Thank you for making the video, it made sense to me as a non tech person. I am new to rodin coil and spooky generators and trying to understand how to make them work together to help healing.
Interesting question and my answer is I am not absolutely sure that is the case. I do know that my evaluation is supported by others because in part it is from both friends and articles that I came to this conclusion. Something very interesting happens at the nodes as explained by Eric Dollard. When the waves are 180 degree out of phase the node transitions happen almost instantly. In other words faster than the speed of light. When the first node is bumped all the nodes along the wave form are 'bump response' instantly. Eric Dollard has a video demonstrating an example of this. Consider doing a little research to find this video. He does the demo with a rope. If you find the video you will understand what I'm saying. A claimed property of Scalar Waves is that they travel faster than the speed of light. Before you discredit this concept check out Albert Einstein's paper on 'Spooky Action at a Distance'.. Additionally, today's research in particle physics can now demonstrate this ability of remote electron spin can be detected over a vast distance faster than the speed of light. I sincerely hope this very lay explanation communicates well enough to give you some insight to Scalar Waves. One additional thing you might do is to investigate what "Standing Waves" are all about. They are related to "Scalar Wave" technology. Be well and respectfully, Steve
@@gskempe9 thank you, I've seen the Eric Dollard using the rope to explain standing waves. I've just heard making longitudinal scalar waves is much harder than just laying two coils 180 degrees out of phase on top of each other. I've heard photonic interferometry, plasmas, and dielectrics are needed to do this. Dan Winter talks all about this using Phi ratios and geometry, but it's still unclear to me. Just looking for more simplistic explanations. Much appreciation for the response!
Thanks for saying how many volts go Into a PEMF coil, I use around 200 volts to a Doctor Bob Beck magnetic pulser that I built and did Not want to go higher voltage than that
Much like you can run the Spooky Remote at many frequencies, including 7.83 Hz or the other earth resonant frequencies, you can create a standing wave at all these frequencies as well.
Ok Thanks for the reply, how much do you charge for a Bifilar Coil when you do have them in stock ?. Will be buying your Plasma Ball very soon, keep up the good work
Wow, your videos are very interesting! I know there are many uses for spooky which I have yet to understand. As of now I only know the basic uses for mine. I have been looking for aftermarket Doug coil which, I know is usually used with an amplifier, but it looks like you have an amplifier already utilized with this coil. Is this similar to the Doug Coil?
This Magnetic to Scalar Switch is used with a multifunction coil. The coil is a Bifilar Coil intended to be use as a pulsed delivery device in conjunction with the High Powered PEMF. It also is intended to be used as a magnetic wave or a scalar wave delivery device with or without an amplifier in conjunction with a Spooky. With an amplifier it is very similar to a Doug Coil but doesn’t have the same strength because it doesn’t run in a matched resonance mode as the Doug Coil does. The Doug Coil uses a capacitor bank to create coil resonance for a stronger output signal at a desired frequency. See the projects section on the www.aurorasky.net website for more information. Respectfully, Steve
One would think you are 100% correct except the nodes are never in perfect sync and those little blurps do something very strange. I scored 100% on my technician, general, and extra. I copy 22 wpm and that is how I got my license.
100 Amp pulse would cook you like a microwave chicken in under 30 seconds. 😂 I am curious as to your opinion on the health benefits of your Spooky signal generator and coil. Does it work as advertised?
I think you would have better results using a bi- filler pancake coil set like the ,master Ivo channel has started experimenting with, Constantine Myle has also could the scalar magnetic field you are looking for.
