XIAOMI M365 FRONT FORK BEARINGS CLEAN AND LUBRICATION
Вставка
- Опубліковано 22 бер 2020
- Xiaomi m365 front fork bearings clean and lubrication
Xiaomi m365 чистка и смазка передних подшипников руля
If you like it, please support by buying the EP at www.northboundsound.bandcamp.com
More music and info also at: northboundsound
www.soundcloud.com/northboundsound - Наука та технологія
Cheers dude, great how too! I had notches whilst steering. Stripped down, had too straighten bottom bearing casing before re assembly. Cleaned. Re greased. Now better than new!
glad my video helped!
After driving through a pothole, my steering had a high resistance in the middle but be smooth on the left or right side so it just felt very instable. Thanks to your video, I fixed the problem in less than 2 hours (I've never done this before). You showed every detail very well.
your welcome.
Great short and clear instruction, thanks! 🙌
Glad it was helpful!
Thx for video, solved cracking front wheel/stearing problem 👌
You're welcome
el mejor video ....gracias amigo Ecuador te mira 🤘
your welcome!
Thanks for the video. My front wheel's fork got bent after crashing against a wall (don't ask), and your video helped me in taking everything apart to fix it.
Some text messages during the video would be nice. For example, when you mount everything back together, the middle screw SHOULD NOT be over-tightened because it might crush/damage the bearings. If when you turn, it feels like the wheel is "skipping" positions, then it's over-tightened. What holds the pole to the front wheel's fork is the other 2 front/back screws, THOSE should be screwed very tightly.
How bad was it bent? I hit a pole last night at full speed hammed and mine is bent all the way back the wheel is hitting the deck .. I’m hoping it’s just a bent fork stem and nothing is dicked in the stem of the scooter
@@devinjames9168 Mine was bent sideways, I don't believe it bent backwards. All I did was hold it in a bench vise and straighten it visually until the wheel fitted correctly again. Luckily nothing broke, only my pride was hurt.
Take it apart, hold the front wheel by the screws and accelerate, if it spins correctly then all you need is to straighten or replace the fork.
Oh lucky I took mine apart yesterday and I broke the fork and the bottom bearing (I hit a pole at 30km hammerd)
Excellent tutorial! Thank you :)
Your welcome 🤗
Awesome m365 repair videos! Thanks a lot for sharing and taking time. ♥️☺️👍
thanks for watching!
Thanks man!
Happy to help!
Thanks for sharing this Video!!!
Your welcome
The best thanks man!!!
You're welcome!
Hi, thank you, pour work is clean, 👍
thank you!
Turned out, I assembled wrong my scooter before. Thanks!
your welcome
Very useful, many thanks!
You're welcome!
what screw machine are u using im trying to open mine but idk what screw it is
bosch
If anybody experiences a notchy steering just loosen the middle bolt will sort the issue as I had a problem
well yeah, don't need to overtight..
Mine was tight straight out of box
Yes, I have difficulties turning right and left with my xiaomi pro 2
and what to do if the ring that limits the angle of rotation of the steering wheel has shifted. And now it turns to the right barely, and to the left very strongly. That limiter ring is so stuck that it cannot be put in place
Hammer it out from other side with strong plastic or wooden plank and put straight and hammer back over a wooden plank :)
@@RMFUNTIK that is, it should be knocked out from the bottom up?
yes, i have video on my channel
ua-cam.com/video/GX6UQoYTp2g/v-deo.html
Just to be upper and lower bearing are identical? Do you have the specs? Many thanks!
they are the same.. no I don't. but you can buy them in local bike shop.
What is the number of first allen did you unscrew?
4 or 5
Help! How long is the screw at minute 0:09,,, i lost the original one, i need to replace it because the one i have is shorter and the direction gets loose. Thanks!!
i think it's 30-35мм
@@RMFUNTIK thanks!!!
your welcome..
Could you tell me what kind of lubrication it's?
Multipurpose lithium base grease, or you can use specific bearing grease
Looks like the steering rotation lock hook is broken. Can you fix it?
yes it was broken, my client don't wan't it to be fixed.. so i didn't :)
@@RMFUNTIK can it be fixed? It seems welded on. Thanks for the video!
www.ebay.co.uk/itm/Front-fork-bowls-For-Xiaomi-M365-Electric-Car-Repair-Spare-Parts-1-Set/153988226223
This seem to be the part to replace.
