Great video Dave, what you've shown is that this setup is fine for the person dipping a toe on a limited budget, you can see and measure the pockets and valve timing. 👍
Interesting stuff Dave....Chapter 7 in Graham Stokes Automotive Oscilloscopes is also a wealth of info on the topic (I know few will have this book, but you do). Cheers Pal, enjoy the race weekend and all the Hairy Chest to you too good Sir 🤣
Cheers ian, good book for reference like the other stokes book. I cant believe we're finally getting a race, looking forward to Sunday, no cars booked in, weekend off. Cheers mate
Obrigado pelo vídeo Sou do Brasil qual é o tempo de resposta desse transdutor? Ele tem atraso? Aqui nos usamos uma técnica de transdutor de pressão com sensor de rotação. Por isso gostaria de saber se tem atraso
Hi Dave. Thanks for the great info. In the video you are using the 2204a scope in stream mode and capture 3 Ms/s .how is it possible? As far as I know the maximum sample rate of this scope in stream mode is only 1Ms/s. Thanks
Picotech seem to be conservative with their claims. I have a 2405 (4 channel/25Mhz) and I get almost 9Ms/s in streaming mode. Way more than advertised. I only get that with one channel - if I add a second channel then it halves as you'd expect, but it's still very impressive.
i was thinking of buying compression tester and mocking this up with the hoses/connectors from that then i thought why not just tee in the pressure trasnsducer to a compression guage then you can see what psi from the guage and compare that too the voltage output of transducer and really leave out the math and guess work.
Part 1 ua-cam.com/video/bSzT0Et50PY/v-deo.html
In Cylinder Pressure Analysis
autoditex.com/page/cylinder-pressure-sensor-64-1.html
Nice video Dave , full of information, maybe time to dig out my old Krypton machine 😂😂
Lol mike
Great video Dave, what you've shown is that this setup is fine for the person dipping a toe on a limited budget, you can see and measure the pockets and valve timing. 👍
Absolutely Steve, shows everybody can move into this type of testing
Interesting stuff Dave....Chapter 7 in Graham Stokes Automotive Oscilloscopes is also a wealth of info on the topic (I know few will have this book, but you do). Cheers Pal, enjoy the race weekend and all the Hairy Chest to you too good Sir 🤣
Cheers ian, good book for reference like the other stokes book. I cant believe we're finally getting a race, looking forward to Sunday, no cars booked in, weekend off. Cheers mate
Obrigado pelo vídeo
Sou do Brasil qual é o tempo de resposta desse transdutor? Ele tem atraso? Aqui nos usamos uma técnica de transdutor de pressão com sensor de rotação. Por isso gostaria de saber se tem atraso
Hi Dave. Thanks for the great info. In the video you are using the 2204a scope in stream mode and capture 3 Ms/s .how is it possible? As far as I know the maximum sample rate of this scope in stream mode is only 1Ms/s. Thanks
Ive no idea, im only going by the properties data, cheers
Picotech seem to be conservative with their claims. I have a 2405 (4 channel/25Mhz) and I get almost 9Ms/s in streaming mode. Way more than advertised. I only get that with one channel - if I add a second channel then it halves as you'd expect, but it's still very impressive.
i was thinking of buying compression tester and mocking this up with the hoses/connectors from that then i thought why not just tee in the pressure trasnsducer to a compression guage then you can see what psi from the guage and compare that too the voltage output of transducer and really leave out the math and guess work.
what guess work?
Find the items that are used on the Dave Sterl channel in the Amazon shop.
www.amazon.co.uk/shop/davesterl
Hi Dave, do you have the part Number for the honeywell 250 psi transducer< would like to try it out, Cheers
In part 1