You're DIY builds are top notch, some are better than the accessories being sold in the stores. You save us guys a lot of money, much appreciated bruddah..
I live in Winston Salem, NC. Every year from April thru August we have a city event called Bulky Item Pick Up. People can put just about anything on the curb during their week. We go around and pick up conduit, plastic pipe and all kinds of things. It is a DIY paradise. Enjoy your videos. Keep it up.
Only a true craftsman puts a cutting board on a drop cloth to prevent it from getting scratched too bad, Damn good job son. You are an inspiration for sure...
You are a good man ! You have a bunch of great ideas ! I saw your video and I just ordered a big chunk of plastic off of Amazon and it will be here in a couple of days ,and my neighbor friend got a 1/4 by 20 tap set , I got a half inch rod that I am gonna drill and tap for a sis bolt and it fits in my oar lock just right ! I want to thank you again for your great ideas , for us people that ain’t got a lot of money .
OUTSTANDING BROTHER!!!!! That looked every bit as professional as any of those $100+ cutting boards that are out there!!! Sure beats the two 3/4 pieces of plywood that POP and I use!!! That was outstanding!!
Thanks to your video I made a custom cutting board for my boat. The total amount for materials, including a seat mount and side mounted organizer, was $150. The cutting station turned out fantastic and looks like a factory operation for my Lowe boat..
That's awesome man , hey you think you could send me a picture of it , I would love to see your work brother . My Email is on my about page if you ever need it . It's keiff32@hotmail.com I really appreciate you watching buddy and if theres anything I can fo to help you out or anything you'd like to see I'll fo my best
Thanks for the video. I made a slight modification some people might find useful. I used a heat gun and peices of wood to bend one of the sides in about an 1.5in by 5in in length. This "clean" outside of the board spot is where I drilled spots for a knife, pliers, and quick connect so I can hang the towel I wipe my hands with.
Just made me a fancier version that holds 2 drinks and 5 shot glasses for entertaining and cooking on the new swim platform .. I only used 1 1/4 long #6 screws lol
This is another great DIY👍🏻 one thing I would add is a small opening towards the back for the water to drain out when I spray the board with the hose. Thank you! Don't stop posting 👍🏻
Good that's what I make em for, I'm the same way when I watch other ppl work , my brain starts thinking of all kinds of stuff lol . Thanks for commenting brother
I really appreciate your time for making this video! I'm in the same predicament not wanting to buy a new one now I don't have to I'm going to build the one you just showed us
It wasn't a hard build but something I noticed after making 8is you can buy 3/4" cutting board I bet that would work even better , I appreciate you watching and commenting, the feed back really helps me brother
Cool board, needs a slot on one side to let water and slime to drain off the board, I have one that I use to clean fish and cut bait, mine doesn't have sides like yours does ! I can fix that now. Thank you . Keep them coming .
nice project and we use a lot of the UHMW plastic in our machine shop. I wanted to hand you a deburring tool, hehe. one thing for people to watch out for is sometimes its best to use a dull drill on plastic because a super sharp tool can "grab" in the soft stuff. great looking end results
Like the idea think I'll use the router make some channels for sides and back insetem half inch little bit silicone under and some screws should be good
Ronnie Carrasco thank you Sir I appreciate that more than you know brother , I enjoy making em , and I appreciate you watching and commenting. If you have something you want to see let me know I try and read all the comments and feed back is always welcome and helpful brother
@@FishinNStuff did you make those rod holders on your boat or did they come with the boat. I have a center console boat and was thinking of adding some rod holders to the sides of the console. Just wondering.
I made my rod holder bases the monster rod holders are mounted to ua-cam.com/video/gzPNhMPYrrg/v-deo.html But the other ones that I store my rods in kind of like the ones on a center console I bought on Amazon they are stainless steel
I really like the Grizzly boat line , and I love my little boat but I'm in the process of upgrading and decided to go with a SeaArk mainly because there live wells to be honest, my le boasts going to be a center console so I may be doing some videos based around that soon as I get it lol
I am making my own leaning post because SeaArt leaning posts just plain out suck and if you have a tracker you might find it interesting because tracker center consoles don't even have leaning posts
Found your video because I decided go buy some HDPE to build one myself and I was stuck choosing what to pick for a mount. I think I'm gonna keep looking for a rod holder mount or build one myself but definitely a great video
Something like this RAM MOUNTS (RAM-B-101U-CIP1 1" Diameter Ball Mount with 2/2.5" Round Bases That Contain The Amps Hole Pattern www.amazon.com/dp/B00JUW632S/ref=cm_sw_r_cp_apa_i_xf3WDbYV3NQVV
@@FishinNStuff That's actually exactly what I'm looking for in terms of the ball mount, thanks! Going to find a way to mount it to some aluminium pipe for the rod holder.
