Hope you guys enjoy these random objects of websites like Ali and Ebay, if you do then be sure to let us know in the comments here! Can check out the dual board too if you guys are really keen, but as I said in the video.... kind of already know how that will turn out :(.
The choke's are anyone's guess. But, those seem to be YTF brand Chinese capacitors made by Shenzhen Yike Technology or its parent/official name (can't figure it out) Shenzhen Jinmao Yuan Technology. Their capacitance is 820uF and they're rated at 2.5V. Chinese, so not great, but as long as VRM temps are ~80C or below, they won't explode on ya. The 'FETs are made by UBIQ (the logo's based on the lowercase form [ubiq]). Their full names are QM3092M6 and QM3098M6, and they seem to be pretty damn good. That's not a 7 phase doubled though, otherwise it'd look like a 14 phase. It's got one high-side and two low-side's, and the chips next to them are the driver's. Doubler's are like half the size of the driver's. Doesn't matter though, because it's a quality 7 phase. It just needs a bit of airflow via a case fan at the top, and a proper heatsink wouldn't hurt. Overall, the VRM's are decent.
Thanks for making this video! However it seems that the better choice regarding Chinese LGA 2011 boards is still the HuananZhi X79 Gaming or the X79 Plus, specifically V6.0 and up, as they do achieve the same CPU overclocks but also allows for the tuning of both RAM frequency and timmings up to DDR3 2133 CAS 11 at a lower price point. They do even have been voltmodded to reach 4.5 GHz on the E5-1650 V2! It would be great if such claims could be tested someday by you. Best regards!
What's your motherboard? It's Runing. I know it's running. I was asking what's the brand? It's Runing! I bloody know it's running! I want to know the brand! It's Runing! :p can't stop myself making this joke lol
ThrottleStop or Intel's XTU may help when trying to OC/lock in a particular clock speed/multiplier. I use ThrottleStop on my 7700K Kaby Lake Z170 based laptop to lock in a 4.5GHz frequency all core overclock (cache multiplier maxes out at 4.2GHz; a limitation of this particular chip is that it can't clock higher than that while remaining stable, at least at the -100Mv undervolt I have the cache and core clocks configured to which helps keep the CPU running cool at those speeds).
Funny, until a couple months ago I was planning on buying one of these boards- before taking advantage of a cheap deal on an X370 board+R5 2600, and splurging on 48GB of DDR4 (which is the amount of DDR3 I would've been able to populate this thing with...)
These boards are pretty reliable! I have been using one since may 2018 with a xeon e5 1650 overclocked to 4.1ghz with a bios mod, and it's still running smoothly. I use it with a Vega 56 and it's totally fine for 1080p games. I ought to upgrade the whole system at some point but I'm fine with running this for even a couple more years.
I used to own this board and had a 2680v2 on it with 64GB of registered DDR3. Good for the price and did well as a 1080p gaming system paired with an RX 580, but did have a couple issues...first is that the BIOS was not only simplistic, but Runing also didn't offer any BIOS updates, so you were stuck with the original one. Second is though this mobo has an MSATA port, I couldn't get my 860 EVO MSATA to work on it, BIOS didn't even recognize it! Third is even with an SSD, it took a long time to boot, mainly took a long time to get through the BIOS. Fourth is that the BIOS fan controls sucked, tried to run everything at 100% no matter which setting you picked. Fifth and most annoying is that the size is slightly LONGER than a standard ATX board, which should be 12"x9.6" and this was more like 12.6" long. That extra 0.6" in length means it won't fit many cases.
I've been using one of these for 12 months with a Xeon 2650v1 64gb of cheap ECC memory, low cost water cooler and an Intel nic running 8x3tb WD Reds in Freenas Z2 and it hasn't missed a beat
I purchased an x79 matx chinesium motherboard. It's build quality was really solid, I paid about $160 for it, shipping was $40. It's running my old 4820k with no issues. Board is a nice red and black. Edit: it also supports ECC memory Memory speed is not very high, I think the furthers I've pushed it was 1866Mhz before running into trouble. I also found the chinesium 2011 socket chip holder was much nicer then my Asus ROG Rampage IV
Got all of the parts in and did the install as per previous post. Very pleased with the Huanan x79 deluxe. Was even able to install WIN10Pro and boot on the NVME M.2 ((XPG GAMMIX 55 by ADATA 256GB)! Now...let's just see how long this little beast will last! System is running cool with a cheap $25 dual RGB fan 4-pipe cooler from AliExpress.
I run my huanan x79 v 2.46 c602 chipset with xeon e5 1650v1 on 4.2 ghz and with 32 gig ecc reg ram. Have this rig already 2 years, all is ok. You need a custom bios to rich a 4.1 - 4.3 ghz. Also, you can get a 4.5 ghz with a voltmod.
Those mosefets are up on Ali express for sale now. They are made by MOSLEADER which is a subsidiary of ON semiconductor. They are $11 for a 10 pack. But ratings looks pretty low at only 22A but since there double'd to 14 you could look at it like 7X44A looking at the video i don't see any doublers so the components are probably just doubled up so its looking like a 7phase.