Hello, really informative video... it clears some things up for me. But I am unclear on how you made the coil that you are using to generate the scalar wave... I was under the impression that the bifilar coil was a pancake shaped coil that would be flat, but your coil is more like a ring... can you please clarify this for me? I'm super interested in scalar waves and free energy and healing technologies, but I am electrically challenged so to speak, so if you could explain this is even simpler terms (if that's even possible) then my tiny mind will appreciate it immensely! And I love your videos! Thank you
if the following is too many words... skip to the bottom ... look at the tesla coil (pancake), the toroidal coil he has is multi-row, the pancake is multilayered... "Just as the inertia of bodies tends to resist a change in the configuration of a material system, that is, to resist change of motion, so in electricity there is an opposition to the change of magnetic flux." ... (like current for ohm's law; rationalized as (T) tesla units regarding magnetism or an electromagnet)... look at the direction current is flowing in the coil (as it opposes in direction), given two coils wound proportionally or equally around the toroid (like two solenoids or helical coils) where one is wound clockwise and the other counter-clockwise... even in a monofilar, you can imagine this effect of current opposing direction when the loop (typically, the tap for ground or chassis) of the coil sends the conductor in the opposite direction of the first "lead"... (monofilar... like a single solenoid or strand of wire (in this case, wound like an electromagnet)... bifilar, like two separate solenoids or strands of wire (typically, of equal length) wound together and no loop in the center (like the pancake)... practically, two series coils (again... clockwise and counter-clockwise)...... simply, the monofilar (pancake), typically, has a loop or "curl around" in the center and the bifilar (pancake) has a wire that would extend out to the terminal (leads) for input or output depending on how the coil is used... bifilar usually has A input and B output and A to B tap for ground (loop on the outside of the coil)... the toroid is just (typically) cored and multi-row (maybe, even multilayered) vs the pancake, which is (typically) not cored and multilayered (can also be multi-row)... toroids are usually cored and wound with multi-row and pancakes (typically) don't have a core and are multilayered... mostly, toroids are intersecting with the circumference (around the circle) or rings around a ring and pancakes are wound "parallel" or with the curved "line" of the circle (if you were to imagine this 'two dimensionally' or, to say, like a circle drawn on paper) or rings within a ring... to wind a bifilar, take two even strands of wire and wind them around a toroid former and connect two of the four wires together on opposite ends (then you have two series coils) or fold a single wire and wind it around the toroid (snip the loop and connect A wire to B wire on opposite ends), or, simply search youtube or google for this instruction
said... nicholas cauhlen coil (transformer, cylindrical (solenoid)) cored stubbleield coil (cylindrical) more capacitive and 'solenoidal' (especially, when wet) and cored tesla (pancake or funnel) coil (cylindrical and helical), typically, a helix coil with no core or more mathematical/integral type coils (coils that are a little more complex)... said... magrav coil (toroidal or toroids within toroids) more capacitive and processed to anodize or rosin... air coils with smaller air coils as the core rodin coil (toroidal) typically air coil and (i think) the bhargava coil (which really, more explicitly, gives the nature of the flywheel-like effect and resonance with telluric crystal power)... typically, two funnel coils facing one another (only, all one coil or single wire with no end points (a loop) and is an air coil) and tapped into directly or magnetically or capacitvely... etc... coils (of about any type or any of these types) can be wound in a fashion of monofilar, bifilar, trifilar, quadrifilar (etc...)... even, monofilar, bifilar, trifilar, quadrifilar (etc...) with any of these combinations/fashions within or around the exterior of the inner coil
bifilar coils are on a flat plane coiling from center outward creating a spiral I believe the coil here is called a rodin coil which I've seen used in power suppliesscaler waves will be produced on a true bifiler
You are mixing up concepts and names and confusing the word bifilar with a style of coil. Bifilar simply refers to two windings together, or side by side. A Rodin Coil, a Pancake Coil, an Abha Coil, and a dozen other coil types can often be a single wire winding or a multiple wire windings. The Bifilar coil in this video consist of two windings side by side wound on a 6.5” form for roughly 175’ length of 12 gauge wire and 175’ length of 1`8 gauge wire. It is just a simple coil, bifilar wound.
Antiphase signals will cancel current flow, so the total energy into the system is noticable reduced. Apart from normal circuit losses and switching losses there is no generation of any other energy. For one, achieving a 'perfect' antiphase signal is difficult in itself due to the switching characteristic of the transistor output devices not being perfectly matched. Then each lead will have different inductance and capacitance. Perhaps you should measure the current flow in the circuit to see how it's reduced when opposite potentials are driving each other.
I went around on this once before with someone. The best way to test or show what is being talked about is look at the very simple circuit for the little black box called a Magnetic to Scalar switch shown in the video. The schematic is found here; www.aurorasky.net/Bifilar_Magnetic_to_Scalar_Switch_Schematic.pdf There is no switch transistor or transistors involved in this scheme. I used the box with the Frequency Converter, another website project, and passed amps of current through the current limiting resistor. Although I made plenty of mistakes in my lifetime I will not go into another round of debate over this subject on the internet. If you want to talk about this further you are welcome to email me via the website link. Respectfully, Steve
Maybe if you went to a school and read a book that said it will. My view on it is that losses are reduced. Amps do not tell you how powerful something is, but it tells you how much energy is wasted. Good example is Geard Morin's hyperdrive engine that works mostly on volts
I suspect you enjoy bestiality and country music. Doesn't make it true though. There are very few experts in electronics, but there are a lot of people who just repeat what they are being told. The stuff we are being told in schools are lies and something we are not told at all.
veli pekka Jutila What the fuck are you talking about you stupid imbecile. Grow up, get an education and stay away from subjects that you clearly know fuck all about.
