@@MMusa-gy7qb The way that I would tackle this, first try to hold the glass with a good tape, and try to some how to cut or dismantle the mechanism inside the regulator to get the window loose to be able to bring it down and remove the bolt, and then remove the regulator.
So the window doesn't come down at all?....what about the othe side?. Make sure the fuse for that window is good. Just to make sure the window is getting power.
@@kaimanson3174 yeah, I tired changing the two 7.5 fuses and the 20 for that designated door in addition to changing the relay. The fuse panel has power idk if the window gets I haven’t tested it yet
@@rajsieunarine8436 next step is to try this if you want. ua-cam.com/video/p-zFMHMIlWk/v-deo.html If you are sure the regulator is getting power then most likely the regulator is toast.
Good question, but the most of the units (used) come together with everything and sometimes the issue is not the motor but the whole cable mechanism. To make the repair faster and convenient replacing the whole unit at once give you more peace of mind.
Great video. I am trying to change the window gasket. I couldn’t figure out how the door handle was held on. Nice rag trick on the clip.
Happy to help 👍 the rag is the best way to go...just need to keep an eye on that flight clip.
Thanks! Well done video without a lot of garbage commentary. Especially appreciated the screen adds showing the purpose of cables, etc.
Thank you, happy to help 👍 yeah those wires if not well identified can get u in trouble. Any question please feel free.
Kool very Cool
Happy to help
My problem is the regulator doesn't work , so how do i bring the glass down to be able to remove the bolts holding the glass?
Otherwise good video
@@MMusa-gy7qb The way that I would tackle this, first try to hold the glass with a good tape, and try to some how to cut or dismantle the mechanism inside the regulator to get the window loose to be able to bring it down and remove the bolt, and then remove the regulator.
So my issue is my window doesn’t go down 0-0, in pretty sure it the window regulator but not sure on how to change it
So the window doesn't come down at all?....what about the othe side?. Make sure the fuse for that window is good. Just to make sure the window is getting power.
@@kaimanson3174 yeah, I tired changing the two 7.5 fuses and the 20 for that designated door in addition to changing the relay. The fuse panel has power idk if the window gets I haven’t tested it yet
@@rajsieunarine8436 next step is to try this if you want. ua-cam.com/video/p-zFMHMIlWk/v-deo.html
If you are sure the regulator is getting power then most likely the regulator is toast.
Could you have just replaced motor?
Good question, but the most of the units (used) come together with everything and sometimes the issue is not the motor but the whole cable mechanism. To make the repair faster and convenient replacing the whole unit at once give you more peace of mind.
I'm with you, unless I can see the cables are physically damaged, I'm just going to replace the motor.