Freightliner cascadia not cranking and starting Mcm Cpc Tcm not connecting with computer
Вставка
- Опубліковано 7 сер 2024
- 2015 Freightliner cascadia , when plug in computer to diagnose fault codes , it doesn’t show any mcm cpc and tcm connected to computer, checked battery wiring and fuses than I end up finding bad wiring on Sam cab plug x19 . Tried yo bypass the starter relay it start the truck but truck shutdown even you turn key off , so had to fix it properly for customer. But if you oh v stuck somewhere you can pass the relay that shown in video with loop wire to make to your destination and fix it than . Hopefully they might save your day for someone. Have great holidays be safe everyone
- Авто та транспорт
Thank you for the insight.
Thanks for the info!
Thank you very much.
I’m having the same problem now was driving truck shut down with active breaking system unavailable towed it to yard put computer on it said cpc so I changed the cpc now it’s saying no communication with tcm and abs no gears on dash been at this for four days still can’t the problem
Tnks that info
Wow nice
Thanks for the feedback to my work
Deoxit D5 is the only hope for that truck. If that don't fix it then all new harness.
Yeah i actually suggest them to replace the harness for avoid problem in future
🎉🎉🎉🎉
Was there a check light on the dash?Any code?
Yeah check light and codes were for mcm and cpc no communication codes and no start and when I plug in ddl it wasn’t showing mcm and cpc and tcm etc
Cascadia with cummins. Has a code for j1939 500k. No crank from the key. You can start it by shorting the starter. Help me guys
My wire harness has been checked in good condition. MCM Still no communication
What did you do to solve it i have the same issue thanks, says CPC4 diagnostics issue
Freightliner keeps this BS in there trucks for some reason. Theres no reason anything should affect a truck to start unless the starter is blown. Scam cadia i lost everything because of this.
Window leaking
Junkiest truck ever built, dodge wiring harness, i own one, fixing to scrap the POS
Agree with that