Would have been nice if they had an option with the HID Xenon lights or if there was an easy way to integrate them with these. Otherwise they are gorgeous!
The tune will blow up your CVT, you need to get the 2015 wrx cvt cooler and get it installed first instructions on how's to you can find it on my 4dsc page
@@HorsepowerLabs so your using the adjuster on the headlights assembly or just moving the entire assembly up on your own? I'm just asking g cause I'm ordering si.ilar lights and don't want to have to adjust em. Rather they just be aiming the right height out the box.
Yeah you have 2 t-taps one is for + and the other -. So find that pos ang neg wire run the wires long side the lights wires and push the metal piece down to create the bond
I just bought these lights as well as the hid adapter to avoid tapping into the cables. What did you tap into for the DRL? Are the high beams and turning signals plug and play or did you have to modify the cables? Nice video by the way.
I’m so lost. They give you the t-taps and you have to bust the OEM harness open to expose the wires ? Or how are you connecting the headlights with what wire to the OEM headlight port?
What tool did you use to remove the bumper? I don’t know if you’re maxima had these weird screws that were very unique. More unique than the “star” shaped screws.
Peace and blessings bro , I kno it’s been years and you prolly don’t even have this car anymore lol , but when the DRL strips go out , is there a way to replace it ? My left side strip is completely out
Got the same headlights put on a few weeks ago , they make the car look good but the output of light sucks , I have HID’s on mine but since the lights are OEM projectors they kinda aim towards the ground so u can’t see anything ahead of u unless ur up close on it ... I had to get my fog lights done with hid’s as well just to see at night
Horsepower Labs the bulbs ? Or the actual projecter part ? Cuz I was able to adjust the bulb but it didn’t do much justice ... the actual projecter part I wasn’t able to move , it’s built into the frame of the headlight :-(
So does the tint effect the light a lot? I am debating between these and the original headlight assembly with a black housing because I don’t want the light projection to be poor with smoked outer lens tint. Do these come with clear tint? And can I add my own led light bulbs to these instead of halogen?
Manuel Lucero yea it’s clear lens the inside plastic is black so light won’t be affected . And yes you can add LED I believe which I’m doing just waiting to get a good set
I finally got these installed bro but my high beams are not as bright & my bulb from my old headlights didn’t fit into this one. Do you have a link or any suggestions as to which ones that I should get that would fit? Thanks
@@HorsepowerLabs Hi, I'm a sub, love your videos, quick question: I bought the Akkon version of these assemblies because they were the only one in stock but they come with the same instructions and are likely the same thing. I also have factory HID's and took it to mechanic for installation and showed him your video. He could not figure out how to get the high beams connected at all so now I have no high beams lol, how did you connect those?
@@watchQueenETV thank you I appreciate it. Yes it’s the same thing. Tbh all I did for every light was was tap into each one. So the high beams I think have its own connector just tap into that. Check and let me know if not I will try to get behind the lights and show you. You can always DM me @realgmaxine_
Deox yeah i ditched the ballast and bulbs since the bulb wouldn’t fit in the new housing and the didn’t brighten the road enough. So I want to do led. But you’ll see which kind
I order some for my 2014 maxima with sport package that has HID and they weren't compatible even got a conversion kit and still didn't work can you off any suggestions? Thanks
What’s up guys!! Just to let you know I put the link for the Custom Headlights in the description!! Thank You for the support 🙏
Could you help me find some? They’re sold out every where if you could find me some please send me the link!! Thank yoy
@@julianmurillo9200 I’ll check bro
@@HorsepowerLabs thanks dudee
How did u bypass the ballast??
@@drakusbeats5265 tapped into the wires before the ballast
Would have been nice if they had an option with the HID Xenon lights or if there was an easy way to integrate them with these. Otherwise they are gorgeous!
Strange World thank you
Damnnn!! That maxima looking mean now ! 🔥🔥 definitely getting these headlights for my maxima
Thanks bro and I have a link in the description for them bro
Finally... another 7th gen page. Subscribed!
Dr. J. The DIY Car Guy thank you!! I appreciate it.
this build is going to be sick
Dope video. Good job with the light install. It looks great!
kelz thank you.. now others see it can work with HID models
@@HorsepowerLabs Exactly! Which is a plus as it was never shown before until now.
Can’t wait to Get my maxima😍 new subscriber by the way 🤟🏽🤟🏽
Life With LB ayyy thank you
Good job bro
Thank you 😊
Max looking pretty 😍😍 keeping up wit it🔥
Queencity Auto styling thank you
That is a dope set.
these is clean brother
Thanks bro I appreciate it
Looks good!
Have you had any problems with them so far? Aren’t the high beams and low beams non replaceable bulbs?
You can replace the bulbs and no issues yet
Now just need the mirror lights replaced and you're Gucci haha
Yes that too lol
hey man, the maxima look good! Did you change the low beams headlight to LED'S?