That's a good idea , you could use some pvc with a cap in the end abs and bolt it to the cap , you can even heat the pvc and press it in the rod holder so it's tighter
Good idea for cut bait and could actually be smaller for that.. It probably would need drain holes slots in the back of the board where it meets the backboard and a tilted mount to mount it in your rod holder where it could drain the goo overboard.
diy kayak cutting board would be awesome to see… i have a wilderness systems recon 120hd and trying to figure out how to build a cutting board to cut up bait on the gulf coast of florida!!
Another good video,I made my cutting board,too. a few years ago, should have made a video of it ,you can see it in some of my videos, I have it mounted on a seat post at the back, works real good, your will work good too.
I figured you have made away least one your a very crafty guy , it wasn't too hard to make but I can think of some things to improve it next time , thank you for commenting Mr Anthony
I appreciate that more than you know , I always tell my buddy only ppl that edit good notice good editing when they see it lol so back at ya lol . When I watch other ppl videos I'm paying more attention to the way they edited it , than the actual content , I learn allot watching other peoples work
Love the DIY projects. What ya got for a pontoon rod holder. What I have hangs from the bimmine top so they are somewhat protected from the Florida sun. Thanks for the videos.
Just made one myself and that cutting board plastic is some tough stuff to drill through but got it done now to figure out where to mount it on my little catfish boat
A cooking platform check I'll put that on my list of things to do haha , I appreciate it buddy , I got a favorable comment from the toughest critic haha
Thank you that means a lot coming from you , I appreciate you watching and commenting I love feed back so if you see anything you would change or something you'd like to see let me know
Maaaaaan that is AWESOME!!!! You going to having every man watching this out in the garage trying to make something lol .... Man i like that cutting boarding for real. Now let me go see what i have out here that i can mess up lol Fishin N Stuff
@@FishinNStuff man that's a blessing!!! I been out of town etc and its been raining and water levels up then down etc so I haven't gotten out as much but I do need to edit and put a video out but I'd rather be fishing lol man I cant wait to get out there this weekend..how did you do out there?
14 crappie 5 largemouth bass and 3 white perch and threw back 2 crappie that was too small , but we had fun , I think in another week or so they will be on fire , I love that spring bite
@@FishinNStuff 😯😯😯😯😯 man you killin it brother!!! Brother its raining yet again here so the water levels are all over the place so i cant go to some of the places i want to ... One of these days im going to visit NC ...we have only been there through the mountains of the Smokeys but not really really in NC.
I really appreciate you watching, that means a lot too me . I just try and help ppl plus I love too build stuff lol . This is the Link to where you can get a stick or if you want something special leave my wife a message and let her know ok www.etsy.com/shop/PebsPrettyfuls?ref=search_shop_redirect
Another way to secure the sides and back is to use liquid nails “Fuze It’s” it holds just about every thing and if you drill small holes in the the material it will even better hold and never rust!
Why did you make it so small? You should have used the old one to cut the sides in the back. A little sanding or a heat gun would have taken all the scratches out of it. Cut little rabbets out of the spare blocks so you have a place to slide your knife into. But make them length wise so the knife slides in and foreward. Make sure you cut a couple half round holes in the bottom of the backboard for drainage. In one of the corners drill two 1/2" holes about 2" apart then cut the middle out so you have a place for pliers or scissors. Looks good though
It's just a demo of what you can do , the video is for ideas not how it had to be done , I'll most likely make another one when my new boat arrives. Thinking of one for the track system
SK's CRAPPIE Catchn Adventures thanks brother , speaking of crappie lil that's where I'm headed now I love spring time crappie fishing , I appreciate man , I a take some of your pointers and go to work on em
Hey Keith, you did an Awesome job with that cutting board!!! When I was still driving big truck locally I useta get that cutting board. I believe it was piedmont plastics in Charlotte and another place in kings Mtn.. I actually give it all away 😃. Hey brother have a good one my friend. ☆Jay☆ 👍👍
Thank you brother, that physic is pretty expensive I've heard any way I would just buy a big cutting board off Amazon and use it personally. I always appreciate your comments buddy
Any edges that are not going to be in contact with a surface hit it with a router. Or if you just want a light curve lightly hit it with a heat gun or a torch but go easy.
