How To Replace a Saxophone Neck Cork

Поділитися
Вставка
  • Опубліковано 21 лип 2024
  • This is a how-to video about replacing the cork on a saxophone neck.
    Here are the tools you will need if you are going to recork a lot of saxophone necks. If you are just going to recork a few necks, you will need the supplies with the "*" and you can improvise on the other supplies:
    *1/16 inch (1.6 mm) natural sheet cork Allied #A452
    Bench Peg for holding the neck while sanding Allied #T1702
    *Cork Cement Allied #A838
    Torch Allied #T5010
    Rawhide Mallet Allied #T1604
    *150 Grit Sand Paper Ferree's #H112
    *Ruler
    *Masking Tape
    *Razor
    *Paraffin Wax
    *Cork Grease
    Do you want to leave a tip so Art can continue to make more quality videos?
    TIP JAR - paypal.me/brassandwoodwindsho...

КОМЕНТАРІ • 48

  • @brianbogle5050
    @brianbogle5050 Рік тому

    Thanks for this. All of my local techs have moved away so I'm goin to try this one by myself. Your video made the most sense of any.

  • @LaurasLastDitch
    @LaurasLastDitch 7 років тому +1

    There was something very satisfying about watching Art put the cork on the saxophone neck. Good job, Art!

    • @WLeo-kz5yy
      @WLeo-kz5yy 7 років тому

      Laura's Last Ditch Vintage Kitchenwares I was thinking the same thing and he isn't even my brother lol. . . Great job Art!

  • @jonniewadd56
    @jonniewadd56 5 років тому +6

    Okay, I'm good to go. Many videos for this on YT, but this one is my definite choice to use for replacing my neck cork. Thanks!!

  • @kimberlymayo9951
    @kimberlymayo9951 7 років тому +2

    Kind of interesting to see things that are not in your daily life. Thanks for sharing your passion. 😊

  • @jenniferrooney9390
    @jenniferrooney9390 7 років тому +9

    I have no need for this but I'm a Parsnips and Parsimony subscriber and your vlog wasn't up yet LOL. I must say you did a great job. Very easy to follow and understand.

    • @luannfleck6848
      @luannfleck6848 7 років тому +1

      Looks like hard work

    • @alext9067
      @alext9067 5 років тому

      I agree. I was watching a guitar repair video yesterday and I don't know what he was talking about. These videos are explained extremely well.

  • @kennethgsaxrepair38
    @kennethgsaxrepair38 6 років тому +1

    Thank you very much for sharing this! I have never heard of the paraffin wax application prior to cork grease and the tape trick is brilliant! thanks to you!! : )

  • @colincrichton
    @colincrichton 5 років тому

    Thanks sooo much for posting this video! The instructions were very clear. Actually quite surprised how easy it was to do myself. All the best! Colin 😀

  • @joannayeo9545
    @joannayeo9545 7 років тому +1

    Excellent tutorial Art, so clear and easy to understand. I don't actually play a musical instrument but this was really interesting to watch. Wishing you and your family many blessings with all of your various projects x

  • @nathanpillsbury2631
    @nathanpillsbury2631 5 років тому +1

    what a great tip to use the tenor piece as a guide!

  • @faner255
    @faner255 4 роки тому +1

    thanks man, all the other videos i have watched didnt explain as good as you did

  • @s.m8766
    @s.m8766 3 роки тому

    awesome! I love the trick with the masking tape! :)

  • @AprilHollySmith
    @AprilHollySmith 7 років тому +1

    New desk carpet looks good!

    • @jonniewadd56
      @jonniewadd56 5 років тому

      Funny what the female gender notices!! LOL.. I didn't notice the nice berber
      carpet ;)

  • @tracywebuyhomes7840
    @tracywebuyhomes7840 7 років тому +3

    Very interesting, you make it seem easy but I'm sure that cork can try your patience at time.

  • @lesleyoliver5582
    @lesleyoliver5582 7 років тому +1

    Neat job. Your such a patient person. It would be interesting to do your story because it isn't a common profession (probably many wouldn't even know of it).what initially brought your attention to this, how've you started etc. thanks from Australia

  • @karynb7781
    @karynb7781 7 років тому +1

    I would title this video 'Lucky Sax Owner ~ Gets A Quality New Neck-Cork!' I think they'll have No Worries! So Nice.