Thank you and Yessir I did. I put a link to in in the description
@@HorsepowerLabs cool and thank you. Just ordered them
What wires did you tap into for the DAYTIME LED
Christopher Garcia I tapped into my parking lights that way I can turn it on and off
Horsepower Labs Thank you, will be getting mine in this coming week. Thanks
No videos show how you connect the green and black 2 wires
Yeah the lights look good thinking about getting this car a project car i love the shape of the Gen...... leave a link to the lights also
djbillgates thank you.. I left 2 links to the headlights!!
I can’t seem to find the link for the lights ??
Nvm I found them. Although they have the chrome ones they done seem to offer the black with clear lens. Guess I’ll just keep shoppin around
What type of wires did you use for the hid thing?
The tune will blow up your CVT, you need to get the 2015 wrx cvt cooler and get it installed first instructions on how's to you can find it on my 4dsc page
testosterone johny dumbbells I’m trying to get that too
Damn I’m getting them lights
Stuart Bernard they are amazing
Horsepower Labs keep up the good videos just subscribed 💯💯
Stuart Bernard thank you I appreciate it bro..
Hey man, great video honestly. Roughly how long did this whole thing take you to do if you remember?
Should take 1-2 hours depending on how fast you go. And you skill
I just got a 2011 and I love it. Now I want to do some mods to it. Keep the good quality videos coming.
Where did you get them?
I like the headlights. At least you don't ha e to adjust em to see the road at night. I'm assuming you just install em and your good to go?
Yeah I just installed and that’s it. Although I might raise them a bit idk just me 😆
@@HorsepowerLabs so your using the adjuster on the headlights assembly or just moving the entire assembly up on your own? I'm just asking g cause I'm ordering si.ilar lights and don't want to have to adjust em. Rather they just be aiming the right height out the box.
@@allenanalla2549 to me they were aiming the right height but it might just be I need to advise and retighten the assembly
Im so mad they didn’t make these for the factory Hid Maxima’s like mines
I have factory HID and run the lights
I don’t think I could swap my HID’s for that but it looks sick. I’m sure there is a way to wire it.
Yeah there is a way just tap into the cars headlights wire. You can also build your factory lights to look good
Niceee. If you have the parking lights on, can you use the fog lights also? Or you’ll have to switch the headlights fully on to use the fog lights?
I have to switch on my lights but that’s how I have it set up. You can set it up to run the DRL and parking lights with fog lights also.
Get a badass front splitter too
hey man ive been going crazy trying to figure out how to wire the drl with the t taps how do you connect the wire to the plug?
Yeah you have 2 t-taps one is for + and the other -. So find that pos ang neg wire run the wires long side the lights wires and push the metal piece down to create the bond
@@HorsepowerLabs thank you sm for answering bro i appreciate it
I just bought these lights as well as the hid adapter to avoid tapping into the cables. What did you tap into for the DRL? Are the high beams and turning signals plug and play or did you have to modify the cables? Nice video by the way.
Thank you. And those are plug and play. What hid adapter did you use? You have a link
@@HorsepowerLabs I used the link that somebody provided in the comments below. Through ebay
@@guissepenaranjo190 let me know how they work for you
@@guissepenaranjo190 update?
I’m so lost. They give you the t-taps and you have to bust the OEM harness open to expose the wires ? Or how are you connecting the headlights with what wire to the OEM headlight port?
They gave t-taps but not enough
Yes I’ve bn looking for them they run out fast
I believe they have some now
What tool did you use to remove the bumper? I don’t know if you’re maxima had these weird screws that were very unique. More unique than the “star” shaped screws.
Talking about the screws on 4:30
@@ItsFlips-jg3tr 4;30??
I just used screw driver and 10mm I think
🔥
Peace and blessings bro , I kno it’s been years and you prolly don’t even have this car anymore lol , but when the DRL strips go out , is there a way to replace it ? My left side strip is completely out
Blessings bro. I still have the car lol. It’s manual swapped now. Check out the new vids but have you tried checking the wire connections?
Got the same headlights put on a few weeks ago , they make the car look good but the output of light sucks , I have HID’s on mine but since the lights are OEM projectors they kinda aim towards the ground so u can’t see anything ahead of u unless ur up close on it ... I had to get my fog lights done with hid’s as well just to see at night
Johnny cashh you can adjust the headlights to aim up some more
Horsepower Labs the bulbs ? Or the actual projecter part ? Cuz I was able to adjust the bulb but it didn’t do much justice ... the actual projecter part I wasn’t able to move , it’s built into the frame of the headlight :-(
Johnny cashh you can adjust the projector. There is a screw looking thing on both sides
So does the tint effect the light a lot? I am debating between these and the original headlight assembly with a black housing because I don’t want the light projection to be poor with smoked outer lens tint. Do these come with clear tint? And can I add my own led light bulbs to these instead of halogen?
Manuel Lucero yea it’s clear lens the inside plastic is black so light won’t be affected . And yes you can add LED I believe which I’m doing just waiting to get a good set
Do the daytime running lights run off the the main headlight switch in the car or I have to build a switch
It’s connected to my lights so when I turn them on it turns on too
How would you adjust those headlights? Mine one side is higher then the other one
Ever Reynoso there is a silver screw behind it it can be adjusted there
Where do you get those instructions? Ours came with shit black and white non detailed intructions
Came in the box
If i didnt want to cut into the wires could i just order a adapter for it?