I would but I work a lot already and UA-cam is like a second job lol I would rather make DIYs so people can save money and make they're own . I appreciate you commenting though brother it encourages me buddy
Built one for my minkota I pilot, used similar plastic 3/4 inch thick, used a hole saw to cut a hole the size of the shaft and screwed it to a flat piece to make a t beam the width of the gunwale then screwed it to the gunwale, next cut a small piece to cover the top of the t beam put 1 screw in one side so you can rotate it out of the way when you deploy. I'd add a pic but the boats in storage for winter.
LISTEN TO ME! 1:57, NEVER, EVER cross cut a short width board like that on a table saw. You are asking for trouble, huge possibility of the material binding. Get out the cross cut slider, set your fence 3/4" bigger that your final measurement will be, place a 3/4" spacer board against the fence or bigger. Set that block so that as soon as your material hits the blade it is no longer on the block against the fence, there's a void between the fence and the end of the wood. This way there is absolutely no way that the material can bind between the blade and the fence. Here's your instructional video on what I am talking about. ua-cam.com/video/JzYgcWJKquQ/v-deo.html
Your right there is a possibility of that happening , I've never had a problem cutting that plastic its so soft . But I have had that happen to me cutting plexiglass before , i appreciate you looking out for my safty brother. I'm going to watch it
@@FishinNStuff I'm retired now, but cut cabinetry parts for close to 35 years. I've seen some ugly stuff. Luckily I have all of my fingers intact. Your channel is awesome. I love your DIY video style. Keep them coming.
Well you'll be able to make a dang awesome cutting board with all that lol . I appreciate send me a picture of what you come out with man keiff32@hotmail.com
Rick Bokern i work in the construction trade doing fire sprinkler systems...they had pieces left over doing the stalls in the bathrooms...so i got a sheet
I think you should give it a try , I have to take my time and sure things look good because I'm doing it on camera , but let's face it... it's a cutting board , it'll have blood and guts all over it lol . You can do it brother . I appreciate you watching and commenting it's ppl like you that encourages me man . Send me a picture of it after your done via . Email or FB I've been collecting em of off other ppl might do a video one day of em
You could sell those so fast. Especially since you already have the tools. I’ve been looking at those bait boards as a gift for my son. He lives in st Mary’s GA. he fishes around Cumberland Island. Nice job on that board.
Thank you Sir , I get told that a lot but after I work all week , then I try and make a video every week . I just don't have a lot of time left . I appreciate you watching brother
You're DIY builds are top notch, some are better than the accessories being sold in the stores. You save us guys a lot of money, much appreciated bruddah..
Thank you , I appreciate the compliments , and I sure hope I help somebody lol , I like building stuff , and I appreciate you watching brother
I live in Winston Salem, NC. Every year from April thru August we have a city event called Bulky Item Pick Up. People can put just about anything on the curb during their week. We go around and pick up conduit, plastic pipe and all kinds of things. It is a DIY paradise. Enjoy your videos. Keep it up.
Thank you Sir, I'm the same way , I look at old stuff and new stuff thinking what could I do with that lol.
Only a true craftsman puts a cutting board on a drop cloth to prevent it from getting scratched too bad, Damn good job son. You are an inspiration for sure...
Great job, cool music too. The way you run your tools, you are a craftsman. Awesome....
Thank you brother and I appreciate you watching
You are a good man !
You have a bunch of great ideas ! I saw your video and I just ordered a big chunk of plastic off of Amazon and it will be here in a couple of days ,and my neighbor friend got a 1/4 by 20 tap set ,
I got a half inch rod that I am gonna drill and tap for a sis bolt and it fits in my oar lock just right !
