Revell 1/32 Supermarine Spitfire Mk.II - Part 1

Поділитися
Вставка
  • Опубліковано 6 січ 2018
  • Part 1 of the beautiful Spitfire. This part features cockpit, fuselage and wing construction
  • Розваги

КОМЕНТАРІ • 43

  • @ernietrigg5379
    @ernietrigg5379 4 роки тому

    Thank you for your very helpful video. My Revell Spitfire kit has now arrived and I will be referring back to your video as I work through the build.

  • @normanstrath6636
    @normanstrath6636 Місяць тому

    The camera is not centre so you cannot see the great work you have done

  • @Looney2ing
    @Looney2ing 6 років тому +3

    Epic intro. Loved the movie. To bad the spit in Dunkirk fired over 70seconds... over 3 times to much. Love your vids

    • @modart6339
      @modart6339  6 років тому

      Well funny enough i did think that 😂

  • @FargoScaleModels
    @FargoScaleModels 6 років тому

    Looks great man

  • @xavier9608
    @xavier9608 2 роки тому

    Thanks ! Great helpfull video !!!

  • @jimmclaughlin2728
    @jimmclaughlin2728 3 місяці тому

    just started this kit and how I had forgotten how bad revell kits are. ill fitting parts, flash and panel gaps. still I will perservere

  • @duckman5642
    @duckman5642 5 років тому +1

    Great vid, just bought one 22quid from Hannants, cheers

  • @kylemoffat1258
    @kylemoffat1258 3 роки тому

    lovely kit, building one myself.

  • @druide10
    @druide10 7 місяців тому

    Nice build . But i have the same large gap with the wing section and the fuselage.
    👍

  • @miguelstevens3042
    @miguelstevens3042 5 років тому +2

    Thanks for this, How do you know for sure which parts need to be painted, aka which parts will be visible after the model is done, and which won't? Do you base it pure of the manual?

  • @EMTBAFV
    @EMTBAFV 3 роки тому

    Great just looking at the cutting matt lol

  • @MottysMilitaryModels
    @MottysMilitaryModels 6 років тому

    Looking brill matey ! Question for you , do you think you could add this build to say a 1/35th diorama or can you tell the difference in scale

  • @maartendezwaan9715
    @maartendezwaan9715 4 роки тому

    Great video but patience mate patience.. Wait till the glue is set a bit

  • @miguelstevens3042
    @miguelstevens3042 5 років тому

    Love the orange chair and the seat belt! Is that included by default? I don't see it on my Revell Spitfire Mk.IVc 1/32

  • @MrAndybob71
    @MrAndybob71 4 роки тому

    Hi really great vid just bought kit myself. Csn you recommend a varnish as never used before have ordered weathering paint love the effect ot have many thanks

    • @eddiegremlin
      @eddiegremlin 4 роки тому

      MrAndybob71 Vallejo clear gloss and clear matt are resistant to enamel thinners.

  • @billfrater1948
    @billfrater1948 5 місяців тому

    Should include a Pilot.

  • @lawrencereid9375
    @lawrencereid9375 6 років тому +11

    Did you realize that all your great work on the instrument panel went for naught as far as your viewers are concerned? You had the piece(s) out of camera in the foreground and unable to be seen. Pity.

  • @jacksarson9230
    @jacksarson9230 3 роки тому

    Sorry to spoil the news but ya called the elevaters the ailerons

  • @thesteamingbean.
    @thesteamingbean. 5 років тому

    You painted the cockpit pieces then glued them. Did the glue not hurt your build?

  • @eddiegremlin
    @eddiegremlin 4 роки тому +2

    Did you forget the tail wheel?

  • @robbeard6929
    @robbeard6929 3 роки тому

    Glue won't stick to paint, the glue is a solvent to melt the plastic. Where the glue is you need to remove the paint mate.

  • @vindicari
    @vindicari 4 роки тому

    wish revell would use a box with a top instead of these open side ones.

  • @ArmourEmpire
    @ArmourEmpire 6 років тому

    Off to a flying start. Kutgw

  • @davidharrington1133
    @davidharrington1133 9 місяців тому

    Did not see any details of the controls, off camera

  • @chrislampard7170
    @chrislampard7170 Рік тому

    Can't be bothered to cycle through everything beforehand but what about part 186 x 2, where do they gp?

  • @user-fq1ot3dc3o
    @user-fq1ot3dc3o 6 років тому +1

    показывай какую используешь краску. какие цвета

  • @markshellard5894
    @markshellard5894 4 роки тому

    Square peg in a round hole that seat frame

  • @SpeeedyZach
    @SpeeedyZach 4 роки тому

    What paints did you use? I cant find the Revell paints here in the US

    • @jacksonhudd3681
      @jacksonhudd3681 4 роки тому

      Zach Crosby use Tamiya XF-52 flat earth, XF-81 dark green 2 (RAF) and AS-11 or equivalent XF paint. Hope this helps

  • @olivercooney6645
    @olivercooney6645 4 роки тому

    What on earth is the building most of it off camera

  • @_norwegian_pl7116
    @_norwegian_pl7116 3 роки тому +1

    I would like to buy one myself and I dont know if there are paints in this kit already or do I have to buy paints myself. If someone could answer I d be very gratefull. ;)

    • @modart6339
      @modart6339  3 роки тому

      Paint are not in the kit when purchased. Hope can be of help :)

  • @robbeard6929
    @robbeard6929 3 роки тому

    Why are you putting glue on paint, it will not melt the plastic.

  • @chriswalker2858
    @chriswalker2858 4 роки тому

    Bright orange seat? Should be Bakelite brown if Mark ll or aluminium if mark l. Sorry to say but a bit of a clumsy build and you need to improve your camera placement.

  • @stevenpuderbaugh821
    @stevenpuderbaugh821 2 роки тому

    You lost me by not being able to keep your exposition of the cockpit and instrument panel on camera. You didn't review your filmed segment before posting it. Poor editing.
    Sorry, but that was my honest take of the first part of your video.