This was very helpful. You explained everything so well. Transitioning from RC fixed wing airplanes to helicopters has been a little intimidating, but still fun. I started out with the little fixed pitch E129, then progressed to the XK K110, and now the E160. Thanks for sharing your expertise.
Super erklärt prima hab auch ein bisschen Probleme mit dem Hold Schalter schade das es kein redet gibt für den Sender und zum Schluss die mechanische timmung muss ich Testen er will immer ausbrechen beim Start Danke
I believe it should work… the XK x6 TX works with my e160 and my e180. The e6 tx and x6 are basically the same tx in a different shell. Take it slow and learn to hover in all orientations 1st. Please Subscribe, Like and Ding the 🔔!!!
Thanks for the comment! I’m not sure if you can use the TX with accuRC 2… I have an older flight sim that I haven’t used in 5 years… I do most my learning in the air but that has high consequences:( You will love this heli! Please Subscribe, Like and Ding the 🔔!
@@DaddysRCAddiction I appreciate the response. I'm scouring the internet for people who have connected it to their PC. Not having much luck. Guess I'll find out when it arrives.
On the X6 tx which is basically the same as the E6 you can switch back to factory settings… I have the process written down at home but I’m not home at the moment. I’ll try to send it to you later. Alternatively, there are 10 different models you can set on the E6 TX… sometimes the manufacturer programs the same factory settings on some of the other model memory’s. Please Subscribe, Like And Ding the 🔔!
@@michaelhawkinson4532 Starting with the TX off hold down the MODE and BACK button then turn on the TX while holding those buttons down for about 5 seconds... the display should read CC... then the display should switch to the normal view and your TX should have the factory settings restored. Hope this helps!
Thanks for the comment! I don't use 6G... I always have my Gear switched in Acro mode (Gear switch towards me). There are some systems that do require you to land to switch between 6G and Acro mode. I don't recall if this is one that does or not... I'll try it out on mine and get back to you... So, you may not be doing anything wrong. Please Subscribe, Like and Ding the Bell!!!
Absolutely amazing video explains everything so well there is nothing else like this on UA-cam. Thank you so much.
This was very helpful. You explained everything so well. Transitioning from RC fixed wing airplanes to helicopters has been a little intimidating, but still fun. I started out with the little fixed pitch E129, then progressed to the XK K110, and now the E160. Thanks for sharing your expertise.
Super erklärt prima hab auch ein bisschen Probleme mit dem Hold Schalter schade das es kein redet gibt für den Sender und zum Schluss die mechanische timmung muss ich Testen er will immer ausbrechen beim Start Danke
Thanks for the comment, Let me know if you need any help. Please Subscribe, Like and Ding the bell!
Why swash type is always 90 degree, although the actual configuration on heli is 120. Does the receiver makes the mixing?
Will the XK 6CH transmitter work for the Eachine e150 helicopter and yes im new to Helicopters.
I believe it should work… the XK x6 TX works with my e160 and my e180. The e6 tx and x6 are basically the same tx in a different shell.
Take it slow and learn to hover in all orientations 1st.
Please Subscribe, Like and Ding the 🔔!!!
I just ordered an e160 v2 with this transmitter. Do you know if i can connect to my pc and use it with AccuRC 2? Thanks for the vid.
Thanks for the comment! I’m not sure if you can use the TX with accuRC 2… I have an older flight sim that I haven’t used in 5 years… I do most my learning in the air but that has high consequences:(
You will love this heli!
Please Subscribe, Like and Ding the 🔔!
@@DaddysRCAddiction I appreciate the response. I'm scouring the internet for people who have connected it to their PC. Not having much luck. Guess I'll find out when it arrives.
Any way to set my E6 back to factory settings on the blackhawk helicopter
On the X6 tx which is basically the same as the E6 you can switch back to factory settings… I have the process written down at home but I’m not home at the moment. I’ll try to send it to you later. Alternatively, there are 10 different models you can set on the E6 TX… sometimes the manufacturer programs the same factory settings on some of the other model memory’s.
Please Subscribe, Like And Ding the 🔔!
@@DaddysRCAddiction Thank you.
@@michaelhawkinson4532 Starting with the TX off hold down the MODE and BACK button then turn on the TX while holding those buttons down for about 5 seconds... the display should read CC... then the display should switch to the normal view and your TX should have the factory settings restored. Hope this helps!
when I turn 6g back on - E160 does not level itself. It only does so when I land and start again - what did I do wrong?
Thanks for the comment! I don't use 6G... I always have my Gear switched in Acro mode (Gear switch towards me).
There are some systems that do require you to land to switch between 6G and Acro mode. I don't recall if this is one that does or not... I'll try it out on mine and get back to you... So, you may not be doing anything wrong.
Please Subscribe, Like and Ding the Bell!!!