I want to thank you again for your great ideas , for us people that ain’t got a lot of money .
Thank you Sir , I like helping people cause I've never had a bunch of money either
OUTSTANDING BROTHER!!!!! That looked every bit as professional as any of those $100+ cutting boards that are out there!!! Sure beats the two 3/4 pieces of plywood that POP and I use!!! That was outstanding!!
Thank you buddy , I'm looking forward ti seeing you and Pop again at the conference
@@FishinNStuff we've got our years license to fish both NC and SC waters, so you may see us sooner than you think brother!!!😂😂
Thanks to your video I made a custom cutting board for my boat. The total amount for materials, including a seat mount and side mounted organizer, was $150. The cutting station turned out fantastic and looks like a factory operation for my Lowe boat..
That's awesome man , hey you think you could send me a picture of it , I would love to see your work brother . My Email is on my about page if you ever need it . It's keiff32@hotmail.com
I really appreciate you watching buddy and if theres anything I can fo to help you out or anything you'd like to see I'll fo my best
You built yours for $150 when you can buy one cheaper??
Well I've watched four of your videos in a row, and I have to say I'm glad I found your channel.
Im glad you found my channel too brother lol , thanks for commenting, I love feed back good or back . I appreciate you watching
Thanks for the video. I made a slight modification some people might find useful. I used a heat gun and peices of wood to bend one of the sides in about an 1.5in by 5in in length. This "clean" outside of the board spot is where I drilled spots for a knife, pliers, and quick connect so I can hang the towel I wipe my hands with.
Just made me a fancier version that holds 2 drinks and 5 shot glasses for entertaining and cooking on the new swim platform .. I only used 1 1/4 long #6 screws lol
That's cool
Great project. Thanks for being so detailed in your descriptions, it's a great way to learn. Keep up the great work.
Thank you very much , I appreciate you commenting my friend
This is another great DIY👍🏻 one thing I would add is a small opening towards the back for the water to drain out when I spray the board with the hose. Thank you! Don't stop posting 👍🏻
I never added it because I want sure how I wanted to mount it
Great DIY, so helpful. This will save a lot of money for sure. These price for these in the marine stores is no joke!! Well done my friend!!
They sure ain't no joke , and the plastic is not cheap but it's not that high lol . I appreciate you watching brother
Will be making one here soon...thanks again for all the DIY products on your channel.
Hey thank you for watching brother , it wasn't too bad ti make , I think I would go with 3/4" next time
You the man brother. You did it again, another awesome project. Love all your DIY video's. Thanks for sharing 👊😎
Thank you Sir , you da man and I appreciate you watching and commenting, it's encouraging brother
Pretty work bud... Opened up my eyes to some cool ideas
Good that's what I make em for, I'm the same way when I watch other ppl work , my brain starts thinking of all kinds of stuff lol . Thanks for commenting brother
Wow, super nice! Turned out really well.
Thank you
Great idea. Looks nice too. I like the seat mount idea.
Thank you man not ideal for bass fishing but it would look great on your bad little bass buggy
I really appreciate your time for making this video! I'm in the same predicament not wanting to buy a new one now I don't have to I'm going to build the one you just showed us
It wasn't a hard build but something I noticed after making 8is you can buy 3/4" cutting board I bet that would work even better , I appreciate you watching and commenting, the feed back really helps me brother
Heck yeah buddy..That thing turned out great. A right professional job for sure. The only thing missing is a slot for the bait knife...👍👍
I started to put a bait knife holder , man I appreciate you watching brother
Cool board, needs a slot on one side to let water and slime to drain off the board, I have one that I use to clean fish and cut bait, mine doesn't have sides like yours does ! I can fix that now. Thank you .
Keep them coming .
nice project and we use a lot of the UHMW plastic in our machine shop. I wanted to hand you a deburring tool, hehe. one thing for people to watch out for is sometimes its best to use a dull drill on plastic because a super sharp tool can "grab" in the soft stuff. great looking end results
I use em at work to I just thought routering it would look good , I told you I never tried it before hahaha, it turned out alright for a first try lol
Awesome! I was searching for a DIY and found yours. Thanks
Thank you Sir. I'm glad you did
I made this today for my Boat. ( 20' Sea Ray Seville) it turned out AMAZING!! Thanks! Save me $$
Thank you for watching
Great job mate and G'day from Ozzie. Going to make one as soon as my new boat arrives!