I just upgraded my i7 3930K to a i7 8700K but i loved that 3930K, it was a great overclocker. I got it to 4.6 perfectly stable, never got 4.7 too work but the 3930k with my 980Ti was a great pair.
your overclock did not worked because you dont calculated it properly :D base frequency 133 Mhz x 43 or 42 you set gives you frequency close to 6Ghz, try to pul something like 32 in multiplier, it should work as you desire ;)
@@Apik17 Totally missed that part lol, thanks for the correction! How did they(China) manage to screw up stock BIOS setting so bad lol Edit: but at 6:40 AIDA64 states 100Mhz so who the frig knows lol
Thank you. Пользуюсь такой платой около 5 лет, ежедневно играю в среднем 5 - 6 часов в ресурсоемкие игры с работой видеокарты на предельных режимах и с разгоном процессора Xeon E5 1650v2 до 4,2 ГГц. И недавно Windows 10 pro (лицензионная) выдавала ошибку "Video TDR error" и компьютер либо зависал, либо перезагружался. После переустановки видеокарты MSI 1070 (видеокарта перешла со старого компьютера) в третий (если смотреть сверху) слот PCI-Е x16 проблема полностью исчезла. Интересно, что почему перестал работать верхний разъем PCI-Е x16 (может быть что-то сгорело, все контакты были чистыми, на плате никаких перегораний и запаха не было)?
I bought the same mobo for my 4820K and it works well. So far the only problem i encountered is the USB connections. Some devices are not recognized and i need to swap ports to get them running.
Bryan, could you take a look at the new X99 DDR3 board by HUANAN on Aliexpress? They've only been available for a couple weeks and I'd love for an English channel to do a review of it.
This video is why I love this channel. Even the crappiest hardware doesn't escape Brian's scrutiny. lol...and all I have to say about this motherboard is...well you don't want to know...let's just say it would be my last choice out of 1000.
your a big fan of x58 right?, is there a trick to getting the hp z400 motherboards to work?. reason I ask is because I have purchase like 6 of these boards off ebay, over last couple of years and they all turned out to be dead or had badly bent pins. but when I would bread board these on the table top with all the harnesses and switches and leds but without the case's, I could never get one of them to post!. but I have no problems with the z800's or the xw9400 server boards or even the z600's, but nothing I do seems to do a damn thing to help on the z400. were these a problem from the factory or what, because nothing I have read have shown any problems with them.
I have a Chinese x58 motherboard and it has no overclocking functions in the bios. Kind of gimps the x5670 I have in it but I've put it to work as a media PC, so things aren't all bad.
Bryan can you tell us what x58/x79 new/Chinese or w/e boards overclock over 4.0ghz? At least 4.0-4.4ghz or so. Not interested in boards stuck at default to 3.9ghz. let us know. Thanks Maybe even a video of the only worth it oc x58/79 boards.
6c/12t 3.9 GHz is fine for now. I recently did a X58 build with the Intel DX58SO + X5675 CPU. Also clocked that to only 3.9 GHz. (only a 92mm Noctua tower cooler and that Intel MB is not really good at OC, and I wanted the BCLK down and rely on Turbo). Paired with a GTX 1070 is was still a capable system. Actually did about 900cb i Cinebench (not far from this one) Can't remember the excact result though. :)
Did you check if those pci-e 16x work when you use more than 2 at same time. Atleast one version of this board only lets you use either Black or Grey slots at same time.
You're right about dual CPU. I have Dell Precision Workstation T5500 with dual xeon X5670. Some games won't run until disabling some cores in BIOS or via msconfig.
some are, some are not, a buddy of mine tested 8 kits(sort of his hobby) found one was "bloody amazing" and some where MEH, worse then AIO, but, whats funny is, every kid came with some good parts, sometimes just mixing and matching got him amazing results, one came with amazing fans, but...the rad shroud was crap no seal, moved to a nice uber thiccccc 240 rad that came with a horrible block... etc, it can be fun, some kits are VERY nice for the price, one came with a pump i used in a job i had that would run for a decade 24/7 before a chance it was gonna stop, high flow and pressure... amazing...
Hello my friend i have a question ... i have the Runing X79 Motherboard and i have the E5-2690 v2 and in the game it reaches on turbo boost just at 3.3GHz .... do u have a better bios to give me ??? ......
@TechYesCity Test out the mSATA slot, never could get it to work even after speaking to Russians. The jumpers were said to enable mSATA but will disable some of the SATA ports.
I will use my SSD, HDD, Roswill 650W PS, GTX 1050, soundcard and BlueRay DVD from my old DELL XPS 420 Q6600. Also, an extra 16GB of EEC 1600Mhz RAM I have. Just bought a Cooler MasterBox Pro 5 RGB for $88 delivered. A Huanan X79 Deluxe with the M.2 slot on the board ($138)...and an E5 1650 V2 ($134). I think it will turn out to be a pretty decent rig for home use...as I will be satisfied with 3.9 Ghz, so I doubt I will push the limits on OC here. We shall see.
