Pipe Routing is the most important skill for Piping Design Engineer. It important to see from the perspective of a design engineer inorder to design a piping system. This course would help to become one. Course link : pymedaca.com/courses/pipe-routing/
I Can't tell how crisp , accurate and full of industry examples was this video. Need hundreds of these videos on every topic. Pls keep up the excellent work. I already subscribed.
*Without wasting time* , I liked and subscribed 😁 Others just read text book datas in the name of piping Engineering vidoes, rarely saw such a good content video wherein practical requirements been shared. Please keep post this kind of vidoes.
You are giving very wonderful explanations I definitely remember that this is an important video in the field of piping.I think the problem people who work in the piping industry have is that they lack basic knowledge since they do not create the opportunity and do not know . who work in piping field for many years without further strengthening themselves about the basics. That is the reality. All the people who watch this video of yours will definitely strengthen their skills in the field of piping and no one will have any alternative opinion on. Your video will be of great help to everyone to improve their knowledge Thank you so much for doing such a great job through your site
Hii Subhash Sir first of all thanks for your support towards us .I'm very happy that I subscribed your channel and I gone through your videos one by one it's very well explained on each points of view for our oil and gas industry. Waiting for your upcoming to upgrade ourselves... Once again thanks alot 🙏🙏
Watching your video, your example of loops going into a pump. The balance of a pump is very important,, we often need to provide some flexibility to a pump suction to prevent undue loads. I'm not so sure that I agree with you, my name shall not be shared but I'll suggest that I manage the largest Piping Engineering & Design group in North America. I will still thumbs up your video and leave you with a question. Which way does a temporary strainer go into a system and why? Please answer without looking it up. I lived and worked in Gurgaon for quite some time.......I really appreciate you taking the time to post this video to advance the knowledge
Thanks for complimenting. The point is should not provide loops which would disturb the gravity flow and moreover upward loop ll become a place for vapour accumulation which is not good for suction due to cavitation issue. Flexibility loop is required only if the nozzle load goes high. Strainer should be near to pump suction nozzle and it should be accessible for maintenance.
Sir please tell me about what’s should be distance between one pipe to another pipe And what should be distance between equipment wall to pipe as you show by routing pipe on tower close to towers wall so please tell about
Ok. Pipe to pipe distance is known as pipe spacing which is one inch from the OD of the one pipe to the OD of the flange of other pipe. There is no such requirement for equipment and piping. Naturally piping won't be closer to equipment wall.
@@neyazsiddique3630 Are you asking in Onshore or offshore?. I have no experience in Offshore if thats your question. I am specialized in onshore process plant design.
Hi Neyaz, I can understand your eagerness, but I have planned certain videos inorder to teach you systematically. If I jump in to another level, would create some confusions. Please keep watching, more interesting videos are coming up. Thank you for being a continuous follower.
@@neyazsiddique3630 Yes largest line should always be outside, so that the weight of piping will go to the immediate structure and also wont cause any sagging, unlike placing it in the center. High temperature lines should also be at the edge of rack to ease the provision of expansion loop
I wish i coud if you explane what mean tie in list.. In piping Who write tie in list..and tie in list write before isometric drawing or after Thank you if you answer me and make lsson
can you please check this video words since there are spelling mistakes and also you should improve your accent and pronunciation similar to the british. apart from that looks ok.
sir you should acutually also know actually ,sir you are actually using the actually so many times which is a bad habit and which effect the way of delivering actually and feels weired actually so stop saying actually
![Lp. Сердце Вселенной #60 РОЖДЕНИЕ ЛОЛОЛОШКИ [Финал] • Майнкрафт](http://i.ytimg.com/vi/YoR0pAV9FVQ/mqdefault.jpg)
Pipe Routing is the most important skill for Piping Design Engineer. It important to see from the perspective of a design engineer inorder to design a piping system. This course would help to become one.
Course link : pymedaca.com/courses/pipe-routing/
I Can't tell how crisp , accurate and full of industry examples was this video. Need hundreds of these videos on every topic. Pls keep up the excellent work. I already subscribed.
I do not miss your videos at all times when I have time I definitely watch it to strengthen myself
*Without wasting time* , I liked and subscribed 😁
Others just read text book datas in the name of piping Engineering vidoes, rarely saw such a good content video wherein practical requirements been shared. Please keep post this kind of vidoes.
You are giving very wonderful explanations I definitely remember that this is an important video in the field of piping.I think the problem people who work in the piping industry have is that they lack basic knowledge since they do not create the opportunity and do not know . who work in piping field for many years without further strengthening themselves about the basics. That is the reality. All the people who watch this video of yours will definitely strengthen their skills in the field of piping and no one will have any alternative opinion on. Your video will be of great help to everyone to improve their knowledge Thank you so much for doing such a great job through your site
Very good presentation, easy to understand.
Below comments self says your are very good trainer. That's your achivement sir.
keep it up, nice video for self studies in piping engineering.
Thanks a lot. God bless you for your work. You are helping a lot of people become better professionals.
Thank sir piping routing much easier to understand this videos
Always thumbs up for every video from Pymedaca. Good job
Your efforts are really appreciable 🙏. Please keep posting videos sir.
Thank you, I will
Hii Subhash Sir first of all thanks for your support towards us .I'm very happy that I subscribed your channel and I gone through your videos one by one it's very well explained on each points of view for our oil and gas industry.
