To keep the display cycling over the three modes, switch to the temperature mode and press and hold the Mode button. To keep the time display only, repeat the same steps.
@Yoram_Janashvili While in the normal mode, press "mode" button twice, then long press it until you hear a beep. You could also try removing the batteries and unplugging the clock for a few minutes. This may reset its settings. You'd just then need to reconfigure it.
To keep the display cycling over the three modes, switch to the temperature mode and press and hold the Mode button. To keep the time display only, repeat the same steps.
hiii i just got this clock and can i connect it directly to the wall with a transformer plug ? bc it says 5V and idk about electicity or plugs and i don't have any usb on the wall close to my bed table
Hi, if you need continuous time display, the usb power cable must be connected. Otherwise the display will turn off and the time will be displayed after pressing the button.
Hi, change celsius to farenheit like this: switch to the thermometer, press the mode button and then press the down button. And it's done. The night mode is used to automatically mute the display at night.
Hi, yes it can be switched. Press the mode button, the temperature will be displayed in degrees Celsius, if you want to switch to degrees Fahrenheit, press the down button.
the display is way too bright for the bedroom even in low brightness setting...did you find any way to make it dimmer other than placing a sheet or film over it? Thanks
---Link with price is in video description---please subscribe ❤
To keep the display cycling over the three modes, switch to the temperature mode and press and hold the Mode button. To keep the time display only, repeat the same steps.
Hi, thank you for your response and your advice
Doesn't work for me, what am i missing?
@Yoram_Janashvili
While in the normal mode, press "mode" button twice, then long press it until you hear a beep. You could also try removing the batteries and unplugging the clock for a few minutes. This may reset its settings. You'd just then need to reconfigure it.
@@O.Salah1
Thanks man, im all over it.
A clock like that would look good anywhere... Even as a functional decoration...
Hi, yes this is nice functional home decoration 🙂
I have this clock, my wife is delighted, thanks for the tip
🙂 Thank you for your response 🙂
How she can use it ????
Is there a to stop the screen from going off? Like how the time on display permanently
Hi, if you want to have the time displayed permanently, you have to connect the device to the mains via a usb adapter.
Aww man 😔
To keep the display cycling over the three modes, switch to the temperature mode and press and hold the Mode button. To keep the time display only, repeat the same steps.
@@jopochanneltvDoesn’t work for me, maybe you have any idea why?
@@Aleks-my8kr there is a light sensor, you have to be in the dark
hiii i just got this clock and can i connect it directly to the wall with a transformer plug ? bc it says 5V and idk about electicity or plugs and i don't have any usb on the wall close to my bed table
Hi, I have this watch connected via a USB adapter from an old mobile phone.
@jopochanneltv thank uuuuuuuu
What will happen if we remove the usb cable ? Or it should be connected always
Hi, if you need continuous time display, the usb power cable must be connected. Otherwise the display will turn off and the time will be displayed after pressing the button.
If i use with 5v usb power without any battery, what happened if i discounted the power, the time remain store or reset itself?
Hi, if there is no battery in the device and the power from the mains is turned off, all data will be reset.
@@jopochanneltv and which cell use for this rechargeable or non rechargeable?
@@umerarshad100 Hi, it doesn't matter what kind of batteries you use. I recommend alkaline.
How do I change the temperature from Celsius to Fahrenheit? And what does the night mode on and off do?
Hi, change celsius to farenheit like this: switch to the thermometer, press the mode button and then press the down button. And it's done. The night mode is used to automatically mute the display at night.
can I change the temperature as fahrenheight instead of celius? if yes, how
Hi, yes it can be switched. Press the mode button, the temperature will be displayed in degrees Celsius, if you want to switch to degrees Fahrenheit, press the down button.
How do you make the clock 12 hours instead of 24 hours?
Hello, hold the MODE button, set the hours, set the minutes, and then you can set 12 or 24h with the UP and DOWN buttons. It's very simple.
Thank you friend!
Thank you for your response 🙂
When I set the alarm, it shows 05 and then T- D or something. What do those mean?
Hello. The number 05 is the time to snooze the alarm clock. It means 5 minutes.
What is the night mode for?
Hello, the night mode is that you can dim the display backlight so that it does not disturb your sleep at night
The screen turn into sleep mode after few seconds. How to solve it?
Hi, if you want to use the continuous time display, you have to connect the alarm clock via a usb adapter. This is not possible with batteries.
@@jopochanneltv Ok
Thank you !
@@anoopgcm 🙂
Does it contain history? ddmm
Hi, if the battery is inserted, the time will remain in the memory after disconnecting the USB cable. This alarm clock does not have a date function.
I mean the day and month, is it available?
@@hazem_krb No, mate. Only time and temperature
@jopochanneltv
ok thank you 😊
How to set it to Am ?
Hi, see the comments below the video.
All 3 are getting displayed one after the other, time, date and temperature, how to change it to show only time?
Hi, do you have the same digital clock alarm as in the video? because mine keeps showing the time. Time does not change with date and temperature.
I have the same problem, there's any solution?
the display is way too bright for the bedroom even in low brightness setting...did you find any way to make it dimmer other than placing a sheet or film over it? Thanks
Hi friend. Sorry, but I can't advise you on this.
Alguien sabe como ponerlo en AM y PM?? Por favor, ayuda 😢
Hi. When setting the time, choose the 12-hour instead of the 24-hour.
@@jopochanneltv Gracias 🥺 Pero solo funciona para PM y sigo sin ponerlo en AM
@@danielapertuz9928sigue subiendo de número hasta que desaparezca el PM
How to set the alarm؟
Hi, press the ALARM button for 3 seconds. and set the alarm time. If the AL symbol is displayed, the alarm is activated. See my video review.
Por que mi alarma no suena?
Hello, do you have alarm set and activated?
Even though after connecting it to usb adapter, the display still turns off
Please help
Hi, sorry I can't help you. I don't know why it doesn't work properly.
@@jopochanneltv okay
Thank you for the reply ❤️
Mi reloj no para de sonar lo tengo conectado por usb alguien sabe porque?
Hi, sorry friend, I can't help you with this
Clock light only stay on for 13 seconds.. please help
If you want a continuous time display, you have to connect the alarm clock via a USB adapter. This is not possible with batteries.
i already tried using the usb adapter and it still isnt continuesly on,any help?
Same here :(
Ти не мой
👍