This is not for people that are building from scratch. This is for people like me that already have some DDR3 ram, a decent CPU cooler, SSD, graphics card, etc. I'm coming from an AMD 960t desktop with 16GB of DDR3 and a Thermaltake Frio Extreme. I also own an i7 2670MQ laptop. All I have to do is buy a cheap six core E5-1650 or an octa core E5-2690 (your choice, both are around $65 to $70 right now), use my DDR3 ram or buy 32GB of dirt cheap registered DDR3 ram on eBay for $45 to $50, use my already powerful 1000w power supply and my old SSD, and the difference would be massive compared to my old rig. I can choose this more expensive Runing board or I can be patient and wait for a proper branded used board on eBay for around $150. Or perhaps I can choose something less fancy like the PlexHD X79 that can be found for around $90 and does the job just fine. There are many ways to jump on the X79 platform these days. So, if you are coming from an older platform that used DDR3, for a little over $150 your computer can become relevant again. We are talking about near Ryzen 2600 performance for the price of a single Ryzen 2600 or less. And if you are in a tight budget, there are some motherboards for as little as $60 (not recommend, though), making this upgrade possible with just a little over $100. So in my opinion, yes, these Chinese boards are still worth it. However, if you are in a budget but are building from scratch, just get a Ryzen.
That's actually a common budget arrangement. Per phase MOSFET gate driver IC + one high-side and two low-side in parallel, which is a cheap way to distribute the load, lower the losses and make things less explodey. You must find either one very expensive low-side MOSFET with ultra low RDSon or two of the more normal garden variety ones in parallel, that's how it is, and so doubled up lowers are common on budget boards. Separate gate drivers is another cheap solution. I mean nothing wrong with all that, but the whole thing seems to look more impressive to you than it really is?
Was looking into this board today as there is a mobile deal on AliExpress for NZ$182 however on further inspection this motherboard will not fit my case even though my case will fit an eatx. This motherboard has a non standard shape just like the green huanan x79 2.49. Anyone have any ideas of what case this thing will fit in?
I use this board with my 12 core Xeon 2695 v2, and loaded it with 64g of Ram. It works fine, except some USBs are occasionally not recognizing couple of peripherals. Do you know if there is an official website from Running with firmware updates? Or is there a forum about troubleshooting problems with that mobo? Thank you for this video!
You're not just crazy, the PCB definitely has a brown tin to it under light. And yeah' I've noticed a lot of budget boards have that. Whatever they're using to color them is probably more mahogany or coffee color than actual black. Its a weird thing to skimp on, but I guess you have to cut corners somewhere.
I have a not too old lapper but it's a 1.0GHz dual core, was thinking of taking the CPU cooler out and maybe making a VRM cooler with it. Just trying to think of how to power it.
@Tech YES City I am getting an i7 3930k with an arctic liquid freezer 240 and a Asus Rampage IV Formula. I can not get an 4.6GHz overclock stable, because I tested this combo a whole day with gaming and some stress testing like cinebench, but after 3 hours it crashes all the times (CLOCK_WATCHDOG_TIMEOUT). The temperatures getting no more than 70°C and I tested that system with 1.2V, 1.25V, 1.3V and with 1.35V but that didn't work. Please help me
@@WarriorsPhoto huanan and runing both have a x99 right now though the huanan only supports Ddr3 thus cpu choice is very limited the runing supports Ddr4 the huanan also has 10 phase power I think the runing does aswel but not 100% sure
Would it make sense for someone (me) with a complete i7, x79 system from 2013 or so (but which still performs well enough for everything I need - 70+ fps in Terran X3 @ 4k!) to swap in a Chinese X79 MB to get the NVMe capability? (I have a Gigabyte X79-UP4, so the two things I would lose are the 4 extra memory slots (but I currently use 4x4 (for 16) memory now, quite adequate) and the digital/SPDIF sound output, but I could buy a card for that.) Thoughts? I'm currently booting and running off a SATA SSD, so how much benefit would there be to boot/run off an NVMe drive?
Pronunciation is more like "Roo-ning" I guess, since I don't know what URL (If there's any) of the brand itself that I can read the actual characters of
Those chokes look pretty good. I've found little data on those mosfet numbers but nothing promising. (Still looking) but lets say worst case scenario there 40A chokes. That would be 280A's max going through the VRM. That's enough to run a 6c12t cpu with a light OC. Will get back soon as i find out more on the VRM. Also I'll msg. Buildzoid and see what he thinks. I have a feeling they will be sufficient.
For a bit more, probably about 150 Yankee dollar you'd get a proper (2nd hand) x79 probably, tested and working... Saw many of those "no-name" or some "X-name" mobos, some were even strange combos of mobile chipset and dimm ram (not so-dimm), problems with even booting into OS, etc... It's ok if you want to play a bit and throw it to garbage then, X (x58, x79, 99, 299) are (were) workstation platform, and you need stability and support for this use, so those boards aren't really so cheap (read not worth it) if you calculate a bit, but a nice experiment anyway... Sometimes I buy strange parts too to have a peek and have some fun with!
I bought this exact same board for a server upgrade but can't get video out with any of my Xeons. If Mr. Yes happens to have a 2690 lying around to test as well that'd be super.
what mobo? asus, msi, gigabyte? those are like 45-60€ and the cpu is 15/16€ i almost bought it, but then i rememeber i still have a fx8370e with msi 970 mobo that i use for mining so i bought a old h61 mobo with 4 pci ports of aliexpres and i have a dual core celeron to go with that , for the miner. no need to buy more parts when i still have parts.
idk about the mobo but i've bought a x3440 from aliexpress back then and it run finely @3.8ghz at first but as time went by i've started to get BSODs,having to reduce clock to 3.35ghz
Yes thank you for pointing that out. I already comment but I have this board and it won't fit in my case and my case is an atx and I don't know what case to get to be able to use it 😔
Being a recent design, the BIOS developers really should have included NVMe boot in the UEFI, especially sine they are using AMI Aptio firmware which has an open source NVMe driver. (My dual socket Asus server board has a modded BIOS that supports said NVMe driver, and it boots from a WD Black NVMe 1TB using that native driver.)
