Did you make the board by yourself? If you did, can you please cover the detail video about creating the board, completely from the schematic, then PCB design, electrical properties, components selection, to real product? Nice vids btw, subbed!
Thank you! I did create the board from start to finish, currently, I have a video discussing some of the modifications I had to make which you can see here: ua-cam.com/video/yeCudN1a1Pg/v-deo.html. Also, be sure to check out my channel description, I have a GitHub where I posted the schematic, and I can start uploading the project as a whole for each video if needed. I was thinking about doing that, not for this particular project but for another one, it would have to be a multi-part series. I could do that for a large project I want to work on so stay tuned!
@@jboy6944 So manufacturing depends on the specific pcb company you go with, but I typically use JLCPCB, to get the three components soldered onto the board it cost me $52 in total (that’s including shipping and then I soldered the rest by hand which added another $25-30). These parts were also extended parts, meaning they cost more per unit. Getting low quantities of boards (less than 50) is unfortunately expensive, so I’d say if you can get the parts that you would struggle with soldered on and do the rest yourself it will cost quite less. I can definitely make a video covering that as it can be a rather tedious process if you don’t know/haven’t done it before.
Try this link: www.pdffiller.com/jsfiller-desk12/?requestHash=58624129aa9273c800601d9953384625085b1e9810d09e2aec10298bac5e0f49&projectId=1615807236&PAGE_REARRANGE_V2_MVP=true&richTextFormatting=true&isPageRearrangeV2MVP=true&jsf-page-rearrange-v2=true&jsf-redesign-full=true&act-notary-pro-integration=false&jsf-fake-edit-embedded=true&isSkipEditorLoadFrequency=true&jsf-desktop-ux-for-tablets=false&jsf-probability-70=true&jsf-socket-io=false&routeId=b409f15ea8211be1959949d772823b7d#387a62e8670e44fb9d107b84b47dcb09. I'd also recommend watching this video: ua-cam.com/video/yeCudN1a1Pg/v-deo.html, where I cover what changed from version 1 to version 2, though the one thing I'd recommend is to use an MCU with larger flash memory, 16KB can barely fit anything.
Did you make the board by yourself? If you did, can you please cover the detail video about creating the board, completely from the schematic, then PCB design, electrical properties, components selection, to real product? Nice vids btw, subbed!
Thank you! I did create the board from start to finish, currently, I have a video discussing some of the modifications I had to make which you can see here: ua-cam.com/video/yeCudN1a1Pg/v-deo.html. Also, be sure to check out my channel description, I have a GitHub where I posted the schematic, and I can start uploading the project as a whole for each video if needed.
I was thinking about doing that, not for this particular project but for another one, it would have to be a multi-part series. I could do that for a large project I want to work on so stay tuned!
@@DRELECTRONICS-mm5hb keep up the spirit, bro. you can do this!🔥🔥🔥🔥
Also how much did it cost to manufacture? Including all the components. And can you do a video of the ordering process please?
@@jboy6944 So manufacturing depends on the specific pcb company you go with, but I typically use JLCPCB, to get the three components soldered onto the board it cost me $52 in total (that’s including shipping and then I soldered the rest by hand which added another $25-30). These parts were also extended parts, meaning they cost more per unit.
Getting low quantities of boards (less than 50) is unfortunately expensive, so I’d say if you can get the parts that you would struggle with soldered on and do the rest yourself it will cost quite less. I can definitely make a video covering that as it can be a rather tedious process if you don’t know/haven’t done it before.
Bro why you such a boss?
@@jboy6944 Appreciate the support, trying my best to make good tutorials for topics I struggled with at first.
can i get the scematic?
Try this link: www.pdffiller.com/jsfiller-desk12/?requestHash=58624129aa9273c800601d9953384625085b1e9810d09e2aec10298bac5e0f49&projectId=1615807236&PAGE_REARRANGE_V2_MVP=true&richTextFormatting=true&isPageRearrangeV2MVP=true&jsf-page-rearrange-v2=true&jsf-redesign-full=true&act-notary-pro-integration=false&jsf-fake-edit-embedded=true&isSkipEditorLoadFrequency=true&jsf-desktop-ux-for-tablets=false&jsf-probability-70=true&jsf-socket-io=false&routeId=b409f15ea8211be1959949d772823b7d#387a62e8670e44fb9d107b84b47dcb09.
I'd also recommend watching this video: ua-cam.com/video/yeCudN1a1Pg/v-deo.html, where I cover what changed from version 1 to version 2, though the one thing I'd recommend is to use an MCU with larger flash memory, 16KB can barely fit anything.
@@DRELECTRONICS-mm5hb i can't access the link and the document
@@calvinaizumiramadhan2685 I'll have to create a GitHub then, I'll provide a link to it in my channel description later today.
@@calvinaizumiramadhan2685 Check the description of my channel, posted a link to my Github where you'll find the schematic.
@@DRELECTRONICS-mm5hb Thanks Bro, it's worked