Hey Mate G day , I appreciate you watching Sir . All the way from down under that's so cool 😎
How’s fishing down there?Greetings from up here in Alaska!
@@forresthenry9535 Plenty of fish here mate - trouble is catching the buggers! I am going to get to Alaska one day :-)
Dang Man! That looked store bought right there now!!!!!!!!!! Perfect!!!!!!!!!!!!!!!!!!!!!!!!!!!!
That thing is slick man! (I want an entire boat deck made out of that stuff. Kitchen counter too lol)
Lol might as well they make super bait tanks out of em lol man I appreciate you Stanley thanks for watching brother
@@FishinNStuff my pleasure man... you always have the best projects. I enjoy what you do sir!
The plastic is called STARBOARD
Good work you never disappoint you always have good videos
Thank you brother I appreciate that
Like the idea think I'll use the router make some channels for sides and back insetem half inch little bit silicone under and some screws should be good
Hey Keith I just emailed you some pics of my cutting board and homemade planer boards. Thanks for the ideas
Thanks man i'l put em on one of my video brother
I have a real issue with these videos.... I can't stop watching
*reel
Just what I was looking for. Thanks for sharing.
Another great video my friend, keep them coming.👍🇺🇸
Patriot Catfishers of AMERICA. Thank you James I appreciate it brother
As usual very nice job Kieth.
Thank you Glenn , I wanted to make something for the catfishermen
Haha, I noticed immediately that first sticker being crooked. My favorite DIY product so far!!!
nu SkooL Fishing yeah I tried to warm up to it but I can't deal with no crooked sticker haha
Sweet video. I need to build one for my cut baits.
Thank you Sir , appreciate it
Cracking bait table for a few quid and about a hours work cash saved is always good
Keep them comming brother
👍👍👍😜🏴🦄🎣😁🤞✌️
Good job. Should do one on mounting it to a cooler for the bank fishing fellas
That's not a bad idea , diys you see the rod holder video I did , those are nice for bank fishing
I really like that video, Hell I'm lying I like all your DIY videos. Keep up the great videos, we'll see you on the next one.
Ronnie Carrasco thank you Sir I appreciate that more than you know brother , I enjoy making em , and I appreciate you watching and commenting. If you have something you want to see let me know I try and read all the comments and feed back is always welcome and helpful brother
@@FishinNStuff did you make those rod holders on your boat or did they come with the boat. I have a center console boat and was thinking of adding some rod holders to the sides of the console. Just wondering.
I made my rod holder bases the monster rod holders are mounted to
ua-cam.com/video/gzPNhMPYrrg/v-deo.html
But the other ones that I store my rods in kind of like the ones on a center console I bought on Amazon they are stainless steel
I really like the Grizzly boat line , and I love my little boat but I'm in the process of upgrading and decided to go with a SeaArk mainly because there live wells to be honest, my le boasts going to be a center console so I may be doing some videos based around that soon as I get it lol
I am making my own leaning post because SeaArt leaning posts just plain out suck and if you have a tracker you might find it interesting because tracker center consoles don't even have leaning posts
Love the stuff u make bro,thanks again.u have inspired me tons.lets keep making fishing stuff.yeee haaa
Thank you brother and you guys watching inspires me just as much to work harder
Found your video because I decided go buy some HDPE to build one myself and I was stuck choosing what to pick for a mount. I think I'm gonna keep looking for a rod holder mount or build one myself but definitely a great video
Thank you Sir I appreciate it , for the cutting board, have you thought about using a ram ball mount , I personally think it would be awesome
Something like this
RAM MOUNTS (RAM-B-101U-CIP1 1" Diameter Ball Mount with 2/2.5" Round Bases That Contain The Amps Hole Pattern www.amazon.com/dp/B00JUW632S/ref=cm_sw_r_cp_apa_i_xf3WDbYV3NQVV
@@FishinNStuff That's actually exactly what I'm looking for in terms of the ball mount, thanks! Going to find a way to mount it to some aluminium pipe for the rod holder.