If it's 2011 and supports x79. It will work but bare in mind that if you use an i7 you will need normal ddr3 ram. Only when using a xeon is ecc supported
I have this motherboard and an E5-2670 8 core 16 thread CPU but I don't know what case it will fit in because it's a big motherboard, can someone help me? It doesn't have to be a fancy case just anything will work.! Thank you
I have a gigabyte 970a-ds3p Rocking an AMD 6300... 24Gb DDR3 Ram and a GTX 960 2Gb OC edition.... My gameplay is not great... Could use a few pointers to help performance wise...?
I was watching Russian review of this board. Russians love AliExpress. This board is limited to 3.9 ghz on any CPU you put into it. Another glitch is when you put the computer to sleep PCIE cards stay lit, and fans stay spinning on your gpu. There was another glitch, that I cannot remember right now.
Hope you guys enjoy these random objects of websites like Ali and Ebay, if you do then be sure to let us know in the comments here! Can check out the dual board too if you guys are really keen, but as I said in the video.... kind of already know how that will turn out :(.
awww... come on! it'd be fun to check out the dual socket!
I enjoy that content!
Dual socket does seems not so good to me personally
it seems like your burned out man,
as I know this motherboard size is not standard and it does not fits in regular atx cases can you conform that?
Try buying the bost bought P55 mobo on aliexpress and a X3440 on Aliexpress and rewiew those?? its 60€ in total
The choke's are anyone's guess.
But, those seem to be YTF brand Chinese capacitors made by Shenzhen Yike Technology or its parent/official name (can't figure it out) Shenzhen Jinmao Yuan Technology. Their capacitance is 820uF and they're rated at 2.5V. Chinese, so not great, but as long as VRM temps are ~80C or below, they won't explode on ya.
The 'FETs are made by UBIQ (the logo's based on the lowercase form [ubiq]). Their full names are QM3092M6 and QM3098M6, and they seem to be pretty damn good.
That's not a 7 phase doubled though, otherwise it'd look like a 14 phase. It's got one high-side and two low-side's, and the chips next to them are the driver's. Doubler's are like half the size of the driver's. Doesn't matter though, because it's a quality 7 phase. It just needs a bit of airflow via a case fan at the top, and a proper heatsink wouldn't hurt.
Overall, the VRM's are decent.
I think they're ferrite chokes but I'm not sure
Man, the motherboard analyst community coming in clutch as usual.
I have already using more than 2 years
Thanks for making this video! However it seems that the better choice regarding Chinese LGA 2011 boards is still the HuananZhi X79 Gaming or the X79 Plus, specifically V6.0 and up, as they do achieve the same CPU overclocks but also allows for the tuning of both RAM frequency and timmings up to DDR3 2133 CAS 11 at a lower price point. They do even have been voltmodded to reach 4.5 GHz on the E5-1650 V2! It would be great if such claims could be tested someday by you. Best regards!
What's your motherboard?
It's Runing.
I know it's running. I was asking what's the brand?
It's Runing!
I bloody know it's running! I want to know the brand!
It's Runing!
:p can't stop myself making this joke lol
...
So you still don't get it? let me spell it; R-U-N-I-N-G
What? you teach me saying running? enough man! get your motherboard soon! bye!
Wait! No!
m.ua-cam.com/video/W6oQUDFV2C0/v-deo.html
Why are you Running?
I enjoyed your joke too much.
Oh dang it man, I wanted to do the joke
p4 nx still can. LOL
I got this board for an year and until now it works fine , i have paring with E5 2690 v1 ,32 GB DDR3 ECC REG memorys and it works very good.
Scared me when you said until now because I just got something extremely similar.
@@XX-ep5xt after almost 5 years its still working greate
there are really cheap 75 dollar boards that if you just want to run an e5 xeon and never oc, are pretty decent boards
Knero Tech x58 boards are going down in price and the x5650 is only $15
oh yeah yeah
Love the light in this video, even low resolutions are crystal clear :)
ThrottleStop or Intel's XTU may help when trying to OC/lock in a particular clock speed/multiplier. I use ThrottleStop on my 7700K Kaby Lake Z170 based laptop to lock in a 4.5GHz frequency all core overclock (cache multiplier maxes out at 4.2GHz; a limitation of this particular chip is that it can't clock higher than that while remaining stable, at least at the -100Mv undervolt I have the cache and core clocks configured to which helps keep the CPU running cool at those speeds).
The old tech angle is a winner! Keep 'em coming. Great to see what the older tech is capable of. Great to have options.
Yes man delivering on the entertainment on this Sunday afternoon in NYC.
Why when you can get a B450 board for $70 and a Ryzen 2600 for $160? Its not really more expensive or anything.
DDR4 ram dude, DDR4 ram...
@@Martinpintos13 It's not that bad as it used to be
you can get 16gb ddr4 ecc registered for 40 bucks
Funny, until a couple months ago I was planning on buying one of these boards- before taking advantage of a cheap deal on an X370 board+R5 2600, and splurging on 48GB of DDR4 (which is the amount of DDR3 I would've been able to populate this thing with...)
