How to replace the ink cartridges in an HP PageWide Pro MFP 477dw

Replacing the ink cartridges in an HP PageWide Pro MFP 477dw is a straightforward process. Here's a step-by-step guide:
Step 1: Turn on the Printer
Ensure that the printer is turned on before starting the replacement process.
Step 2: Access the Ink Cartridge Area
Open the ink cartridge access door located at the front of the printer. This door is usually found on the right side of the printer.
Step 3: Remove the Old Cartridge
Wait for the ink cartridge carriage to stop moving.
To remove the cartridge, press the front of the cartridge to release it, and then pull it out of its slot.
Step 4: Prepare the New Cartridge
Take the new ink cartridge out of its packaging.
Remove any protective tape or covers from the cartridge (if present).
Step 5: Install the New Cartridge
Slide the new ink cartridge into the correct slot in the printer. Make sure it clicks into place.
The cartridge slots are usually color-coded, so match the color on the cartridge to the color label on the slot.
Step 6: Close the Ink Cartridge Access Door
After all the cartridges have been replaced, close the ink cartridge access door.
Step 7: Align the Printer (if prompted)
The printer may prompt you to align the printhead after installing the new cartridges. Follow the on-screen instructions to complete the alignment Step 8: Check the Cartridge Status
On the printer’s control panel, check the ink levels to ensure that the new cartridges are recognized and full.
Your HP PageWide Pro MFP 477dw should now be ready to print with the new ink cartridges. If you encounter any issues, refer to the printer's manual or support documentation.

[@purefixing5681]

Thanks for the video but these cartridges are very expensive daug