I think this is demonstration of wave canceling standing wave not scalar wave. Just like microwave oven has cold spots that cancel and fails to warm your food consistently. That is the reason for turntable microwaves. Scalar wave is an impulse shock wave will look a like spike on the scope, able to penetrate most objects and metals and travels at c*pie/2 speed. Holding on to there energy to a much farther distance due to the penetration ability. Hard to receive because they just penetrate your equipment. Only a circuit that can resonate with the scalar wave frequency can receive it. Design receiver with 1/4 wave length but use c*pie/2 as speed. You need to feed the transmit coil with a nano second pulse and give it feed back to trigger itself into resonance also using a step up transformer. Then setup the receiver identically except step down. open your circuit to include the ionosphere and ground connection to achieve over unity. The ground is negative and the ionosphere is positive like a giant DC battery waiting to be tapped by the scalar waves. The regular hz waves dissipate too quickly and wont work in over unity. Imagine a large battery of infinite power on your table you can connect to one side ground but on the positive side you can only connect a capacitor. Capacitors become conductive at high frequency. As you begin to draw power you can attract lightning so be careful or you will create a discharge event especially in bad weather. Use only what power you need in nice weather if you get to greedy you attract a discharge and blow your equipment sky high with a lightning discharge of significant magnitude. Put up a dinky solar panel so noone asks questions where you get your power and your good to go.
Thank you. This is going to have me thinking for awhile. The video was inspired by the ‘Spooky Remote’ which is basically two coils configured to generate a standing wave regardless of the frequency being pumped in by the function generator. Resonance is not relevant to the way the ‘Spooky Remote’ works. The ‘Spooky Remote’ is a Radionics type device which the Bifilar coil duplicates on a much larger scale. Your explanation of a Scalar Wave is more in line with power generation verse a Radionics health type device. Your explanation is also very concise and if I understand it correctly you are giving away the farm with regards to an alternate energy source. Thank you very much for this blog. Respectfully, Steve
Hi Steve...I am trying to order a coil from you but cannot use Outlook. Can you please send me an email at pura.vida.moringa@gmail.com so that I can connect with you to order a coil. Thank you so much!
I do not publish email addresses on open forums or blogs. The website www.aurorasky.net offers a contact button by which to initiate an email link. Most browsers will display that link in the lower left hand of the browser page when the cursor scrolls over the blue contact link button found on the website. If clicking on the contact button doesn’t activate your email, then just copy and paste the address directly into your email program. Alternatively, press the secondary button while pointing to the contact button and a drop down window will offer a ‘Copy email address’ option which can then be manually placed in your email program. I hope this helps. Respectfully, Steve
Can you argument more, or indicate an updated resource on the topic? It's a giant mess looking around for informations, but hey, in recent times I'm grasping so many details, I'm truly beginning to believe in this whole argument SERIOUSLY.
superluminal (v > ~300,000,000 m/s) speeds are reached when radiator (coil/isotropic antenna and balun (balanced line)) is greater than the transmitter wavelength... velocity (v) = f (TXfrequency) * λ (wavelength of radiator)
Your resonant frequency of such a large cross sectional inside diameter would be WAY TOO LOW. I learned this, because of my tinkering with low carbon laminate steel for building the mini QEG. Because of your design..The core saturation would cause you irreparable problem before you could ever functionally obtain enough bemf to capture. For efficiency, design for a fat doughnut ..instead of a "wagon wheel".