Plus the ryzen 1600 can be had for a bargain these days
These boards are pretty reliable! I have been using one since may 2018 with a xeon e5 1650 overclocked to 4.1ghz with a bios mod, and it's still running smoothly. I use it with a Vega 56 and it's totally fine for 1080p games. I ought to upgrade the whole system at some point but I'm fine with running this for even a couple more years.
Great review Brian! I own several X58 and X79 boards from Asus such as the R4E. Amazing ability on that board considering its age.
I used to own this board and had a 2680v2 on it with 64GB of registered DDR3. Good for the price and did well as a 1080p gaming system paired with an RX 580, but did have a couple issues...first is that the BIOS was not only simplistic, but Runing also didn't offer any BIOS updates, so you were stuck with the original one. Second is though this mobo has an MSATA port, I couldn't get my 860 EVO MSATA to work on it, BIOS didn't even recognize it! Third is even with an SSD, it took a long time to boot, mainly took a long time to get through the BIOS. Fourth is that the BIOS fan controls sucked, tried to run everything at 100% no matter which setting you picked. Fifth and most annoying is that the size is slightly LONGER than a standard ATX board, which should be 12"x9.6" and this was more like 12.6" long. That extra 0.6" in length means it won't fit many cases.
I've been using one of these for 12 months with a Xeon 2650v1 64gb of cheap ECC memory, low cost water cooler and an Intel nic running 8x3tb WD Reds in Freenas Z2 and it hasn't missed a beat
Try to use Intel XTU software to fine tune the overlock. Maybe it works
Its called runing because it wasn't running quite as well as it could.
ruining :)
I purchased an x79 matx chinesium motherboard.
It's build quality was really solid, I paid about $160 for it, shipping was $40.
It's running my old 4820k with no issues.
Board is a nice red and black.
Edit: it also supports ECC memory
Memory speed is not very high, I think the furthers I've pushed it was 1866Mhz before running into trouble.
I also found the chinesium 2011 socket chip holder was much nicer then my Asus ROG Rampage IV
Got all of the parts in and did the install as per previous post. Very pleased with the Huanan x79 deluxe. Was even able to install WIN10Pro and boot on the NVME M.2 ((XPG GAMMIX 55 by ADATA 256GB)! Now...let's just see how long this little beast will last! System is running cool with a cheap $25 dual RGB fan 4-pipe cooler from AliExpress.
asus x79 formula + 1650 v2 owner here. 4.8ghz stable :D happy days
I run my huanan x79 v 2.46 c602 chipset with xeon e5 1650v1 on 4.2 ghz and with 32 gig ecc reg ram. Have this rig already 2 years, all is ok. You need a custom bios to rich a 4.1 - 4.3 ghz. Also, you can get a 4.5 ghz with a voltmod.
An overclockable X58 DualSocket board video would be greatly appreciated!
Those mosefets are up on Ali express for sale now. They are made by MOSLEADER which is a subsidiary of ON semiconductor. They are $11 for a 10 pack. But ratings looks pretty low at only 22A but since there double'd to 14 you could look at it like 7X44A looking at the video i don't see any doublers so the components are probably just doubled up so its looking like a 7phase.
I just upgraded my i7 3930K to a i7 8700K but i loved that 3930K, it was a great overclocker. I got it to 4.6 perfectly stable, never got 4.7 too work but the 3930k with my 980Ti was a great pair.
you can enable the MSATA port by setting all the four jumpers near the MSATA to 1-2 instead of the default 2-3
your overclock did not worked because you dont calculated it properly :D base frequency 133 Mhz x 43 or 42 you set gives you frequency close to 6Ghz, try to pul something like 32 in multiplier, it should work as you desire ;)
Stock base is 100Mhz, just saying lol
@@thebait68 look at 4:41 in Video - base frequency 133 Mhz ;) , 100 is in most bioses but this case might be different : )
@@Apik17 Totally missed that part lol, thanks for the correction! How did they(China) manage to screw up stock BIOS setting so bad lol
Edit: but at 6:40 AIDA64 states 100Mhz so who the frig knows lol
@@thebait68 It says 100MHz BCLK in Windows probably because the 133x44 settings in BIOS failed and as such booted at 100MHz BCLK.
@@AndyBradley1984 it was a rhetorical statement on my behalf, but thanks anyway lol
Thank you. Пользуюсь такой платой около 5 лет, ежедневно играю в среднем 5 - 6 часов в ресурсоемкие игры с работой видеокарты на предельных режимах и с разгоном процессора Xeon E5 1650v2 до 4,2 ГГц. И недавно Windows 10 pro (лицензионная) выдавала ошибку "Video TDR error" и компьютер либо зависал, либо перезагружался. После переустановки видеокарты MSI 1070 (видеокарта перешла со старого компьютера) в третий (если смотреть сверху) слот PCI-Е x16 проблема полностью исчезла. Интересно, что почему перестал работать верхний разъем PCI-Е x16 (может быть что-то сгорело, все контакты были чистыми, на плате никаких перегораний и запаха не было)?
I bought the same mobo for my 4820K and it works well. So far the only problem i encountered is the USB connections. Some devices are not recognized and i need to swap ports to get them running.
