Derek ,thank you, Hiley GMC in Fort Worth, quoted me a price of $330.00 and said it would take 2 hrs, what LIARS!! I order it off ebay, watched YOUR video and put it on in less that 1 minute, folks are really being ripped off by these wicked car dealers!! Thanks again!!
IF YOU ARE VIEWING THIS VIDEO, FOLLOW EVERYTHING HE SAYS EXCEPT DO NOT REMOVE THE LITTLE SCREW AS IT MAY FALL KEEP YOUR SCREW IN PLACE AND JUST ALIGN YOUR NEW DOOR HANDLE, HAVE SOME ONE ASSIST YOU BY PLACING PRESSURE ON THE DOOR ENSURING IT WILL NOT MOVE AND RESULT IN YOU ACTUALLY DROPPING THE SCREW, ONCE THE NEW HANDLE IS PROPERLY ALIGNED SIMPLY SCREW IN PLACE TAKES ALL OF 2 MINS PER DOOR
Looks super easy, but the end cap I'm replacing doesn't have a mounting plate on the door like your vehicle. The prior owner apparently used some kind of bonding compound to secure the end cap to the door. Does the mounting plate come with the replacement part? I have a certified GM end cap coming in the mail, but not sure if I'm still missing a part to make this work. I have a 2008 Hummer H3 Alpha.
Hey Derek! Great vid as always, quick non related question tho...your interior (seats & doors) looks amazing and I’m assuming it’s aftermarket, any chance you could direct me to where I can find those for my H3? 🤙🏼 Thanks! Jason
thanks great, after 5 Years driving a Hummer the Owener is a perfect Mechanic American Cars are like Children.... every week a new Problem ;o) thats why I drive a Hummer as a German ---- i have no Kids ;o)
I went and drilled it out. If I remember right, I cut the cap piece off, to expose where the screw was threaded into, then used a drill to drill out the screw.
Crackhead jumped in front of my car, got on my hood, rode on the side of my car and was trying to get into my car and pulled my door handle off. It was insane. He got arrested.
Derek ,thank you, Hiley GMC in Fort Worth, quoted me a price of $330.00 and said it would take 2 hrs, what LIARS!! I order it off ebay, watched YOUR video and put it on in less that 1 minute, folks are really being ripped off by these wicked car dealers!! Thanks again!!
Спасибо! Thanks!
Watched the video. Took only a couple of minutes per door handle. Great info
Thank you for making my project simple...I followed your instructions to the T...
IF YOU ARE VIEWING THIS VIDEO, FOLLOW EVERYTHING HE SAYS EXCEPT DO NOT REMOVE THE LITTLE SCREW AS IT MAY FALL KEEP YOUR SCREW IN PLACE AND JUST ALIGN YOUR NEW DOOR HANDLE, HAVE SOME ONE ASSIST YOU BY PLACING PRESSURE ON THE DOOR ENSURING IT WILL NOT MOVE AND RESULT IN YOU ACTUALLY DROPPING THE SCREW, ONCE THE NEW HANDLE IS PROPERLY ALIGNED SIMPLY SCREW IN PLACE TAKES ALL OF 2 MINS PER DOOR
I could not get the handle off but the latch on the inside isnt clicking in. Suggestions?
Damn was almost going to pay someone to do that. Thx a bunch
Thank you from Russia!
Looks super easy, but the end cap I'm replacing doesn't have a mounting plate on the door like your vehicle. The prior owner apparently used some kind of bonding compound to secure the end cap to the door. Does the mounting plate come with the replacement part? I have a certified GM end cap coming in the mail, but not sure if I'm still missing a part to make this work. I have a 2008 Hummer H3 Alpha.
quick question, does it matter when doing the install if your door is lock on or off while replacing the door handle?
Great video! Thanks man
Koo thanks for the info man 👍🏻 gonna paint my with ryno liner. The chrome on the Hummer Whyyyyyyyyy! Lol
Dang, that was Amazing!
Got any videos on an H2 door handle replacements? Thx in advance.
Hey Derek!
Great vid as always, quick non related question tho...your interior (seats & doors) looks amazing and I’m assuming it’s aftermarket, any chance you could direct me to where I can find those for my H3?
🤙🏼
Thanks!
Jason
It's so easy a Caveman could do it. Thanks ; }
What size crew is that mine rusted
thanks great,
after 5 Years driving a Hummer the Owener is a perfect Mechanic
American Cars are like Children.... every week a new Problem ;o)
thats why I drive a Hummer as a German ---- i have no Kids ;o)
hahahaha, that's funny man. Lustig
Is it the same for rear door handles?
What would you do if the bolt just spins in the stock cap? I have one out of 5 that is like the threaded sitting is just spinning in the plastic.
I have same issue, ever figure it out?
I went and drilled it out. If I remember right, I cut the cap piece off, to expose where the screw was threaded into, then used a drill to drill out the screw.
Bro the back door handles sloped off to be puppy now they won’t open from the outside
Mine as well, won't open from outside??
To be puppy? Wtf does that mean? 😂
Thank you Sir
great info
Put a little piece of masking tape inside your socket it will hold the bolt in place during removal and replacing
Wow that was great 😂
awesome thx
awesome. thanks!
yeessseur!
Crackhead jumped in front of my car, got on my hood, rode on the side of my car and was trying to get into my car and pulled my door handle off. It was insane. He got arrested.
I lost the screw 😭
You're screwed!