The purpose of the coil is not to run in resonance, but to run in MAGNETIC Wave, SCALAR Wave, or PEMF mode. Wave mode is very low power and it is frequency that is the key to the various health modality effects. Books have been written on frequency and how basically everything in the universe has a frequency component. Absolutely fascinating science! PEMF mode works on a different principle and Pulse shape and strength are the key components, although frequency can play a role as well. There is weak PEMF and there is High Power PEMF. The 12 gauge winding of these Coils are intended to handle Pulses that exceed an electron flow rate in excess of 100 amps, albeit for less than a few milliseconds. Making Coils for the implementation of collecting or accumulating energy is a difference science outside the intent of this video and narrative. Respectfully, Steve
There is a lot of disagreement about what a scalar wave is and isn’t. The following is how I approached this subject matter. Several of the devices in the market claim a scalar wave is created when a standing wave of sine wave symmetry is generated with equal and opposite waves opposing one another and create standing wave nodes. The Spooky Remote is one such device that does this. The technique is rather simple and can be done with both magnetic and optical devices. When working with coils, reversing the winding direction midway through the coil winding will generate a standing wave where the magnetic field cancels itself between the nodes. This happens because of the nature of the magnetic wave direction is determined by current direction within a conductor. Yet at the same time current will flow through the complete coil and yet there will be no magnetic field detected. This is one reason you cannot go to your local electronic supply source and buy a scalar wave meter. The key to understanding what has been stated here is to understand what a standing wave is. There are lots of good resources for learning about standing waves. Example phet.colorado.edu/en/search?q=standing+wave The two winding of a bifilar coil can easily be connected with the two winding connected in series. Each wire has two ends and depending how the ends are connected will determine if the current direction changes at the midpoint connection. A picture is worth a thousand words. For the electrically inclined the schematic of the Magnetic to Scalar switch clearly shows how this done. www.aurorasky.net/Bifilar_Magnetic_to_Scalar_Switch_Schematic.pdf I sincerely hope this get you started with some basic information that will inspire you to look into the subject matter further. Be well and respectfully, Steve
gskempe9 So what about the claims that scalar waves permeate infinite distance and manage to walk through screened rooms. Does that match your own concept?
gskempe9 Your coil is creating magnetic fields...if they cancel themselves out you have lack of magnetic fields yet for some reason you want to conjure up the creation of a new field that can't even be detected. Bizarre. Oh, and standing waves can of course be detected... there are maxima and minima throughout the wavelength.
Actually the intent was to duplicate the Spooky Remote on a much larger scale. It is like having a Remote that is on steroids. The Spooky Remote works on the exact same principle as presented in this video. Another source of information that led me to believe a scalar wave is in the making is a video I watched by Eric Dollar. He likened the connections between the nodes of a scalar wave was like having a solid bar connecting the nodes together. Bump the front node and the node at the other end bumps immediately. Normal waves are limited by the speed of light. Scalar wave are claimed to be able to exceed the speed of light. So my answer comes from other sources and is not derived from doing experiments in a screened off room. There are several other devices that claim a similar requirement that a standing wave needs to be generated in order to produce a scalar wave. Radionic and several light devices come to mind. Do these devices work and are they truly generating scalar waves? I’ll let you be the judge of that.
Unfortunately the presentation was very weak with lots of missing/unclear information. As an electrical & electronic technologist I lost my interest after few minutes.
Fascinating. RIP, Sir Gordon. I'm still coming back to these videos years later. Am eyeing the new Spooky2 scalar system but that $1500 price tag...
I bought 2 Spooky 2 Scalars almost five years ago.
You get what you pay for and so far, it's wonderful.
Thank you. I have been looking how to do this and this is the simplest to understand video.
Thank you for making the video, it made sense to me as a non tech person. I am new to rodin coil and spooky generators and trying to understand how to make them work together to help healing.
Now it is working the website. Thank you.
Email sent regarding getting one of the coils. Are you still making and supplying them for the fee?
Just curious, how do you know that canceling out the magnetic field to zero creates a scalar field?
Interesting question and my answer is I am not absolutely sure that is the case. I do know that my evaluation is supported by others because in part it is from both friends and articles that I came to this conclusion. Something very interesting happens at the nodes as explained by Eric Dollard. When the waves are 180 degree out of phase the node transitions happen almost instantly. In other words faster than the speed of light. When the first node is bumped all the nodes along the wave form are 'bump response' instantly. Eric Dollard has a video demonstrating an example of this. Consider doing a little research to find this video. He does the demo with a rope. If you find the video you will understand what I'm saying. A claimed property of Scalar Waves is that they travel faster than the speed of light. Before you discredit this concept check out Albert Einstein's paper on 'Spooky Action at a Distance'.. Additionally, today's research in particle physics can now demonstrate this ability of remote electron spin can be detected over a vast distance faster than the speed of light. I sincerely hope this very lay explanation communicates well enough to give you some insight to Scalar Waves. One additional thing you might do is to investigate what "Standing Waves" are all about. They are related to "Scalar Wave" technology.