Bryan, could you take a look at the new X99 DDR3 board by HUANAN on Aliexpress? They've only been available for a couple weeks and I'd love for an English channel to do a review of it.
very cool idea.
I bought a plexhd x79 turbo for €80 stock bios 4.2 ghz stable on my 1650v2
This video is why I love this channel. Even the crappiest hardware doesn't escape Brian's scrutiny. lol...and all I have to say about this motherboard is...well you don't want to know...let's just say it would be my last choice out of 1000.
your a big fan of x58 right?, is there a trick to getting the hp z400 motherboards to work?. reason I ask is because I have purchase like 6 of these boards off ebay, over last couple of years and they all turned out to be dead or had badly bent pins. but when I would bread board these on the table top with all the harnesses and switches and leds but without the case's, I could never get one of them to post!. but I have no problems with the z800's or the xw9400 server boards or even the z600's, but nothing I do seems to do a damn thing to help on the z400. were these a problem from the factory or what, because nothing I have read have shown any problems with them.
Have you tried setting the voltage with intel XTU? I use this to undervolt my laptop cpu without using the bios.
I have a Chinese x58 motherboard and it has no overclocking functions in the bios. Kind of gimps the x5670 I have in it but I've put it to work as a media PC, so things aren't all bad.
Bryan can you tell us what x58/x79 new/Chinese or w/e boards overclock over 4.0ghz? At least 4.0-4.4ghz or so. Not interested in boards stuck at default to 3.9ghz. let us know. Thanks
Maybe even a video of the only worth it oc x58/79 boards.
Hello I have the model running x79 128 gb Ram in my hand I want to install specs buzzer motherboard port where do you help
6c/12t 3.9 GHz is fine for now. I recently did a X58 build with the Intel DX58SO + X5675 CPU. Also clocked that to only 3.9 GHz. (only a 92mm Noctua tower cooler and that Intel MB is not really good at OC, and I wanted the BCLK down and rely on Turbo). Paired with a GTX 1070 is was still a capable system. Actually did about 900cb i Cinebench (not far from this one) Can't remember the excact result though. :)
I have an Atermiter x99. I can't get the SATA M.2 SSD drive to show up, is there a an option I need to enable? Please help.
how to disable SCSI in this motherboard? I can't set 4g decoding to enable, A6 code came out and black screen
The MOSFETs are likely QM3092M6 and QM3098M6 from UBIQ. The QM3098M6 is rated for 30V / 128A / 3mOhm, not bad if they have 14 of them...
Did you check if those pci-e 16x work when you use more than 2 at same time. Atleast one version of this board only lets you use either Black or Grey slots at same time.
You're right about dual CPU. I have Dell Precision Workstation T5500 with dual xeon X5670. Some games won't run until disabling some cores in BIOS or via msconfig.
Hi,could you help me on some issue of QHQG processor?
I can' properly work Intel display drivers on it,it would freeze if i install it.
Was there a way to set the multiplier if you disabled the turbo? I wonder if that would allow an attempt at a higher locked frequency.
Bryan, you should look into getting some generic water cooling on Aliexpress, I’ve heard they’re comparable to the $300+ kits that EK sells.
some are, some are not, a buddy of mine tested 8 kits(sort of his hobby) found one was "bloody amazing" and some where MEH, worse then AIO, but, whats funny is, every kid came with some good parts, sometimes just mixing and matching got him amazing results, one came with amazing fans, but...the rad shroud was crap no seal, moved to a nice uber thiccccc 240 rad that came with a horrible block... etc, it can be fun, some kits are VERY nice for the price, one came with a pump i used in a job i had that would run for a decade 24/7 before a chance it was gonna stop, high flow and pressure... amazing...
Hello my friend i have a question ... i have the Runing X79 Motherboard and i have the E5-2690 v2 and in the game it reaches on turbo boost just at 3.3GHz .... do u have a better bios to give me ??? ......
@TechYesCity Test out the mSATA slot, never could get it to work even after speaking to Russians. The jumpers were said to enable mSATA but will disable some of the SATA ports.
I will use my SSD, HDD, Roswill 650W PS, GTX 1050, soundcard and BlueRay DVD from my old DELL XPS 420 Q6600. Also, an extra 16GB of EEC 1600Mhz RAM I have. Just bought a Cooler MasterBox Pro 5 RGB for $88 delivered. A Huanan X79 Deluxe with the M.2 slot on the board ($138)...and an E5 1650 V2 ($134).
I think it will turn out to be a pretty decent rig for home use...as I will be satisfied with 3.9 Ghz, so I doubt I will push the limits on OC here. We shall see.
This is not for people that are building from scratch. This is for people like me that already have some DDR3 ram, a decent CPU cooler, SSD, graphics card, etc.
I'm coming from an AMD 960t desktop with 16GB of DDR3 and a Thermaltake Frio Extreme. I also own an i7 2670MQ laptop. All I have to do is buy a cheap six core E5-1650 or an octa core E5-2690 (your choice, both are around $65 to $70 right now), use my DDR3 ram or buy 32GB of dirt cheap registered DDR3 ram on eBay for $45 to $50, use my already powerful 1000w power supply and my old SSD, and the difference would be massive compared to my old rig.
