@@ThisBGama Hey brother, how can I do those led lights that you just put on your Nissan maximum, I want some the same as those because they look cool at night, greetings and blessings.
Thank you for the Tutorial. This helped me big time because I was a bit confused. It’s getting warmer here in NY so I needed this cooler done for my maxima. Thank you!
I'd be curious to see a one year review video about the Acanii headlight assemblies with the LEDs. LEDs put off so much heat, and with that cap that come son the Acaniis, it had to have been hot inside the light housing. I have some Acaniis on order and cannot decide to do LEDs or HIDs. So, a review would help a lot of people out. js
That’s a good thing you kept that functional on the trans because that’s the transmission filter fam so everytime you do a cvt drain an fill you’re supposed to change that filter. Our cars filters are not inside the cvt like the Altima ones
Extra cvt cooler is the way to go but if you drive it hard and do rallys or backroads cruises a much bigger cooler is needed I'm in the process of getting a bigger one because I still get up to 200deg F + when I drive it hard
Thank you bro in your explanation regarding a transmission cooler as you know thru previous chat my maxima has over 218K😉😉😉😊😊😊. Your videos are 🔥🔥🔥🔥🔥🔥. Bless up yuhself bro
Love the channel bro! I have the Acanii headlights and wondering if I should get the h1 bulbs for the low beams and h7 bulbs for the height beams or just the h7 bulb only?
My man! Ya always on time. I was about to go head throw my max in tha shop and drop tha headlights in. But lemme order that led kit first haha..Mf man playboy!
The ttap that came wit the lights make for and easier installation you didn't have to run it to the fuse just connect to the parking light wire and that ground wire with the ttap good job doe💯
Nice vid Gama, keep up the Maxima content!! Like everyone says, this is super inspiring for my Max.. those headlights are a must have though. I gotta get me some 🔥🔥
Yo.. I just want to say I appreciate all your content and has given me a ton of ideas, I just want followers to know. If you have a maxima with the HID headlights the Acanii headlights will not work for you. I learned the hard way :-(. Gotta try to sell them I even did the AUKEE replacement bulb too :-). The Maxima has a Ballast plug instead of a H11 plug. Probably could cut and replace the ballast wires with H11, BUT I dont want to do that, not sure how much power in the wires.
Bro for the Alikee conversation kit with the new led. Did it come with the switch piece to swap from the H1 to the Alikee led.????????????? I want to order it but Amazon says it doesn’t fit. The adapter I see had to be glued but does it come inside the kit.????
@@ThisBGama thanks blessings from Arizona 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾. I was stuck what kind of glue did you use bye the way. Also vids are fire 🔥 👉🏾JUST SUBSCRIBED 👈🏾 ✊🏿
@@ThisBGama I had one more question hopefully you can help with this one too I ordered the H7 led by Alikee what about the H1 any suggestions on that swapping it out?
The flash mode or the actual taillights? The taillights came with the car and if you are referring to the lights flashing when i brake, I installed the brake light module to it
Yeah, I think it's the wire? I am using green and grey 16 to the clearance fuse. But they are dim. I connected it to the battery as well but same result. Should I try the red? and what size
The wire color doesn’t matter, try using different wire that’s maybe a little thicker. It’s need a to conductor at lest 12v of electricity which most wires do
Ahh yes Jack, welcome to the maxima club. I’ve had mine a few months and Gama has been the man for mods and helping out for ideas
aye bro i’m getting my maxima in a couple of weeks and your videos are inspiring me to build mine up. keep up the great content my boy
Thanks 🙏🏾. It means a lot and hope you do build it up
@@ThisBGama Hey brother, how can I do those led lights that you just put on your Nissan maximum, I want some the same as those because they look cool at night, greetings and blessings.
You have to buy the whole headlight
Thank you for the Tutorial. This helped me big time because I was a bit confused. It’s getting warmer here in NY so I needed this cooler done for my maxima. Thank you!
Glad it was helpful!
6:12 background music is fire. Nice addition
Got mine and I just got done after two days. Day one off and on rain and today just a lil cold but they in and H1 high beams next
All I need is one week of no rain to install some parts, good info on the transmission oil cooler I definitely need one 👍👌🎯
Definitely recommend it and your time will come
ummm... you were saying the stock transmission FILTER was the stock cooler..... good thing you kept it lol
FYI, you didn't have to unscrew the retaining clip off. All you had to do was unlatch it, replace the bulb, then latch it back.
heard
I got the hid maxima n I bought the full custom headlights, I hope I can get it to work
You can, just a little bit of wiring
I'd be curious to see a one year review video about the Acanii headlight assemblies with the LEDs. LEDs put off so much heat, and with that cap that come son the Acaniis, it had to have been hot inside the light housing.