Be well and respectfully, Steve
@@gskempe9 thank you, I've seen the Eric Dollard using the rope to explain standing waves. I've just heard making longitudinal scalar waves is much harder than just laying two coils 180 degrees out of phase on top of each other. I've heard photonic interferometry, plasmas, and dielectrics are needed to do this. Dan Winter talks all about this using Phi ratios and geometry, but it's still unclear to me. Just looking for more simplistic explanations. Much appreciation for the response!
Thanks for saying how many volts go Into a PEMF coil, I use around 200 volts to a Doctor Bob Beck magnetic pulser that I built and did Not want to go higher voltage than that
Can you make a standing wave or scalar wave at the schumann frequency?
Much like you can run the Spooky Remote at many frequencies, including 7.83 Hz or the other earth resonant frequencies, you can create a standing wave at all these frequencies as well.
Hi, could you tell me were I could buy a Bifilar Coil like the one you are using ? Thanks
Normally have them but presently out of stock, in part because of what is going on with this planet.
Ok Thanks for the reply, how much do you charge for a Bifilar Coil when you do have them in stock ?. Will be buying your Plasma Ball very soon, keep up the good work
@@binaryego4621 www.aurorasky.net has a current ‘Order Information’ page at www.aurorasky.net/html/order_information.html
Thanks, brilliant website.
Wow, your videos are very interesting! I know there are many uses for spooky which I have yet to understand. As of now I only know the basic uses for mine. I have been looking for aftermarket Doug coil which, I know is usually used with an amplifier, but it looks like you have an amplifier already utilized with this coil. Is this similar to the Doug Coil?
This Magnetic to Scalar Switch is used with a multifunction coil. The coil is a Bifilar Coil intended to be use as a pulsed delivery device in conjunction with the High Powered PEMF. It also is intended to be used as a magnetic wave or a scalar wave delivery device with or without an amplifier in conjunction with a Spooky. With an amplifier it is very similar to a Doug Coil but doesn’t have the same strength because it doesn’t run in a matched resonance mode as the Doug Coil does. The Doug Coil uses a capacitor bank to create coil resonance for a stronger output signal at a desired frequency. See the projects section on the www.aurorasky.net website for more information. Respectfully, Steve
@@gskempe9 have u used this with a cap bank to chk the energy out via magnetic nd scalar wave using similar and dissimilar frequency as out puts
Are these wound to Rodin vortex mathematics?
Also could you use spooky boost with these ?
No and Yes!
Is there a way to transmit and receive these scalar waves without a ground connection using a bifilar coil?
I have not done any experiments to receive scalar waves so this question is beyond my experience level.
Respectfully, Steve
gskempe9 thanks
gskempe9 which bifilar coil did you use, the one designed by Tesla or the other?
(Thumbnail of this video
m.ua-cam.com/video/Gs_Cowk0a24/v-deo.html)
Do you know of any methods of generating scalar wave beams?
Sorry I do not.
gskempe9 ok, thanks
Output power in Tesla or gauss?
Two outputs out of phase will simply put energy back into each generator. How the hell did you get your radio license?
One would think you are 100% correct except the nodes are never in perfect sync and those little blurps do something very strange. I scored 100% on my technician, general, and extra. I copy 22 wpm and that is how I got my license.
100 Amp pulse would cook you like a microwave chicken in under 30 seconds. 😂 I am curious as to your opinion on the health benefits of your Spooky signal generator and coil. Does it work as advertised?
I think you would have better results using a bi- filler pancake coil set like the ,master Ivo channel has started experimenting with, Constantine Myle has also could the scalar magnetic field you are looking for.
You could be right on target. I follow them both although Myle is not as current as Ivo.