That's a good idea , you could use some pvc with a cap in the end abs and bolt it to the cap , you can even heat the pvc and press it in the rod holder so it's tighter
nice work there - I've tried to make different C-boards and they don't come close to this guy's table... outstanding job my man!!
Very Nice Job. You have all the tools available.
Now that's very cool, Looks sharp and professional to me!
Thank you brother , it wasn't too bad for my first attempt lol
Good idea for cut bait and could actually be smaller for that.. It probably would need drain holes slots in the back of the board where it meets the backboard and a tilted mount to mount it in your rod holder where it could drain the goo overboard.
I agree , that first version i made i mounted to a seat post so I didn't want a drain . But I made a cutting board mount video not too long ago
Like 28. Wow! you really did a great job my friend 👍👍👍👍 can't get better than that!
Thank you buddy for watching and commenting
diy kayak cutting board would be awesome to see… i have a wilderness systems recon 120hd and trying to figure out how to build a cutting board to cut up bait on the gulf coast of florida!!
Another good video,I made my cutting board,too. a few years ago, should have made a video of it ,you can see it in some of my videos, I have it mounted on a seat post at the back, works real good, your will work good too.
I figured you have made away least one your a very crafty guy , it wasn't too hard to make but I can think of some things to improve it next time , thank you for commenting Mr Anthony
You kill me with "click da bell" - LOL - Love this channel!
Lol
Dang man that turned out really nice! I like it! Good job man.
Thank you buddy I've never made one , I think I could do better next time , I appreciate you watching and commenting brother
@@FishinNStuff no problem man. Your getting pretty good at the editing too man!
I appreciate that more than you know , I always tell my buddy only ppl that edit good notice good editing when they see it lol so back at ya lol . When I watch other ppl videos I'm paying more attention to the way they edited it , than the actual content , I learn allot watching other peoples work
Love the DIY projects. What ya got for a pontoon rod holder. What I have hangs from the bimmine top so they are somewhat protected from the Florida sun. Thanks for the videos.
ua-cam.com/video/PNZqqNj1shI/v-deo.html
Just made one myself and that cutting board plastic is some tough stuff to drill through but got it done now to figure out where to mount it on my little catfish boat
An amazing DIY project. You need to make me a small cooking platform I can put in my kayak rod holder so I can fry up some burgers when I'm fishing.
A cooking platform check I'll put that on my list of things to do haha , I appreciate it buddy , I got a favorable comment from the toughest critic haha
Nice work, been thinking of a way to make my own
Thank you Sir, its not too hard
Great job on the cutting board!
Thank you that means a lot coming from you , I appreciate you watching and commenting I love feed back so if you see anything you would change or something you'd like to see let me know
Maaaaaan that is AWESOME!!!! You going to having every man watching this out in the garage trying to make something lol .... Man i like that cutting boarding for real. Now let me go see what i have out here that i can mess up lol Fishin N Stuff
Thank you Sir lol , man I'm just trying to make content half as awesome as you do brother . I went Crappie fishing last night a thought of you
@@FishinNStuff man that's a blessing!!! I been out of town etc and its been raining and water levels up then down etc so I haven't gotten out as much but I do need to edit and put a video out but I'd rather be fishing lol man I cant wait to get out there this weekend..how did you do out there?
14 crappie 5 largemouth bass and 3 white perch and threw back 2 crappie that was too small , but we had fun , I think in another week or so they will be on fire , I love that spring bite
@@FishinNStuff 😯😯😯😯😯 man you killin it brother!!! Brother its raining yet again here so the water levels are all over the place so i cant go to some of the places i want to ... One of these days im going to visit NC ...we have only been there through the mountains of the Smokeys but not really really in NC.
Great project!
Thank you Sir
Great video and awesome DIY tutorial!
Thank you Sir , I appreciate your feedback it always helps
Id love to get one of those fishin n stuff stencils
The link is in the Description box of that video
@@FishinNStuff i appreciate it ive been binge watching ur diy videos and about to buy material to do almost all of em they are awesome
I really appreciate you watching, that means a lot too me . I just try and help ppl plus I love too build stuff lol . This is the Link to where you can get a stick or if you want something special leave my wife a message and let her know ok
www.etsy.com/shop/PebsPrettyfuls?ref=search_shop_redirect
Another way to secure the sides and back is to use liquid nails “Fuze It’s” it holds just about every thing and if you drill small holes in the the material it will even better hold and never rust!