I can choose this more expensive Runing board or I can be patient and wait for a proper branded used board on eBay for around $150. Or perhaps I can choose something less fancy like the PlexHD X79 that can be found for around $90 and does the job just fine. There are many ways to jump on the X79 platform these days.
So, if you are coming from an older platform that used DDR3, for a little over $150 your computer can become relevant again. We are talking about near Ryzen 2600 performance for the price of a single Ryzen 2600 or less. And if you are in a tight budget, there are some motherboards for as little as $60 (not recommend, though), making this upgrade possible with just a little over $100.
So in my opinion, yes, these Chinese boards are still worth it. However, if you are in a budget but are building from scratch, just get a Ryzen.
That's actually a common budget arrangement. Per phase MOSFET gate driver IC + one high-side and two low-side in parallel, which is a cheap way to distribute the load, lower the losses and make things less explodey. You must find either one very expensive low-side MOSFET with ultra low RDSon or two of the more normal garden variety ones in parallel, that's how it is, and so doubled up lowers are common on budget boards. Separate gate drivers is another cheap solution. I mean nothing wrong with all that, but the whole thing seems to look more impressive to you than it really is?
X79 on a budget, but with less compromise? This looks interesting for new entries into the x79 HUSTLE GAME!
Was looking into this board today as there is a mobile deal on AliExpress for NZ$182 however on further inspection this motherboard will not fit my case even though my case will fit an eatx. This motherboard has a non standard shape just like the green huanan x79 2.49. Anyone have any ideas of what case this thing will fit in?
I use this board with my 12 core Xeon 2695 v2, and loaded it with 64g of Ram. It works fine, except some USBs are occasionally not recognizing couple of peripherals. Do you know if there is an official website from Running with firmware updates? Or is there a forum about troubleshooting problems with that mobo? Thank you for this video!
Black PCB? Looks a lot more brown to me.
Check your monitor?
Fefinix
It's not my monitor. Literally anything I've viewed one of these on, and some other cheaper boards, look brown.
You're not just crazy, the PCB definitely has a brown tin to it under light. And yeah' I've noticed a lot of budget boards have that. Whatever they're using to color them is probably more mahogany or coffee color than actual black.
Its a weird thing to skimp on, but I guess you have to cut corners somewhere.
Yeah, how much does it cost to change the PCB's color anyway?
I have this board with a e5-1650 v2 and it will run 4.3 stable 24/7. Might do a volt mod and see if it will go higher.
I have a not too old lapper but it's a 1.0GHz dual core, was thinking of taking the CPU cooler out and maybe making a VRM cooler with it. Just trying to think of how to power it.
How do you tell if a motherboard is a true X79 or not ? I've ordered some X79 board on aliexpress and want to check
@Tech YES City I am getting an i7 3930k with an arctic liquid freezer 240 and a Asus Rampage IV Formula. I can not get an 4.6GHz overclock stable, because I tested this combo a whole day with gaming and some stress testing like cinebench, but after 3 hours it crashes all the times (CLOCK_WATCHDOG_TIMEOUT). The temperatures getting no more than 70°C and I tested that system with 1.2V, 1.25V, 1.3V and with 1.35V but that didn't work. Please help me
Good video. Does this company make boards for other platforms? X58, X99, etc...?
Probably X58. At least there are lot of Chinese X58 boards around.
- - Cool, my buddy is looking for one.
@@WarriorsPhoto huanan and runing both have a x99 right now though the huanan only supports Ddr3 thus cpu choice is very limited the runing supports Ddr4 the huanan also has 10 phase power I think the runing does aswel but not 100% sure
mark w Awesome. Thank you.
Would it make sense for someone (me) with a complete i7, x79 system from 2013 or so (but which still performs well enough for everything I need - 70+ fps in Terran X3 @ 4k!) to swap in a Chinese X79 MB to get the NVMe capability? (I have a Gigabyte X79-UP4, so the two things I would lose are the 4 extra memory slots (but I currently use 4x4 (for 16) memory now, quite adequate) and the digital/SPDIF sound output, but I could buy a card for that.) Thoughts? I'm currently booting and running off a SATA SSD, so how much benefit would there be to boot/run off an NVMe drive?
Pronunciation is more like "Roo-ning" I guess, since I don't know what URL (If there's any) of the brand itself that I can read the actual characters of
will this be any good for a multipurpose hobby web/minecraft/file server.
👍!👍! Good vid. I'm with you on the dual cpu boards, not a fan of them either.
What motherboard would you recommend for a 4820k?
Those chokes look pretty good. I've found little data on those mosfet numbers but nothing promising. (Still looking) but lets say worst case scenario there 40A chokes. That would be 280A's max going through the VRM. That's enough to run a 6c12t cpu with a light OC. Will get back soon as i find out more on the VRM. Also I'll msg. Buildzoid and see what he thinks. I have a feeling they will be sufficient.
You coukd try running the latest version of HWinfo64 or Aida64. They may shed some light on the VRM.
hey i need help im trying to build a new x58 system with x5675 and gigabyte x58a-ud3r(are they compatible?)noob here
where download the drivers of that x79 board is compatible with any x79 china plate
Love how they misspelled running lol!