Hello, really informative video... it clears some things up for me. But I am unclear on how you made the coil that you are using to generate the scalar wave... I was under the impression that the bifilar coil was a pancake shaped coil that would be flat, but your coil is more like a ring... can you please clarify this for me? I'm super interested in scalar waves and free energy and healing technologies, but I am electrically challenged so to speak, so if you could explain this is even simpler terms (if that's even possible) then my tiny mind will appreciate it immensely! And I love your videos! Thank you
if the following is too many words... skip to the bottom ... look at the tesla coil (pancake), the toroidal coil he has is multi-row, the pancake is multilayered... "Just as the inertia of bodies tends to resist a change in the configuration of a material system, that is, to resist change of motion, so in electricity there is an opposition to the change of magnetic flux." ... (like current for ohm's law; rationalized as (T) tesla units regarding magnetism or an electromagnet)... look at the direction current is flowing in the coil (as it opposes in direction), given two coils wound proportionally or equally around the toroid (like two solenoids or helical coils) where one is wound clockwise and the other counter-clockwise... even in a monofilar, you can imagine this effect of current opposing direction when the loop (typically, the tap for ground or chassis) of the coil sends the conductor in the opposite direction of the first "lead"... (monofilar... like a single solenoid or strand of wire (in this case, wound like an electromagnet)... bifilar, like two separate solenoids or strands of wire (typically, of equal length) wound together and no loop in the center (like the pancake)... practically, two series coils (again... clockwise and counter-clockwise)...... simply, the monofilar (pancake), typically, has a loop or "curl around" in the center and the bifilar (pancake) has a wire that would extend out to the terminal (leads) for input or output depending on how the coil is used... bifilar usually has A input and B output and A to B tap for ground (loop on the outside of the coil)... the toroid is just (typically) cored and multi-row (maybe, even multilayered) vs the pancake, which is (typically) not cored and multilayered (can also be multi-row)...
toroids are usually cored and wound with multi-row and pancakes (typically) don't have a core and are multilayered... mostly, toroids are intersecting with the circumference (around the circle) or rings around a ring and pancakes are wound "parallel" or with the curved "line" of the circle (if you were to imagine this 'two dimensionally' or, to say, like a circle drawn on paper) or rings within a ring... to wind a bifilar, take two even strands of wire and wind them around a toroid former and connect two of the four wires together on opposite ends (then you have two series coils) or fold a single wire and wind it around the toroid (snip the loop and connect A wire to B wire on opposite ends), or, simply search youtube or google for this instruction
said...
nicholas cauhlen coil (transformer, cylindrical (solenoid)) cored
stubbleield coil (cylindrical) more capacitive and 'solenoidal' (especially, when wet) and cored
tesla (pancake or funnel) coil (cylindrical and helical), typically, a helix coil with no core
or more mathematical/integral type coils (coils that are a little more complex)...
said...
magrav coil (toroidal or toroids within toroids) more capacitive and processed to anodize or rosin... air coils with smaller air coils as the core
rodin coil (toroidal) typically air coil
and (i think) the bhargava coil (which really, more explicitly, gives the nature of the flywheel-like effect and resonance with telluric crystal power)... typically, two funnel coils facing one another (only, all one coil or single wire with no end points (a loop) and is an air coil) and tapped into directly or magnetically or capacitvely... etc...
coils (of about any type or any of these types) can be wound in a fashion of monofilar, bifilar, trifilar, quadrifilar (etc...)... even, monofilar, bifilar, trifilar, quadrifilar (etc...) with any of these combinations/fashions within or around the exterior of the inner coil
@@xeno8555 well put and informative.
I think the flat pan cake coil wok's best for this, master Ivo has a good searies on this, look up his channel
@@xeno8555 what is the name of the coil used to measure the scalar wave (smaller coil in the centre of bifilar coil)? How to make it?
bifilar coils are on a flat plane coiling from center outward creating a spiral I believe the coil here is called a rodin coil which I've seen used in power suppliesscaler waves will be produced on a true bifiler
You are mixing up concepts and names and confusing the word bifilar with a style of coil. Bifilar simply refers to two windings together, or side by side. A Rodin Coil, a Pancake Coil, an Abha Coil, and a dozen other coil types can often be a single wire winding or a multiple wire windings. The Bifilar coil in this video consist of two windings side by side wound on a 6.5” form for roughly 175’ length of 12 gauge wire and 175’ length of 1`8 gauge wire. It is just a simple coil, bifilar wound.
how to make Bifilar Coil and Connections please teach Us.
Old information page follows;
www.aurorasky.net/html/bifilar_mag_coil.html
How much???
