KB Electronics KBPC Series DC Penta-Drive
Вставка
- Опубліковано 25 сер 2024
- The KBPC Series Penta-Drive from KB Electronics gives you reliable short circuit and transient protection, as well as overload protection, which helps prevent motor burnout and demagnetization of PM motors.
This rugged device has an acrylic coating and is made from die cast aluminum, making it corrosion resistant. All switches are rubber boot sealed, and there is a shaft seal with the main speed potentiometer, making this suitable for indoor and outdoor use for applications requiring wash down watertight durability.
Control can be operated through a jumper selection for both the speed and torque modes. Current range is also operated through jumper selection, so this helps eliminatehaving to calibrate IR compensation and current limit for most applications.
Other standard features of the KBPC include:
•Electronic start/stop
•Electronic overload protection
•LED indication display for “Power On” “Overload” and “Stop”
And it comes with trimpots allowing for parameter adjustment for such things as:
•Minimum Speed (MIN)
•Maximum Speed (MAX)
•Acceleration (ACCEL)
•Deceleration (DECEL)... and much more!
For more information on the KBPC-240D Penta-Drive NEMA-4X (IP-65) SCR DC Motor Speed and Torque Control from KB Electronics, visit us at motorsandcontrol.com
Shop Now!
motorsandcontr...
State Motor & Control Solutions, started in 1946, is under its third generation of family ownership and management. Specializing in electric motors, motor controls (starters, contactors, and relays) electrical clutches and brakes, electrical enclosures, belts, sheaves, chains, sprockets, gearboxes and mechanical power transmission equipment, also provides electrical motor repair and rewind services. State Motor & Control Solutions has field technicians, which are available to go out into the field and troubleshoot equipment that has failed, as well as in house technicians that are available for smaller projects. Lastly, State is known for assembling electrical control systems used to control various industrial processes. As a full service distributor, State Motor & Control Solutions carries product lines supplied by a wide array of companies. If you need it, we either have it in stock, or can get it for you.
With respect to the usage, installation or assembly of any products described in this video, State Motor & Control Solutions, a Missouri corporation, encourages you to follow the requirements and/or guidelines of: i) the Occupational Safety and Health Act of 1970, Public Law 91-596, as amended, and all laws, rules and regulations implemented in relation thereto; ii) the National Electric Code®; and iii) NFPA 70E®. Any installation, assembly or work described in this video should be performed by a qualified licensed electrician. State Motor & Control Solutions is registered and/or pending registered trademarks under the U.S. Patent and Trademark Office, assumed names, registered domain names, and/or trade names of State Motor & Control Solutions, a Missouri corporation.
LEGAL DISCLAIMER:
While we have made every attempt to ensure that the information provided is accurate and has been obtained from reliable sources, State Motor & Control Solutions is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information is provided “as is”, with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance, merchantability and fitness for a particular purpose. At all times you should defer to the instructions and safety guidelines issued by the manufacturer. In no event will State Motor & Control Solutions, its agents or employees thereof be liable to you or anyone else for any decision made or action taken in reliance on the information provided to you or for any consequential, special or similar damages, even if advised of the possibility of such damages.