Nice DIY man. I will have to try making one sometime.
You can do it , it wasn't that bad . Hey man did you get you another boat yet
@@FishinNStuff no i didn't. Moving expenses took away from my boat fund 🙄
Thanks for putting on a new sticker, it was driving me crazy..😂
Lol 😆
Why did you make it so small? You should have used the old one to cut the sides in the back.
A little sanding or a heat gun would have taken all the scratches out of it.
Cut little rabbets out of the spare blocks so you have a place to slide your knife into. But make them length wise so the knife slides in and foreward. Make sure you cut a couple half round holes in the bottom of the backboard for drainage.
In one of the corners drill two 1/2" holes about 2" apart then cut the middle out so you have a place for pliers or scissors.
Looks good though
It's just a demo of what you can do , the video is for ideas not how it had to be done , I'll most likely make another one when my new boat arrives. Thinking of one for the track system
super stuff i must get my dad to try to make one
Sweet cutting board
Thank you Sir
Ur very welcome
Nice cutting board!
Backyard Custom Knives thank you brother I appreciate you watching
I'm jealous of all the tools he has! 😫
You'll get em it took Time to collect em
@@FishinNStuff lol I'm too old now! But i will go fishin with you! 😁
Good job. The only thing to make it better is to ditch the music. Thanks for sharing.
Thank you brother , did you not like that type music or you just a music hater , I'm serious by the easy I want ti know lol
He'll with that
🗣KEEP YOUR TUNES
great work
Thank you brother , it didn't turn out too bad at all , I appreciate you taking the time to watch buddy
Nice, Very Nice..... Very precise..... Articulate.....
SK's CRAPPIE Catchn Adventures thanks brother , speaking of crappie lil that's where I'm headed now I love spring time crappie fishing , I appreciate man , I a take some of your pointers and go to work on em
That’s looks good, nice job!
Thank you Sir I appreciate it brother
Looks good brother!
Thank you Sir I appreciate it, it turned out pretty good for a first try lol . There's a lot of ways you could make it
Nice, another great project. I hate when people cut bait on my cooler lol
Yeah depends on which cooler it is lol , everyone needs a good cutting board
That was awesome man perfect cutting board I like that thanks for sharing appreciate it💯👍🏽😊
I appreciate you watching and commenting as well brother .
Well done👍
Thank you Sir
Nice Job!
Captain Carpman
🤔
Hey Keith, you did an Awesome job with that cutting board!!! When I was still driving big truck locally I useta get that cutting board. I believe it was piedmont plastics in Charlotte and another place in kings Mtn.. I actually give it all away 😃. Hey brother have a good one my friend. ☆Jay☆ 👍👍
Thank you brother, that physic is pretty expensive I've heard any way I would just buy a big cutting board off Amazon and use it personally. I always appreciate your comments buddy
Thank you it’s a great idea I wanted to do one but I didn’t know how. 🤔
Thank you Sir
I noticed your steel table you were using at 4:01 to go over your Husky tool box, maybe you can do a small video on it as I really like it!!!
I think I talked about it on this video . I made it before I started UA-cam to weld on
ua-cam.com/video/LfLW9mC3shw/v-deo.html
A quick disconnect would be nice for dunking it to clean it off. Nice size though.
Very cool I wanted to make one using the knuckle of a microphone stand
That's a really good idea man I started to make a flush mount rod holder mount for it but went with the seat post instead
@@FishinNStuff seatpost is a great Idea
Thank you brother I love your idea , a ram ball mount would work good too
Any edges that are not going to be in contact with a surface hit it with a router. Or if you just want a light curve lightly hit it with a heat gun or a torch but go easy.
I used a similar method to make outriggers for my kayak
Good Idea
Thank you
Looks just like a finished one from the store
CPro Fishing With Wayne thank you brother, it turned out pretty good . And it wasn't that hard really, thanks for watching buddy
Great looking job. You might think about selling them. Just a thought.
I would but I work a lot already and UA-cam is like a second job lol I would rather make DIYs so people can save money and make they're own . I appreciate you commenting though brother it encourages me buddy
Great table 👍 now I need to make a bracket to hold my trolling motor steady going down the road or across the water. Any idea on that ?
