Classic Mini: Radius Arm Bearings And Reaming
Вставка
- Опубліковано 21 жов 2024
- Here's my radius arm bearing replacement on a budget. Sorry it took so long to put up, I've just not had the time to edit it.
Also please check out Keith Millers channel as he does it with proper tools.
Hope this helps out a lot of you in saving them pennies.
Look out for my next video and please keep subscribing!
Thanks for watching!
Follow me and the cars on:
Instagram
@millieonameet
@blueeyedruby82
@_bd_photography_
Twitter:
@Daves_VLOG
Music by Epidemic Sound (www.epidemicsou...)
3 yrs after your video was uploaded.. way to go dude!!
Thanks for the shout, well done for getting it done with no workshop and limited tools!
Anytime dude, wouldn't have come up with the punch threw method if it wasnt for you great video 👍🏿
Great job very well explained 😊
Splendid job - thanks so much for this.
Good job Dave and great video!
Top job Dave
Thanks mate 😁
Great Video, worked a treat. Thanks for the advice.
Thanks dude 👍🏾
Just what I needed . That was brilliant, well done Dave
Thanks for you positive comments 😁
Good job but fasten the vice down ffs
Good vid and a great help to me.....thank
you
Thanks dude 😁 I'm glad my budget work videos are helping
Cheers for the guide much appreciated.
No problem dude 👍🏾
put some oil on the reamer as you are turning it makes the job easier and the finish on the bearing cleaner
I’ll be doing a video on mine shortly, much the same as yours tbh, the only difference is I’m having a shaft machined up which will thread onto the reamer to guide it through, much like Keith’s but slightly different. Nice work pal
Awsome dude I look forward to watching it mate. What's your plan for removing bearings?
Brown Dave much the same...socket and extension, failing that the trusty die grinder and a burring bit
Realy helpfull video top man
Thanks dude really appreciate nice comments like this 👍🏿
Hi bud im doing mine weekend not sure what way the brass bush goes in is it any way ?
Yeh bud they can go either way but check the bush for a chamfer on one side. I've seen some kits with a chamfer to help start the bush when winding it in. 👍🏿
If you can also leave the shaft in when knocking the bush out it'll obviously guide the bush through, probably best with the radius arm horizontal in the vice, tricky when the vice isn't bolted down though, been there and got the T-shirt.
Someone mentioned the same thing the other day but I'd want to grind the threaded bit off so it would sit in the socket better. I was too lazy and didn't want to grind the old pin😂Also sorry for my quick set up i got no workshop so my pop up bench and loose vice is the best I've got 😁 That ghetto life
@@browndave3144 The loose vice works fine....until it slips off the bench onto your foot! I guess that's what NHS is for. Be Careful Mate ;-)
what are the dimensions of the reamer?
Hello mate, it's a variable 25/32" to 27/32"
Brown Dave inc or mm ?
@@Gionnygarage inches m8
Brown Dave do you have a link where can i find it?
Brown Dave h9
good post but please dump the annoying music it is not needed at all... just why is it there