Thank you very much, for your answer, I understand that if the coils are mounted on the pipe and facing each other, my question is if the power that comes from the drive unit of the transmitter coil is for each of the coils by individual, or a single supply for both, that is to say in series the two coils and what voltage they receive the recommended one.
I have abb magnetic flow meter note, in that note "two coils are connected in series". And as per my knowledge magnetic field strength depends on fluid conductivity, if strong field required then ac source is used, and normally coils are connectec in series but corrent direction in both coils must be same so one coil acting as a north pole and one coil acting as a south pole.
May be in next week i will upload one video. From last Oct 20 i was change my job, presently i am so much busy. So i have less time to make new video. Sorry for that. But i will upload
Coil not go around the pipe. Coils are placed opposite to each other, and coils are connected to coil drive unit in transmitter, and supply depends on how much magnetic field strength needed. These all information as per my knowledge, if i am wrong then guide me. Thanks for comment.
Hello, i want ask how is measured the voltage? I particularly understand that positive particles are sent to one electrode and negative particles are sent do another electrode, so electrons are sent to one conductor and to the another conductor is sent what? I don't understand what determines that one electrode is anode and another electrode is cathode.
If you watch and listen video carefully, then i said length of the cinductor is equal to distance between two electrodes. And this electrod distance is equal to diameter of pipe inside wall.
Well explained with awesome visualisation through animation.
Thank you!
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
Thank you sir ji
Good explanation ...👍
Supper se bhi upper,.....
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
Very very very helpful video thnkas a lot
Bhai bohoj aacha video he
BAHUT BAHUT DHANYA YOG SIR🙏🙏
Thanks sir. MASS FLOW METER K BARE ME VIDEO BANAIYE SIR
As per your request, mass flow meter video ready
Nice information. sir, let me know the selection procedure of coil & electrode.
good work bhau
Thank u very much....
Kam Cho Prakash Bhai
Good work 👍 I am Rahul from surat
Fine.
Super explained !
Thanks. I try to explain in simple word and simple language.
Thank you very much, for your answer, I understand that if the coils are mounted on the pipe and facing each other, my question is if the power that comes from the drive unit of the transmitter coil is for each of the coils by individual, or a single supply for both, that is to say in series the two coils and what voltage they receive the recommended one.
I have abb magnetic flow meter note, in that note "two coils are connected in series". And as per my knowledge magnetic field strength depends on fluid conductivity, if strong field required then ac source is used, and normally coils are connectec in series but corrent direction in both coils must be same so one coil acting as a north pole and one coil acting as a south pole.
I understand, thank you very much
Thank you so much sir 😌
Great explain
Is there magnetic flow meter indian manufacturing with scada system?
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
Primary head a multimiter a kia paiga sir
Why not u making new video sir g.. Your video help us a lot for our improvement Ans good understanding.. So please please make video
May be in next week i will upload one video. From last Oct 20 i was change my job, presently i am so much busy. So i have less time to make new video. Sorry for that. But i will upload
@@instrumentationforyou8273 thanks a lot sir for your humble response towards us
Please make full video on positive displacement meter and level topics also
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
👍👍👍
The coils that go around the pipe must be connected in parallel or in series?
you can be given 12vdc
Coil not go around the pipe. Coils are placed opposite to each other, and coils are connected to coil drive unit in transmitter, and supply depends on how much magnetic field strength needed.
These all information as per my knowledge, if i am wrong then guide me.
Thanks for comment.
👌
Electrod ki madhyam se kitna volt mil jata hai?
Hello, i want ask how is measured the voltage? I particularly understand that positive particles are sent to one electrode and negative particles are sent do another electrode, so electrons are sent to one conductor and to the another conductor is sent what? I don't understand what determines that one electrode is anode and another electrode is cathode.
How come that when we remove the magflow meter it doesnt communicate or no device found
We power it up out of the system or out of the loop?
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
F181 error came what is the reason
Coil ko kitna voltage diya jata he ??
Depends on fluid conductivity, for low conductivity high magnetic field required,
Voltage kitni range me ho sakte he ?
Koy example de sakte ho ??
Dc 24v, 110vdc
Ac 230v, 110vac, manufactured defined and also note down on name plate of magnetic flow meter
Read manual : endress + hauser promag 50, name plate detail section
เอาไปใส่ในหลอดเลือดหัวใจได้คงดีคับ
ตัวเล็กๆ กล้องยังทำได้เลยคับ
ต่อสัญญานมาที่สมาร์ตโฟน
เรารู้อัตราการไหลเวียน มันวัดความเข้มข้นโลหิตได้ดี ต้องกินน้ำแล้ว เลือดเริ่มหนืด😂😂😂🎉
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
Display measurements how to calculate sir
Coil electrode voltage ac are dc voltage
ua-cam.com/video/UpADHeMzPiI/v-deo.htmlsi=aQbLY0cGNq7OuDDj
Sir mera b.tech instrumentation hai. Khi job milega?
Where are you from
Equation mein L gayab kar dia bhai
If you watch and listen video carefully, then i said length of the cinductor is equal to distance between two electrodes. And this electrod distance is equal to diameter of pipe inside wall.
Sir
How its became
E= k. B. (D). 4Q /pi d2
L became d
Pls explain me sir
Bit confused
Length of fluid in pipe =inside diameter of pipe
Sir agar length or diameter different ho tw us hisab sy formula bana k calculation kar sakty hain kia is tarah possible hai?? Actual main
Hello sir apna mobile no digiye sir
Sorry its personel, comment me.
Nice information. sir, let me know the selection procedure of coil & electrode.
Selection is done by vendors. i think, they choose coil supply as per liquids conductivity,