How To Install - Louvered Air Cleaner for CV Carburetors on a Harley-Davidson Sportster

[@mickey-eq5vw]

looks so much better when you can see more of the motor

[@trigas55]

Nice tutorial Todd
Time to lose the ham can.

[@exexpat11]

Dog Dish or 007 THE GASBOX Air Filter? Decisions decisions. I like both but I want MAX Air. 007 is larger than the Dog Dish? The Dog Dish is more restrictive?

[@jeremiahwarren1545]

What jets would you need for that filter and a set of drag pipes ?

[@vincentwagner852]

Question - for an 86 XLH883, where will the crankcase vent hose go?

[@aduveloso9153]

Thank you 👍

[@JohnHD95]

Do I need to rejet after installing that from a stock air cleaner

[@rezaarjmand7866]

1) will this work for 2001 XL1200C ?, 2) is the air filter washable ( reusable)?, 3) wouldn't oil residue frame the breathable bolt get on your cloth/ bike while riding??????

[@ilovecarnitas]

Does a gasket go between carb and carb support bracket? Or just between support and air cleaner?

[@dan1769]

Carb and Carb support bracket.

[@christopherhaas7739]

No need to reject if installing this on a stock Sporty?

[@CharlesWillisBonsai]

Probably wouldn't hurt to bump up that pilot/slow jet to a 45 since they are tuned lean from the factory

[@dan1769]

Not needed...But it's recommended.

[@mickey-eq5vw]

@@CharlesWillisBonsaii like to run a little lean it just sounds better

[@markanderson5194]

I have a shovel head with shorty e do you have a bracket for that

[@michaelbush6499]

How often if at all do you need to remove the screens for cleaning ?

[@boomerguy9935]

You won't have to worry about that, they'll be venting oily mist all the time. Your problem will be in keeping the bike wiped off.

[@victorwest8041]

@@boomerguy9935 keep oil level on the low side to avoid oil puking out of the breather screens and wash your pants often.....LOL

[@EOLVECRU]

Congratulations Very Nice

[@dannyb20vtec28]

Will this work on a 89’sporty? If not, why? Thanks in advance - Danny

[@mickey-eq5vw]

yea any sport from 84-2003 is pretty close in parts might be some subtle variations like a screw head instead of a stardrive but mainly the same

[@timmyb2507]

Any difference for EFI?

[@Lostsoulsone]

What can I do if the breather bole hole is stripped

[@xl_sam2561]

Lostsoulsone helicoil