How to replace RV LED Awning Light Strip-Do-It-Yourself
Вставка
- Опубліковано 3 сер 2024
- It never fails, a few of the lights have stopped working and its time to replace the LED awning light strip. Keystone RV's Master Technicians, Matt and Bart guide us through step-by-step instructions to replace it yourself.
00:00 Disclaimer
Always use caution when working on your RV. If you are uncomfortable, stop and schedule an appointment with a Keystone dealer. A professional service technician should work on safety-related items. Keystone RV is not responsible for damages or injuries that occur as a result of any of the information contained in this video.
00:43 IMPORTANT
-turn off the power to the light. Your safety is important to us!
01:04 Tools you will need on hand:
New LED Light Strip
Screw gun with #2 square bit
Shop Towels and rubber gloves
Putty Knife
Adhesive remover/Alcohol cleaner
Caulk gun and sealant
Wire Strippers, Wire Crimpers or pliers
Connectors
Ladder
01:11 Step by step guide on removing the existing LED light strip :
-Unroll the awning, remove the cover on the hardware to expose the wires.
-Remove the silicone sealant and pull out the wires from the wall
-Cut the two wires closest to the light strip, set aside for reference
-Slide the light out of the track
-Using the old light strip, measure against the new roll to determine the length needed, cut on the nearest line.
-Test the new lights before installing, using a 9 Volt battery or your 12 Volt RV Battery.
02:05 Inserting and connecting the new lights:
-Slide the new light back into the track
-Prepare the wires for reconnecting-cut back insulation about 5/16" to expose wires.
-Hook up the light, connect the wires with bell caps or butt connectors. Attach wires the same as how removed, use the old light to match up the colors.
-Once assembled, tuck the wires back up into the wall
-Reseal wires with sealant
-Attach the cover back to the awning hardware.
03:58 Now it is time to test the lights. Turn the power back on and try them out!
If you found this video helpful or have other suggestions for a video, please leave us a comment. Be sure to like and subscribe to our UA-cam channel for more RV Pro Tips and Do-It-Yourself content.
Thank you for watching!
KEEP UP WITH ALL THE LATEST PRODUCTS, INNOVATION & FUN FROM KEYSTONE!
LIKE & SUBSCRIBE TO OUR UA-cam CHANNEL
Visit our Website: www.keystonerv.com/
Like us on Facebook: / keystonerv
Follow us on Instagram: / keystonervcompany
#KeystoneRV #rv #campbetter #rvsolar #rving #camping #camper #fifthwheel #traveltrailer #toyhauler #rvlife #rvlifestyle
About Keystone RV Company
Keystone RV Company is the #1 manufacturer of towable RVs in North America and employs approximately 5,000 people in north central Indiana. Our company is focused on delivering superior product design, industry-leading innovation, built-to-last quality, and human-centered customer service. Keystone offers a wide range of award-winning RVs including single-axle minis, ultra-lightweight travel trailers, luxury travel trailers, fifth wheels, and toy haulers. Our brands include Montana, Montana High Country, Cougar, Alpine, Avalanche, Raptor, Carbon, Fuzion, Impact, Sprinter, Outback, Arcadia, Bullet, Passport, Springdale & Hideout.
Wow! Great stuff keystone! keep up the good work!!
Thank you! 🙂
Check the FUSE behind the light switch FIRST
Maybe you could have attached a thin twine to the old strip before you removed it. That would make pulling the replacement much easier.
Thank you for your feedback!
Good video, and I feel like I can do this myself. Now I just need to make sure to purchase the correct LED strip to fit in the channel. Suggestions on a resource to make sure I get the correct one? Thanks!
Good afternoon, and thank you for the feedback! You can visit any authorized Keystone RV dealership or you may go online to www.trekwood.com to see what would go with your unit specifically. Thank you.
Great video. For me the first 1.5’ feeds in without an issue but then it gets stuck. Any suggestions on feeding it through?
Exactly my question lol
What type of led strip do I need to get to fit in the track on a 2016 Keystone Hideout?
Great video. If you do another one please spend more time sliding the strip into the tube. I used the OEM /LCI product. With the help of silicone spray, it went nice till 1/2 way. I was tempted to install it from the rear and pull it in by the wires. I was hesitant because no one else dared to do it. (Nor mention it) What do you think about pulling on the wires.
Good morning and thank you for your comment. If you have questions or run into issues, please feel free to call our retail team at 1-866-425-4369 Monday - Friday. Thank you.
I watched this and first thing I thought was "it's easier to pull than push" when it comes to flexible material. I'll likely use soap as a lubricant so it can be easily washed away and superglue a string to the far end to pull it through.
Of course, this plan may change as I start doing things, but it's Plan A
Our lights are this type that slide in. All the replacement lights I've found are described with an adhesive backing. Do you know if they will work if the adhesive backing is not removed? Thanks.
Good morning, yes, they should still work in this instance. If you have questions or run into issues, please feel free to call our retail team at 1-866-425-43696 Monday - Friday. Thank you.
Do you also have video on how to use sealant around the windows.
Good morning, we do not, however that is a great video recommendation! UA-cam has quite a few videos from other owners, and dealerships on this. Thank you for your inquiry!
Off subject: I have a Cougar 29BHS and like all Cougars the cabinets above the bed swing up. (No Struts) I'd like to see a Keystone Designer/Engineer put their underwear and socks away neatly with one hand. It can't be done!!
What brand led light strip are you using?
We use the awning manufacturer's brand. If you are having issues with yours, and if you qualify for our DIY program, what we send you would be what was originally installed in production. If you are looking just to order a new one, you can order through any authorized dealership or through Trekwood online at www.trekwood.com. If you aren't sure if you qualify for the DIY program or not, please do reach out to our retail team at 1-866-425-4369, or visit us online at www.keystonerv.com. Thank you.
Where can I find the track for the LED mine broke 2020 Montana 3701LK
Good morning! Please do call our retail customer service team directly at 1-866-425-4369 so one of our advisors can assist you further on this! They are available Monday-Thursday 9am-5pm EST and Fridays 9am-4pm EST. Thank you.
Can you tell where you bought the led light at
Good Morning! You can purchase this from any local Keystone dealer or on www.trekwood.com.
Where did you get your LED lights?
Good Evening, you can purchase any LED lights like this from any local Keystone dealer near you or on www.trekwood.com.
'