I have some Acaniis on order and cannot decide to do LEDs or HIDs. So, a review would help a lot of people out. js
For sure
Loving the content! I've been working on my 2009 Maxima and these videos have been clutch. I think I'm about to order me some 🙌🏾
Bet. It’s lit
That’s a good thing you kept that functional on the trans because that’s the transmission filter fam so everytime you do a cvt drain an fill you’re supposed to change that filter. Our cars filters are not inside the cvt like the Altima ones
Yea
Extra cvt cooler is the way to go but if you drive it hard and do rallys or backroads cruises a much bigger cooler is needed I'm in the process of getting a bigger one because I still get up to 200deg F + when I drive it hard
I’ll look into that as well
Thank you bro in your explanation regarding a transmission cooler as you know thru previous chat my maxima has over 218K😉😉😉😊😊😊. Your videos are 🔥🔥🔥🔥🔥🔥. Bless up yuhself bro
You’re welcome and thanks 🙏🏾
Love the channel bro!
I have the Acanii headlights and wondering if I should get the h1 bulbs for the low beams and h7 bulbs for the height beams or just the h7 bulb only?
I don’t remember exactly what bulbs are for the high beams. If I remember the same factory bulb size works for the high beams
My man! Ya always on time. I was about to go head throw my max in tha shop and drop tha headlights in. But lemme order that led kit first haha..Mf man playboy!
Yessir!!!! Leh do it!
The ttap that came wit the lights make for and easier installation you didn't have to run it to the fuse just connect to the parking light wire and that ground wire with the ttap good job doe💯
Noted and thanks 🙏🏾
Could you show how you connected your lights mine didn’t come with t taps
Check out my LED conversion video, I showed how I wired it up.
I definitely don't drive spirited enough for a transmission cooler but this is dope info thanks bro.
Ye man, I still recommend it to prolong the life of the CVT
Believe me you still want one. That’s one of the main reason the Nissan cvt goes out is because of the heat they produce.
What glue did you use to make the trim for the light to stay
Super glue. But it’s not needed
Lookin good bro 🔥point the LEDs at 9 & 3 (like on a clock) and you should have a pretty even beam pattern.
Just need some switchback turn signals now
Thanks and I’ll look into it
Nice vid Gama, keep up the Maxima content!! Like everyone says, this is super inspiring for my Max.. those headlights are a must have though. I gotta get me some 🔥🔥
Please do, I can’t be the only one. I need maxima’s to make a comeback!
Can you make an installation video or a how to on the oil catch can , my max is burning oil , I think that catch can will help ,thanks brother
I’ll try
@@ThisBGama fr man this would be a good help
Will you have to take everything apart again to adjust headlights?
No, if you have a short screw driver and you remove your splash guard over the wheel you can reach the screw to adjust it
Looks amazing… quick question can you use the LED bar while the switch is on auto? Or you have to manually control your headlights.
It’s on on Auto as well
what cold air intake do you have I'm looking for one
I have a spectre Short air intake
Just subscribed love the vid keep it up bro
Thanks! Will do!
Sigh….. I can’t find these lights I been sold out on Amazon
Carid.com
Can someone please tell the song at 9:14 lol goes to hard. Love the video ❤️
I don’t remember
@@ThisBGama 180 by original keno 🤙👍
Hey it's me again can you make a video showing how to adjust those headlights to the point where you want it 2 point at so I can do mine
I can but I don’t know how soon that’ll be
Just did mine didn’t take long is it didn’t rain and wasn’t car. But they are now on. High beams next
Yessirn
Yo.. I just want to say I appreciate all your content and has given me a ton of ideas, I just want followers to know. If you have a maxima with the HID headlights the Acanii headlights will not work for you. I learned the hard way :-(. Gotta try to sell them I even did the AUKEE replacement bulb too :-). The Maxima has a Ballast plug instead of a H11 plug. Probably could cut and replace the ballast wires with H11, BUT I dont want to do that, not sure how much power in the wires.