@@drdayo007 it's not welded .. just hammer it out. And hammer back in.
the first screw you removed, how do you remove if its broken and stock inside?
drill out.. or use special extraction tool
@@RMFUNTIK thanks
your welcome!
Yo the little ball bearings don't stop where they're supposed to. With a little extra force the scooter turns more than it should. Will I need to buy new ones?
stopper is broken probably
Hey mate! I'm desperatedly looking for new steering bearings for my Pro 2. Do you know what number they are?
hi, they common bearings, sells in bicycle shop.. don't know really the number..
@@RMFUNTIK thanks mate! The 6002 is a wheel bearing, I don't think it'll be the same right? :)
no 6002 is a sealed bearing, you need an open bearing.. you can search in aliexpress stearing bearings or sotheming like that..
some dude fixing these told me the aliexpress stuff is way lower quality than OEM .. I ended up getting a fork off of a pro1 for about 40€
I'm stuck with getting the race off of the wheel part ..
well, anyway, hope you didn't hit yourself too back fucking up your bearing 🤣
My steering locks in the middle.
Replaced the Bearing. No difference.
Do you know where to Buy the bearing Shell and how the replace it?
aliexpress..
RefillGuy ok, found it. and how to fix it?
@@Gummikiller hammer out and hammer in...
@@Gummikiller I couldn’t find it, do you have a link ?
@@alitemel322
a.aliexpress.com/_mLe6ZuN
DOES THE LEOOUT SCOOTER USE THE SAME BEARINGS
Don't know man, I only work with original xiaomi, ninebot
@@RMFUNTIK what size are the bearings for that scooter
@@c0ntender1 I don't know sorry, you can buy them at local bicycle store, they are common
@@RMFUNTIK thanks for the info peace ✌
Just done the same as ur vid steering still notchy any suggestions
Screw to tight?
@@RMFUNTIK tried loose and tight not much difference to be honest
Can’t work it out simple setup on them
I have a pure pro never had a issue
well try to replace the bearings.. they are cheap.. couple of dollars..
I get a CLICk when accelerating and the same CLICK back when braking, it seems like it comes from the fork as it is not that famous metal on metal hinge sound. Does it ring any bells to you, what could be the problem? :)
click like a squeak? try to put some wd40 on the hinge mechanism and around it..
@@RMFUNTIK No, actually it is the connection between the pole and pole base, they are glued and this creates the CLICK sound.
Here is the video explaining it:
ua-cam.com/video/Oi75ghEYPI0/v-deo.html
i have the same, they all to, because of metal on metal.. i just use headphones on the road.. so you know.. :) spray some wd40 inside where the cable go inside the pole (remove the rubber protective patch) and spray (down inside) might help
p.s. and another that could do the noise is that plastic cover on the hinge.. to tight or it's rubbing against it self, remove it (2 parts) and test.
@@RMFUNTIK Thanks, this is what I wanted to try but afraid of WD40 eating the glue and sending me into the ditch. 😃👍
@@BojanBojovic there is screw and a pin that holds the pole together combined with glue.
I need help cuz i need a new part of that long thing on the wheel its like gray on the top guys plsss help what the name of it
say what?
😂 Grey like rest of the scooter 😂 more details please
@@tomszyb7834 😁 I have like a play list on my channel with repair.
How do I get the pole off the mechanism? I'm having trouble hammering it off, I took off all the pins but it's securely glued and pressed into each other.
I want to install a solid not folding aluminium fixed mechanism, but I don't want to use a grinder to cut it off.
there is a small pin and a screw under the plastic cover (round one)
Do you now the specs of these bearing?
These are standart bearings... you can buy them in a local bicycle shop.
Nist mit dem Fett sparen hat der meister immer gesagt
alles gut mein freund :)
Hello! Tell me bearing is so easy to get?
local bike shop should have these..
@@RMFUNTIK thanks, but I would like to do it myself
@@nikitagutsal4737 I'm telling you where to buy those bearing ..
@@RMFUNTIK
I have no problems with buying bearings
@@nikitagutsal4737 then what are you asking where to get them ?
what torque du you use? (NW)?
or anybody a tipp?
rgeards dw
❤️for the great video
by hand :D
@@RMFUNTIK ok thx😅 i will find sure something…if not by hands hehe
regards
i guess 10nm-15nm will be enough (soft alu.)
@@RMFUNTIK thx🤝
Your wheel stop is broken
i know. the scooter is not mine btw.