Brilliant information, my engine wasn’t going forward, just into neutral and reverse, took the gearbox apart n fixed what I thought was the problem but after assembling it back it now goes into neutral and forward but not reverse, I’m starting to think it may be something todo with the shift shaft?
Hey great video and very informative as always! I a quick question, my outboard when going into reverse won’t click in as usual so the RPM increases as I put back the throttle and then she clicks into reverse at high RPM. Have you any experience or solution with this problem? Iv only had the boat on the water two days and my heart is broken 😅🫣
I have a 115ETLJ and in the rear I have a nipple 6E5-45378-00-00 with a hose 90445-07MF2-00 connected to it and is closest to the gear shaft. When I was changing the Impeller I had to disconnect this hose when pulling out the lower unit and was wondering what this hose connection was for.
It is very likely that you have a bad tooth in a crown, the noise when entering the gear is normal, but it should not sound when it is in operation, take a look, before the damage is greater ua-cam.com/video/ChbkfBZ9gkI/v-deo.html
@@rogermuir5609 Yes if your Idle rpm is set a little high or air temp is cooler it will runs a bit faster and will grind when shifted into gear. Try lowering the idle screw on your carb.
Muy bien explicado, por fin me entero de como funciona!!! 👌
Gracias amigo!
Muy ingenioso el sistema, por eso suena el cambio cuando mete marcha atras!!
Asi es , por eso se oye el clonk
Brilliant information,
my engine wasn’t going forward, just into neutral and reverse, took the gearbox apart n fixed what I thought was the problem but after assembling it back it now goes into neutral and forward but not reverse, I’m starting to think it may be something todo with the shift shaft?
it probably has to do with the shift shaft, but check that the routing of the shift cables is correct and without sharp bends
@@JavierRullanRuano thank you man 👍
Excelente video y muy ilustrativo , los felicito
Muchas gracias
@@JavierRullanRuano a vos y segui con las publicaciones
@@JavierRullanRuano Saludos desde Salta Argentina
how to remove case gearbox
Hey great video and very informative as always! I a quick question, my outboard when going into reverse won’t click in as usual so the RPM increases as I put back the throttle and then she clicks into reverse at high RPM. Have you any experience or solution with this problem?
Iv only had the boat on the water two days and my heart is broken 😅🫣
Is there any brass or copper used in this lower unit? Just wondering because i want to use gl 5 gear oil in my yamaha but in calls for gl4 gear oil
Gracias,en mi opinión es el mejor sistema de todos
Merci beaucoup ❤❤❤❤
Mesin Suzuki 115 , sama ya pak susunannya
The axle is bent due to impact
Maybe
Muy interesante amigo!!!
Gracias!
how do we install shift cam back into gear?
I have a 115ETLJ and in the rear I have a nipple 6E5-45378-00-00 with a hose 90445-07MF2-00 connected to it and is closest to the gear shaft. When I was changing the Impeller I had to disconnect this hose when pulling out the lower unit and was wondering what this hose connection was for.
Muy muy bueno
Gracias!
How to full the gear out
Thanks bro
You are welcome
do i have to have dent spring in a 1975 25 HP evinrude
My Yamaha 2 stroke makes noise going into reverse like grinding I heard that’s normal is that true?
It is very likely that you have a bad tooth in a crown, the noise when entering the gear is normal, but it should not sound when it is in operation, take a look, before the damage is greater
ua-cam.com/video/ChbkfBZ9gkI/v-deo.html
It’s only when I shift it into reverse that is normal?
@@rogermuir5609 Yes if your Idle rpm is set a little high or air temp is cooler it will runs a bit faster and will grind when shifted into gear. Try lowering the idle screw on your carb.
Hi boss,this gearbox sale me,I want made video.
yes if you want, send me a PM
@@JavierRullanRuano Hi,boss,How Manny price?from Bangladesh.
@@azadrahman5270 send me a PM
Harga torpedonya brapa kk
🤔👍