Get h11 harness, tap into oem wires and you can pretty much install the headlights that way. No need to return or sell them.
you ever had a p0101 or u1000 code?
P0101 is MAF (Mass Air Flow) sensor or circuit range might be short. Clean the sensor or get a new one
@@ThisBGama cleaned it, didn’t work, so i got a new one, 2 days later the code came back 😭
That’s because even with a new one Nissan need to reprogram the computer to clear the code. MAF sensor is on the bulletin for that problem
@@ThisBGama so you can’t just clear it with a code eraser? it’ll just keep coming back?
Yup it’ll come right back
Hey what gauge wire did you use for the DRLs??
I’m definitely doing this to my maxima do your led headlights strip also flash when you put the turn signal.?
You should and no they don’t sadly but with some wiring it can
Hey how did you change the dash colors from amber to white?
I didn’t. The car comes like that
Where to get these headlights they sold out on Amazon
Try Carid.com
What lights can I get to replace the yellow bro
For the ACANII headlights, you need h7 bulbs
Bet appreciate you bro
Another banger video!
Thank ya 🤞🏾
Bro for the Alikee conversation kit with the new led. Did it come with the switch piece to swap from the H1 to the Alikee led.????????????? I want to order it but Amazon says it doesn’t fit. The adapter I see had to be glued but does it come inside the kit.????
Yes it come with it. As long as you use the link ai put in the description that’s it. Ignore the fact that it doesn’t fit the car
@@ThisBGama thanks blessings from Arizona 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾. I was stuck what kind of glue did you use bye the way. Also vids are fire 🔥 👉🏾JUST SUBSCRIBED 👈🏾 ✊🏿
I used super glue and thanks welcome to the fam
@@ThisBGama I had one more question hopefully you can help with this one too I ordered the H7 led by Alikee what about the H1 any suggestions on that swapping it out?
What h1?
I meant to ask ya B..I got spyder fog lights for my max to be install to...do think I need a conversion led kit for those as well?
As long as they are h11 you won’t. You’ll have to look at the description to make sure what harness it can attach to
And DM me a pic after install I want some figs with Halos
@@ThisBGama Yesssir playboy I Gotcha.👍👍👍
So when i order these, and put them on my max the light is gonna be halogen even on low beam?
no, its going to be LEDs
Where u get the brake lights from
The flash mode or the actual taillights? The taillights came with the car and if you are referring to the lights flashing when i brake, I installed the brake light module to it
Bro is that just a bulb or you did something to flash the lights?
I tried this set up but my DLR's are dim and aren't as bright as yours, could it be my wiring?
Are they both dim?
Yeah, I think it's the wire? I am using green and grey 16 to the clearance fuse. But they are dim. I connected it to the battery as well but same result. Should I try the red? and what size
The wire color doesn’t matter, try using different wire that’s maybe a little thicker. It’s need a to conductor at lest 12v of electricity which most wires do
I will try that, thanks man!
Finallyyyy bro.. how you like it so far? I didn’t take all that out with the screws I think 🤔 mine bolted up to the lights but now I wonder 💭 💭
Lol, yea I did a little extra and I’m loving them
Nice work man
Thanks a million
What's your exhaust setup
Resonator and muffler delete with 4 inch tips
Are the Spyder and Akanni exactly the same tho? Like quality wise? Because I know they are different price
Yes they are
Get the accani you'll save bout 200 plus get them faster carid taxing damn near $500
The price used to be 250, they got popular fast
Hey I just joined the maximum community and I'm looking for an exhaust that sounds exactly like yours would you mind me asking what it is
I didn’t get an exhaust system. I did a simple muffler and resonator delete. Check out my exhaust video for more details
@@ThisBGama ill definitely look for that thank u
How many mileage is ur Maxima when the tranny broke down?
187k
Looks fire bro ❤️
Thanks a million
What’s your job
Assistant Acount Manager for Valet
Whip sound so mean!!!
I was only 16 in a new coupe!!!!
🔥🔥dope gotta get them headlights
You won’t regret it
I’m pretty sure that’s a filter and not an oil cooler
👍🏾💯
🤞🏾🙏🏾
That’s not a transmission cooler…it’s a filter….def do not bypass that
🤘🤘💪💪
🙏🏾
🇴🇲👍👍👍🌹
body kit but clean your car pulish
I got a lot to do for real