Waiting for your upcoming to upgrade ourselves...
Once again thanks alot 🙏🙏
very good presentation
i got lots of information from your vedios, thanks
Very good explaination thanks make video on equipment layout spacing
thanks for the videos its really good information. once again thanks
My pleasure!
Love this. Thanks for sharing sir.
THNKS SIR
Superb explanation,👌👍
I m watching your all videos it s very helpful for me
Thank you sir for informative video
Really nice ❤
Best explanation 🔥🔥🔥
Excellent explanation 👌👍 thanks alot.
Thank you for sharing this information
Thanks for passing the knowledge and experience.
Nice information sir
very usefull
I am glad you found it useful!
Thanks for explaining nicely sir.👍👌
Watching your video, your example of loops going into a pump. The balance of a pump is very important,, we often need to provide some flexibility to a pump suction to prevent undue loads. I'm not so sure that I agree with you, my name shall not be shared but I'll suggest that I manage the largest Piping Engineering & Design group in North America. I will still thumbs up your video and leave you with a question. Which way does a temporary strainer go into a system and why? Please answer without looking it up.
I lived and worked in Gurgaon for quite some time.......I really appreciate you taking the time to post this video to advance the knowledge
Thanks for complimenting. The point is should not provide loops which would disturb the gravity flow and moreover upward loop ll become a place for vapour accumulation which is not good for suction due to cavitation issue. Flexibility loop is required only if the nozzle load goes high. Strainer should be near to pump suction nozzle and it should be accessible for maintenance.
Wow this is really helpful can you make mouch more for pipe route with more detail...
New topic ma video upload karta raho
Aur accha laga aap ka kaam
Excellent.
This infromation in piping design and layout .
Very helpful video... thanks sir 👍
Thanks for explaining nicely sir. Can you please make a video for calculating the pressure drop in the pipe.
super video
Very useful sir
Can you make videos on SP 3D and E3D ??
How to do line routing study from P&ID please make detail video on it. It will help us
Sure i will. However, conceptually the requirements are same as mentioned in this video. This requirement applies to all layouts.
Thanks so much
sir its very help full sir pls do more videos and also do E3d software piping tuturial sir
Hi Jeyanth, I ll try my best to put more videos in piping. But I don't have expertise in E3D, so I may not be able to do tat.
Sir
Please make a video on heat exchanger piping with pfd and p&I'd ,unit layout
Can you suggest a book specially for piping routing......????
There is no books in the world. My course is the only gateway to learn routing. pymedaca.com/courses/
Thank you sir
Sir is pipe routings are designed in P&iDs or PFDs???
P&id
very good explanation. where's the part 2,3. etc... thanks
Thank you. I ll b posting one after other
If anyone can suggest offline course for piping engineering in india?? Please 🙏
Were is part 2 and 3 we are need more Thank for you
Part 2 was done 2 months ago. Please check the below link.
ua-cam.com/video/fYpIngT5j-A/v-deo.html
Sir please tell me about what’s should be distance between one pipe to another pipe
And what should be distance between equipment wall to pipe
as you show by routing pipe on tower close to towers wall so please tell about
Ok. Pipe to pipe distance is known as pipe spacing which is one inch from the OD of the one pipe to the OD of the flange of other pipe. There is no such requirement for equipment and piping. Naturally piping won't be closer to equipment wall.
@@pymedaca3130 ok sir thanks but I have one more question
Why the topside module are elevated approximately 4 meter the upper deck?
Above the upper deck
@@neyazsiddique3630 Are you asking in Onshore or offshore?. I have no experience in Offshore if thats your question. I am specialized in onshore process plant design.
sir when will i get part 2nd and 3rd i m waitting for that
Hi Neyaz, I can understand your eagerness, but I have planned certain videos inorder to teach you systematically. If I jump in to another level, would create some confusions. Please keep watching, more interesting videos are coming up. Thank you for being a continuous follower.
@@pymedaca3130 right sir thanks
Sir
1. why largest and heaviest line to the outside
2. Why largest and hottest line at the rack edge
Please answer me
@@neyazsiddique3630 Yes largest line should always be outside, so that the weight of piping will go to the immediate structure and also wont cause any sagging, unlike placing it in the center.
High temperature lines should also be at the edge of rack to ease the provision of expansion loop
@@pymedaca3130 thanks sir
I wish i coud if you explane what mean tie in list.. In piping
Who write tie in list..and tie in list write before isometric drawing or after
Thank you if you answer me and make lsson
It's prepared by piping at the beginning of brown field scope.
sir course please
Sir I am looking for a job regarding piping design engineer.
Can you please help me??
Join in my linkedin and message me so that we can discuss
www.linkedin.com/in/subash-chandran-v-1548b148/
Hindi mai v video upload kijye sir ok
can you please check this video words since there are spelling mistakes and also you should improve your accent and
pronunciation similar to the british. apart from that looks ok.
Sure. Ll be corrected in the coming videos
free course
sir you should acutually also know actually ,sir you are actually using the actually so many times which is a bad habit and which effect the way of delivering actually and feels weired actually so stop saying actually
Good observation. Yes i admit that I am not a good speaker. Definitely I would take your suggestions to correct my speech.
Thank you sir