You could I believe there is an adapter out there, I didn’t know that at the time
Can you change the actual headlight bulb ?
Yes you can and I did.. I have a video of me changing the bulb to LED
What LEDs fit for the high and low? Is it H11 and 9007?
I have a link to it in the description. I think it is H11
Hey who did you conncet the t-taps to make the DRL work.?
How*
You put both wires through the t-tap and the inside would make a cut and connect them
I finally got these installed bro but my high beams are not as bright & my bulb from my old headlights didn’t fit into this one. Do you have a link or any suggestions as to which ones that I should get that would fit? Thanks
I’d say look up the bulbs size for the lights (might be in the item description) and search Led high beams.
@@HorsepowerLabs Hi, I'm a sub, love your videos, quick question: I bought the Akkon version of these assemblies because they were the only one in stock but they come with the same instructions and are likely the same thing. I also have factory HID's and took it to mechanic for installation and showed him your video. He could not figure out how to get the high beams connected at all so now I have no high beams lol, how did you connect those?
@@watchQueenETV thank you I appreciate it. Yes it’s the same thing. Tbh all I did for every light was was tap into each one. So the high beams I think have its own connector just tap into that. Check and let me know if not I will try to get behind the lights and show you. You can always DM me @realgmaxine_
The link you put for he LED Lights doesn't fir the 7th Gen Max
It’s for the aftermarket headlights. Like the one I have on. Not the OEM
Wait. So how did you tap into the ballast to basically convert it to halogen?
Deox i didn’t tap into the ballast. I went to halogen because I am going to LED soon.
@@HorsepowerLabs ahhhh so is it like....you changed the cable kind of?
Got rid of the harness for the ballast n what not?
Deox yeah i ditched the ballast and bulbs since the bulb wouldn’t fit in the new housing and the didn’t brighten the road enough. So I want to do led. But you’ll see which kind
@@HorsepowerLabs I see, I guess ill send these back and stick with my hids, but yeah I also plan on switching to leds for the fog and high beams
Deox check the comments here there is someone who who knows of an adapter to make your HID work with them.
Have you experienced any condensation?
No condensation. And I used the T-Tap included to tap into the lights
Hey bro, how did manage to bypass the hid connectors to led?
I tapped into the hid wires to get power to them
@@HorsepowerLabs what connectors did you use
@@TheSupreme111 you can use t-taps
I order some for my 2014 maxima with sport package that has HID and they weren't compatible even got a conversion kit and still didn't work can you off any suggestions? Thanks
Ms Sheila you can open both lights up and transfer hid wiring into the new ones. Or instead of the connectors tap into the wires like I did.
@@HorsepowerLabs is there no plug and play HID/LED kit for these headlights
I’m having the same problem it’s not compatible wit xenon hids so what easy method to use or get ???
I wonder if you could do halos with this 🤔
You probably could and that would be cool 😎
Dude add the leds to match the day time light
I did video coming soon
Do they make custom headlights for a 3018 altima?
Im sure someone makes them for 2018 but idk if this brand does
Thanks
Were u able to get rid of the low quality halogens???
Yes I run LED
@@HorsepowerLabs how? My headlights came with some weird light bulbs
@@HorsepowerLabs how did u convert those weird halogens to LED?? Sorry for bugging man
@@artm87ful I have a video showing how I did it and which bulbs I used. And the bulbs are in the description
Who’s the tuner that you spoken to?
Gawd Dre admin
Could’ve sworn he doesn’t tune Maximas with a CVT unless you’re doing a Swap
Gawd Dre was going with him but now I have a different one
I have a 2014 Maxima.. would these lights work?
Yes
Who’s the Max getting tuned by?
Stefflon Wan I have yet to decide I’ve been speaking with a few tuners. I’m going to post a video of getting it tuned
Horsepower Labs you definitely should. I’ve been looking for a tune myself. where are you located?
Stefflon Wan Im in Florida.
Wats the name of these headlights my bro
I think Akanii. I have a link to them in my description
How long does it take?
To out on it doesn’t take too long if it’s plug and play probably 2 hours give or take.
@@HorsepowerLabs
I have a 2014 Altima. I replaced my headlight assembly! Could I replace my halogen bulb with a hid or led?
@@tealx2014 yeah just look up the bulb size and search for HID or LED
@@HorsepowerLabs
Thanks!
are these plug and play?
Plug and play for the Halogen models. If you have HID you need to do some work to make them work
@@HorsepowerLabs how do i know which one i have 🤣
@@dallas3719 if they are yellow it’s halogen. If the lights are a bit blue they are HID
@@HorsepowerLabs well damn i’m colorblind lmao
okay well i found out i have HID, what all do i need to do? do you have a clear vid on that?
The sold out !😭
Nicholas Smith yeah I saw that!! They are getting popular
Do u know if and when they will be getting more in stock?
toyota is GARBAGE