Antiphase signals will cancel current flow, so the total energy into the system is noticable reduced. Apart from normal circuit losses and switching losses there is no generation of any other energy. For one, achieving a 'perfect' antiphase signal is difficult in itself due to the switching characteristic of the transistor output devices not being perfectly matched. Then each lead will have different inductance and capacitance.
Perhaps you should measure the current flow in the circuit to see how it's reduced when opposite potentials are driving each other.
I went around on this once before with someone. The best way to test or show what is being talked about is look at the very simple circuit for the little black box called a Magnetic to Scalar switch shown in the video. The schematic is found here; www.aurorasky.net/Bifilar_Magnetic_to_Scalar_Switch_Schematic.pdf
There is no switch transistor or transistors involved in this scheme. I used the box with the Frequency Converter, another website project, and passed amps of current through the current limiting resistor. Although I made plenty of mistakes in my lifetime I will not go into another round of debate over this subject on the internet. If you want to talk about this further you are welcome to email me via the website link. Respectfully, Steve
Maybe if you went to a school and read a book that said it will. My view on it is that losses are reduced. Amps do not tell you how powerful something is, but it tells you how much energy is wasted. Good example is Geard Morin's hyperdrive engine that works mostly on volts
veli pekka Jutila I suppose you're an expert in electronics? G Morin is a fool and complete idiot. I suspect the same of you.
I suspect you enjoy bestiality and country music. Doesn't make it true though. There are very few experts in electronics, but there are a lot of people who just repeat what they are being told. The stuff we are being told in schools are lies and something we are not told at all.
veli pekka Jutila What the fuck are you talking about you stupid imbecile. Grow up, get an education and stay away from subjects that you clearly know fuck all about.
I think this is demonstration of wave canceling standing wave not scalar wave. Just like microwave oven has cold spots that cancel and fails to warm your food consistently. That is the reason for turntable microwaves.
Scalar wave is an impulse shock wave will look a like spike on the scope, able to penetrate most objects and metals and travels at c*pie/2 speed. Holding on to there energy to a much farther distance due to the penetration ability. Hard to receive because they just penetrate your equipment. Only a circuit that can resonate with the scalar wave frequency can receive it. Design receiver with 1/4 wave length but use c*pie/2 as speed. You need to feed the transmit coil with a nano second pulse and give it feed back to trigger itself into resonance also using a step up transformer. Then setup the receiver identically except step down. open your circuit to include the ionosphere and ground connection to achieve over unity. The ground is negative and the ionosphere is positive like a giant DC battery waiting to be tapped by the scalar waves. The regular hz waves dissipate too quickly and wont work in over unity. Imagine a large battery of infinite power on your table you can connect to one side ground but on the positive side you can only connect a capacitor. Capacitors become conductive at high frequency. As you begin to draw power you can attract lightning so be careful or you will create a discharge event especially in bad weather. Use only what power you need in nice weather if you get to greedy you attract a discharge and blow your equipment sky high with a lightning discharge of significant magnitude. Put up a dinky solar panel so noone asks questions where you get your power and your good to go.
Thank you. This is going to have me thinking for awhile. The video was inspired by the ‘Spooky Remote’ which is basically two coils configured to generate a standing wave regardless of the frequency being pumped in by the function generator. Resonance is not relevant to the way the ‘Spooky Remote’ works. The ‘Spooky Remote’ is a Radionics type device which the Bifilar coil duplicates on a much larger scale.
Your explanation of a Scalar Wave is more in line with power generation verse a Radionics health type device. Your explanation is also very concise and if I understand it correctly you are giving away the farm with regards to an alternate energy source. Thank you very much for this blog. Respectfully, Steve
Hi Steve...I am trying to order a coil from you but cannot use Outlook. Can you please send me an email at pura.vida.moringa@gmail.com so that I can connect with you to order a coil. Thank you so much!
I do not publish email addresses on open forums or blogs. The website www.aurorasky.net offers a contact button by which to initiate an email link. Most browsers will display that link in the lower left hand of the browser page when the cursor scrolls over the blue contact link button found on the website. If clicking on the contact button doesn’t activate your email, then just copy and paste the address directly into your email program. Alternatively, press the secondary button while pointing to the contact button and a drop down window will offer a ‘Copy email address’ option which can then be manually placed in your email program. I hope this helps. Respectfully, Steve
Can you argument more, or indicate an updated resource on the topic? It's a giant mess looking around for informations, but hey, in recent times I'm grasping so many details, I'm truly beginning to believe in this whole argument SERIOUSLY.
superluminal (v > ~300,000,000 m/s) speeds are reached when radiator (coil/isotropic antenna and balun (balanced line)) is greater than the transmitter wavelength... velocity (v) = f (TXfrequency) * λ (wavelength of radiator)
www.aurorasky.net. This websid does not work.