For a bit more, probably about 150 Yankee dollar you'd get a proper (2nd hand) x79 probably, tested and working... Saw many of those "no-name" or some "X-name" mobos, some were even strange combos of mobile chipset and dimm ram (not so-dimm), problems with even booting into OS, etc... It's ok if you want to play a bit and throw it to garbage then, X (x58, x79, 99, 299) are (were) workstation platform, and you need stability and support for this use, so those boards aren't really so cheap (read not worth it) if you calculate a bit, but a nice experiment anyway... Sometimes I buy strange parts too to have a peek and have some fun with!
On the Xeon 1650 V2, I assume you know this by now, but it has an unlocked multiplier.
So if this has a c600 chipset.. can you get ecc working with an xeon? could be good for freenas
i use huanan x79 2.49 rev (orange one) c600 chipset oc's to 4.0 not much but you must to flash the modded bios
just bought it, and it's great! only issue is that my peripherals on usb 3 don't work...
its pretty damn good otherwise.
The strange name is actually a Chinese translation of 阜宁 or something like that which is ru ning in hanyu Pinyin.
x79 motherboard are not install G Force Nvidia software please give me suggestion how to do install
Great video, hope u test bunch of stuff from aliexpress!
Have you been able to test the huanan dual x79-16D (spefically)?
im Running a i7 3939K myself on a gigabyte ud3 motherboard,im running a OC of 4.4ghz,But it takes some cooling
this motherboard unlocked voltage & overclockable?
Can you review the ALZENIT X79-CE7 Desktop Motherboard ?
i like ur work thx for vid!! 👍👍
I bought this exact same board for a server upgrade but can't get video out with any of my Xeons. If Mr. Yes happens to have a 2690 lying around to test as well that'd be super.
You will need a gpu for that the motherboard nor the xeons have integrated graphics
I would be interested to see is the Xeon v3 all-core BIOS micocode hack work on this board. Something like a 2680v3 12c/24t @ 3.3GHz?
Wait. Nevermind.. Thinking X99 lol.
Picked up an Asus sabertooth on Ebay for 120 usd and a 3930k for 50. Not too bad a deal.
Can you use the intel extreme tuning utility overclocking software to OC the chip ?
Try buying the bost bought P55 mobo on aliexpress and a Xeon X3440 on Aliexpress and rewiew those?? its 60€ in total
what mobo? asus, msi, gigabyte? those are like 45-60€ and the cpu is 15/16€ i almost bought it, but then i rememeber i still have a fx8370e with msi 970 mobo that i use for mining so i bought a old h61 mobo with 4 pci ports of aliexpres and i have a dual core celeron to go with that , for the miner. no need to buy more parts when i still have parts.
idk about the mobo but i've bought a x3440 from aliexpress back then and it run finely @3.8ghz at first but as time went by i've started to get BSODs,having to reduce clock to 3.35ghz
@@reggiexp69 its a p55 unbranded one. No brand name specified
@@marcusbrajic7169 okay so the cheap ones. like those ITX mobo you have on aliexpress for 30 ish euro. got anyluck with OC?
@@reggiexp69 havent got it yet. Its a matx board so we'll ser when i get it
Does anyone know where I can find bios updates for a Runing board? I have the x99 1.2 but I can find anything on it besides eBay and aliexpress links.
Its an XL-ATX board though, so make sure your case is big enough :P
Yes thank you for pointing that out. I already comment but I have this board and it won't fit in my case and my case is an atx and I don't know what case to get to be able to use it 😔
@@mommy3505 maybe E-ATX. Check dimensions before
I managed to grab a 3930k and Asus P9X79 Pro motherboard for +- $180 US which I think is pretty good
Being a recent design, the BIOS developers really should have included NVMe boot in the UEFI, especially sine they are using AMI Aptio firmware which has an open source NVMe driver. (My dual socket Asus server board has a modded BIOS that supports said NVMe driver, and it boots from a WD Black NVMe 1TB using that native driver.)
陈北宗 my z77 board has a beta bios to support nvme booting.
I'm not sure if i missed but what are those white coolers?
painted 212 evo?
Does anyone know what USB 2/3 chips this motherboard is using?
Just saw someone in the overclocking subreddit talking about getting that 3930k up to 5.3 Ghz... Crazy
Is this motherboard compatible with the i7-4930K and other CPU's from that generation?
If it's 2011 and supports x79. It will work but bare in mind that if you use an i7 you will need normal ddr3 ram. Only when using a xeon is ecc supported
I have this motherboard and an E5-2670 8 core 16 thread CPU but I don't know what case it will fit in because it's a big motherboard, can someone help me? It doesn't have to be a fancy case just anything will work.! Thank you
I have a gigabyte 970a-ds3p Rocking an AMD 6300... 24Gb DDR3 Ram and a GTX 960 2Gb OC edition.... My gameplay is not great... Could use a few pointers to help performance wise...?
Id say the issue is CPU and your graphics card, 2GB is just not enough
Would Intel xtu work maybe for oc
So what socket does it use? I don't get it because he's using a i7, but its a xeon mobo?
Socket 2011. There are xeon 2011's as well as xeon 2011's.
I was watching Russian review of this board. Russians love AliExpress. This board is limited to 3.9 ghz on any CPU you put into it. Another glitch is when you put the computer to sleep PCIE cards stay lit, and fans stay spinning on your gpu. There was another glitch, that I cannot remember right now.
Got this puppy brand new for 20 euro's in a Chinese thrift store!