the time wouldn't be a bad idea either...). I have also read somewhere that it had a vibrating alarm instead of a sound alarm. I find this feature interesting especially to be notified when getting out of heart rate range : the place where I train is often noisy, and I can't hear the beeps of my watch.
Hi there! You can use and synchronise your Polar device without smartphone if you have a computer. For more information about the Polar M430, please check the following website: www.polar.com/en/products/sport/M430-gps-running-watch
@@PolarGlobal Thank you.
@@PolarGlobal is there a video on pairing the M430 with the heart strap H10?
Doesn't work for me, considering returning this watch, thanks...
Same here, no way for the watch to pair with my phone. I'm returning it tomorrow. What happened with yours?
I also normally have a giant unnatural smile on my face when I use software.
Not working with Phone note 9 is likely to be a problem due to the Android system
No connection with iphone 6, iOS 11.4(((
i bought mine today and to set it up was so easy, Go to settings, General settings and click on pair device and it will literally sync with the app it took no longer then 3 minutes to do it
DONT pair your watch via bluetooth on your phone!!!! it will screw with the connection from the watch to the app, if you go under settings > general settings > pair and sync > pair and sync to mobile device and then you enter the polar flow app it will automatically detect your watch and then ask to pair it, and its easy from there on.
Thx !
Still not working as you say !
Dragonis thank you!!! I never had my device completely disconnect before and couldn’t get it to repair via Bluetooth! This comment saved me a TON of struggle lol
Everyone that came here because can´t sync your Polar M430 with your phone using the app Polar Flow: Conect you watch on your PC and restore the manufacture configurations. After that, you will be able to sync it using the app.
At least it worked for me.
No me reconoce el dispositivo en el pc, antes si, y además no se carga la batería aunque se ve moverse.
Vittu oli paska guide :DDD
TIPP: First you have to connect the watch to your PC. After that the watch is able to connect to a phone. Thank me later.
Why dont you people have any option to factory reset without connecting to a pc. Completely useless for this ampunt of money. Scammed ffs
Worst cable connector, ever.
You don't enough the USB, you have to push your fucking cable type, which is a piece of shit.
Well done, my wife's suffering with your shit, I'll buy a Garmin or anything else.