Ive only seem em use the ram ball mounts for that , thank you for watching brother
Built one for my minkota I pilot, used similar plastic 3/4 inch thick, used a hole saw to cut a hole the size of the shaft and screwed it to a flat piece to make a t beam the width of the gunwale then screwed it to the gunwale, next cut a small piece to cover the top of the t beam put 1 screw in one side so you can rotate it out of the way when you deploy. I'd add a pic but the boats in storage for winter.
That sounds solid man , when you hey it out Email me a pic I'd love to see it
Robert Livingston I would like to see a picture of it too please
Thank you
LISTEN TO ME! 1:57, NEVER, EVER cross cut a short width board like that on a table saw. You are asking for trouble, huge possibility of the material binding. Get out the cross cut slider, set your fence 3/4" bigger that your final measurement will be, place a 3/4" spacer board against the fence or bigger. Set that block so that as soon as your material hits the blade it is no longer on the block against the fence, there's a void between the fence and the end of the wood. This way there is absolutely no way that the material can bind between the blade and the fence. Here's your instructional video on what I am talking about. ua-cam.com/video/JzYgcWJKquQ/v-deo.html
Your right there is a possibility of that happening , I've never had a problem cutting that plastic its so soft . But I have had that happen to me cutting plexiglass before , i appreciate you looking out for my safty brother. I'm going to watch it
@@FishinNStuff I'm retired now, but cut cabinetry parts for close to 35 years. I've seen some ugly stuff. Luckily I have all of my fingers intact. Your channel is awesome. I love your DIY video style. Keep them coming.
Thank you brother, I'm glad to pointed that out . Ive only had a problem once trying to cut plexiglass, but that about got ugly too lol
Nice!
Thank you Sir
well you make it look easy, with all thoes power tools
gary lutsky power tools make everything easier lol , but you could do it with hand tools I suppose . But who would want too lol
Ya know since I’ve met ya and started watching your videos I’ve bought stock in denatured alcohol 😂😂😂😂😂
Cool cutting board!!!!
Kentucky Catman outdoor adventures!! Well I was afraid acetone would melt the plastic lol thank you man
That right there is AWESOME and Pretty Dang Cool….I’m just sayin….
Great DIY.. I HAVE A 4’x8’ piece of this stuff...
Well you'll be able to make a dang awesome cutting board with all that lol . I appreciate send me a picture of what you come out with man keiff32@hotmail.com
Fishin N Stuff will do....
Where do you get the plastic ?
Rick Bokern i work in the construction trade doing fire sprinkler systems...they had pieces left over doing the stalls in the bathrooms...so i got a sheet
Fishin N Stuff hi love ur videos! On ur diy cutting board what size & type of screws did u use?
I made two for my boat thanks
I have been looking into building something like that. But my building skills are nowhere near yours. Nice clean build
I think you should give it a try , I have to take my time and sure things look good because I'm doing it on camera , but let's face it... it's a cutting board , it'll have blood and guts all over it lol . You can do it brother . I appreciate you watching and commenting it's ppl like you that encourages me man . Send me a picture of it after your done via . Email or FB I've been collecting em of off other ppl might do a video one day of em
The people who disliked this video aint a diy type person and have tons of money 🤣
Lol yep lol . Thank you brother
@@FishinNStuff i agree, cant stand no nothing loud mouths, i enjoy doing work on my boat. makes me feel good buddy
Sweet bro
Thank you Sir . I appreciate it
Genius.
Thank you Sir , I always look forward to your colorful comments , Genius lol you sure don't know me haha , I appreciate it brother
yep, turned out nice
Scotty Hill aka Catfishnfreak thank you Scotty I appreciate it brother
It needs one more lip 1/2 inch on the front just to keep everything from falling inside the boat.
That's not a bad idea at all
You could sell those so fast. Especially since you already have the tools. I’ve been looking at those bait boards as a gift for my son. He lives in st Mary’s GA. he fishes around Cumberland Island. Nice job on that board.
Thank you Sir , I get told that a lot but after I work all week , then I try and make a video every week . I just don't have a lot of time left . I appreciate you watching brother