Your resonant frequency of such a large cross sectional inside diameter would be WAY TOO LOW. I learned this, because of my tinkering with low carbon laminate steel for building the mini QEG. Because of your design..The core saturation would cause you irreparable problem before you could ever functionally obtain enough bemf to capture. For efficiency, design for a fat doughnut ..instead of a "wagon wheel".
The purpose of the coil is not to run in resonance, but to run in MAGNETIC Wave, SCALAR Wave, or PEMF mode. Wave mode is very low power and it is frequency that is the key to the various health modality effects. Books have been written on frequency and how basically everything in the universe has a frequency component. Absolutely fascinating science! PEMF mode works on a different principle and Pulse shape and strength are the key components, although frequency can play a role as well. There is weak PEMF and there is High Power PEMF. The 12 gauge winding of these Coils are intended to handle Pulses that exceed an electron flow rate in excess of 100 amps, albeit for less than a few milliseconds.
Making Coils for the implementation of collecting or accumulating energy is a difference science outside the intent of this video and narrative. Respectfully, Steve
How do you generate scalar waves?
There is a lot of disagreement about what a scalar wave is and isn’t. The following is how I approached this subject matter.
Several of the devices in the market claim a scalar wave is created when a standing wave of sine wave symmetry is generated with equal and opposite waves opposing one another and create standing wave nodes. The Spooky Remote is one such device that does this. The technique is rather simple and can be done with both magnetic and optical devices. When working with coils, reversing the winding direction midway through the coil winding will generate a standing wave where the magnetic field cancels itself between the nodes. This happens because of the nature of the magnetic wave direction is determined by current direction within a conductor. Yet at the same time current will flow through the complete coil and yet there will be no magnetic field detected. This is one reason you cannot go to your local electronic supply source and buy a scalar wave meter. The key to understanding what has been stated here is to understand what a standing wave is. There are lots of good resources for learning about standing waves. Example phet.colorado.edu/en/search?q=standing+wave
The two winding of a bifilar coil can easily be connected with the two winding connected in series. Each wire has two ends and depending how the ends are connected will determine if the current direction changes at the midpoint connection. A picture is worth a thousand words. For the electrically inclined the schematic of the Magnetic to Scalar switch clearly shows how this done.
www.aurorasky.net/Bifilar_Magnetic_to_Scalar_Switch_Schematic.pdf I sincerely hope this get you started with some basic information that will inspire you to look into the subject matter further. Be well and respectfully, Steve
Thanks
gskempe9 So what about the claims that scalar waves permeate infinite distance and manage to walk through screened rooms. Does that match your own concept?
gskempe9 Your coil is creating magnetic fields...if they cancel themselves out you have lack of magnetic fields yet for some reason you want to conjure up the creation of a new field that can't even be detected. Bizarre. Oh, and standing waves can of course be detected... there are maxima and minima throughout the wavelength.
Actually the intent was to duplicate the Spooky Remote on a much larger scale. It is like having a Remote that is on steroids. The Spooky Remote works on the exact same principle as presented in this video. Another source of information that led me to believe a scalar wave is in the making is a video I watched by Eric Dollar. He likened the connections between the nodes of a scalar wave was like having a solid bar connecting the nodes together. Bump the front node and the node at the other end bumps immediately. Normal waves are limited by the speed of light. Scalar wave are claimed to be able to exceed the speed of light.
So my answer comes from other sources and is not derived from doing experiments in a screened off room. There are several other devices that claim a similar requirement that a standing wave needs to be generated in order to produce a scalar wave. Radionic and several light devices come to mind. Do these devices work and are they truly generating scalar waves? I’ll let you be the judge of that.
You sure two overlapping signals do 2x? It should cancel each other out … I think you are looking at constructive interference …
Ok you explained more further in the video …
hmm i sorta got it
That's not a true Tesla bipolar coil.
???
Unfortunately the presentation was very weak with lots of missing/unclear information. As an electrical & electronic technologist I lost my interest after few minutes.
Master Ivo searies on this might be more clear.
Bla bla bla bla bla