  • @richardwerblow2106
    @richardwerblow2106 7 років тому +1

    Art is the best!!

  • @Doggo_Norse
    @Doggo_Norse 4 роки тому +1

    Very helpful thank you for this

  • @cherylblais9611
    @cherylblais9611 7 років тому +1

    I'm also a Parsnips and Parsimony subscriber. I have great respect for your craft! Please tell us how you came to have an interest and gain the knowledge for what you do! I grew up playing the flute throughout school. Sadly I no longer have one.

  • @elizabethwilliams1523
    @elizabethwilliams1523 7 років тому

    I subscribe to parsnips and parsimony. like that Chanel. loved watching you work on the sax. very interesting

  • @davemiller7633
    @davemiller7633 2 роки тому

    What you just did in 5 minutes would take me a lifetime

  • @javierquesada798
    @javierquesada798 Рік тому

    I hope you are well teacher

  • @Lee.M.Easton
    @Lee.M.Easton 3 роки тому +1

    "Blow out the flame of course"

  • @daddycavefish
    @daddycavefish 4 роки тому

    what is a good cork to use, what suppiers, also i heard some rumours of neoprene cork for necks thanks

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  4 роки тому +1

      Most band instrument suppliers have good sheet cork. I get mine from Allied or Ferree's Tools.
      You can look up Ferree's at ferreestoolsinc.com

  • @chrisdeecaregiver2
    @chrisdeecaregiver2 7 років тому +1

    Really interesting . Do you only repair all types of instruments? I have a trombone (it was my Dad's and it's over 60 years old.) Are these worth repairing? I heard that there isn't much interest in trombones anymore. What do you think?

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  7 років тому

      I repair all brass and woodwind instruments. Trombones have been very popular for the past few years. In fact, I am running low on them. A 60 year old trombone may or may not be worth repairing. It just depends on the condition.

    • @chrisdeecaregiver2
      @chrisdeecaregiver2 7 років тому +1

      I don't think there's anything wrong with it. It hasn't been out of the case since the 1950s. Dad had requested that I donate it to a school district but if it's worthless, I don't want to do that. If I were to email a picture of it, long with the makers name could you tell me if it's junk or???

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  7 років тому

      You can send a picture to Art's business email and he can take a look at it. thebrassandwoodwindshop@hotmail.com

  • @user-lz3qe1dm2m
    @user-lz3qe1dm2m 11 місяців тому

    I need to buy *Cork Cement, i'm from vietnam...help me please

  • @syamambaram5907
    @syamambaram5907 Рік тому

    Can you please tell me the name of the glue to stick it

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  Рік тому

      It is contact cement. You can get it from Ferree's Tools or your local hardware store.

  • @czarinc.6971
    @czarinc.6971 3 роки тому

    iv'e been told that the brass is a layer of paint on the metal and that using flame will leave carbon stains inside the neck... help

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  3 роки тому

      It sometimes does leave some marks, but they are easy to clean with a cloth and a flute cleaning rod.

  • @germygon60gonzalez2
    @germygon60gonzalez2 3 роки тому

    What cane of glue can I use?

  • @kennethgsaxrepair38
    @kennethgsaxrepair38 6 років тому

    I know you are very busy, but if you could share a video teaching how you regulate the linked keys on the saxophone (i.e. G#, Bb, A, bis), it would be very helpful, because I am currently wrestling with getting these keys perfectly synchronized. I am getting there, but it is taking a long time and there must be a better way that I'm not aware of. : )

    • @TheBrassandWoodwindShop
      @TheBrassandWoodwindShop  6 років тому +1

      That can be a little tricky, but it is very do-able for anyone who has a little mechanical ability.
      I will try to get a video on soon, but it will probably be another week or more before I can do that.
      Thank you for watching and feel free to ask any questions and make any more suggestions about videos you would like to see.

  • @jpig6
    @jpig6 3 роки тому

    You didn't address the different lengths to allow for the conical shape of the neck - this is reallly important and I'm not clear on this

  • @haesolpark1062
    @haesolpark1062 4 роки тому +1

    lol Gaylord ruler where did this come from