DIY - Power Supply using XL6019 (Upgrade XL6009)

Поділитися
Вставка
  • Опубліковано 3 лис 2024

КОМЕНТАРІ •

  • @slavoljubristic7876
    @slavoljubristic7876 Рік тому +1

    Is it possible to install two LEDs, green and red, to show when charging is in progress and when the battery is charged

  • @slavoljubristic7876
    @slavoljubristic7876 Рік тому

    Is it possible to install two biger LEDs, green and red at the box to show when charging is in progress and when the battery is charged

  • @matrixredwood4817
    @matrixredwood4817 2 роки тому +1

    Guys
    Don't use hot glue to mount the converter board
    Because of the heat when the board is functioning the hot glue might melt

    • @Thecarverman
      @Thecarverman 2 роки тому

      Might might hahahhaah lol mate it does will its not a matter of if its a matter of when if you do use hot glu place a dab under the potentiomtre and no where epse that way it will never move

  • @Leandroroque157
    @Leandroroque157 2 роки тому +1

    Does it have short circuit protection?

    • @vetalveral8920
      @vetalveral8920 Рік тому

      Unfortunately, there is no short circuit protection and current adjustment with its stabilization.

  • @orlatris96
    @orlatris96 4 роки тому +1

    Muito bom, obrigado pela partilha. Apenas fiquei com uma dúvida, alimentou com 12V e tem 30V na saída?

    • @VINInvents
      @VINInvents  4 роки тому +1

      Yes : ) I use a buck-boost converter, so it can output 30v with low volt input

    • @orlatris96
      @orlatris96 4 роки тому +1

      @@VINInvents the buck-boost converter, LX 6019? WHAT IS THE MAXIMUM AND MINIMUM INPUT? AND OUTPUT?
      Thanks a lot for the help. greetings

    • @VINInvents
      @VINInvents  4 роки тому +1

      @@orlatris96 XL6019, the output is approximately 1.3 to 35vdc

    • @orlatris96
      @orlatris96 4 роки тому +1

      @@VINInvents thanks

    • @kamalkant381
      @kamalkant381 3 роки тому

      is this better than xl6009?

  • @egorgozdak9767
    @egorgozdak9767 2 роки тому

    Здравствуйте скажите пожалуйста,мне очень понравилась ваша бор машинка! Ваш инструмент! Где вы его покупали, можно ссылку?

    • @nicedick4697
      @nicedick4697 9 місяців тому

      нельзя вась

    • @nicedick4697
      @nicedick4697 9 місяців тому

      на английском спрашивай дцп

  • @babali7588
    @babali7588 3 роки тому +1

    Obrigadi for video. I've got a question. You use Xl6009 and I know that device max gives 3A. Is it enough for your project? because looks like low to me.

    • @VINInvents
      @VINInvents  3 роки тому

      Its only to power for low projects..
      I made a new power supply, I will be posting it by next week

    • @babali7588
      @babali7588 3 роки тому +1

      @@VINInvents I'm going to wait for the video. Which device you will use on your project? Which circuit?

    • @VINInvents
      @VINInvents  3 роки тому

      @@babali7588 XL4016

    • @VINInvents
      @VINInvents  3 роки тому

      I have already uploaded a new video

    • @babali7588
      @babali7588 3 роки тому +1

      @@VINInvents thanks I'll look

  • @GieX_DIY
    @GieX_DIY 2 роки тому

    Perfect

  • @ganeshmurthy4860
    @ganeshmurthy4860 2 роки тому

    Excellent.

  • @KHOAIHOANG81
    @KHOAIHOANG81 2 роки тому

    Very Good...!!!

  • @nasihin4729
    @nasihin4729 3 роки тому

    Itu bola lampu pln?

  • @arjochip
    @arjochip 3 роки тому

    Skema yang 3 pin out donk biar mengukur ampernya terpisah

  • @delta7id
    @delta7id Рік тому

    Box ukuran X berapa ?

  • @dedyadymanurung1387
    @dedyadymanurung1387 3 роки тому

    Bang,untuk menaikkan tegangan ampernya gmn?

  • @bobBob-hu6ij
    @bobBob-hu6ij Рік тому

    is this fake ? it was the easiest diagram ever and i did it exactly but doesn't work

    • @VINInvents
      @VINInvents  Рік тому

      Its working really well for me, its a basic diagram you can do yourself.

  • @anderslandgren6745
    @anderslandgren6745 2 роки тому

    I was so curious, but having Huey, Dewey and Louie go BEEP-BEEP-MEEP loud enough to have the compressor roll over and die in agony... Sorry, but I'm outta here ;-P

  • @aktivitas5M
    @aktivitas5M 2 роки тому

    Mas minta tolong buatkan vidio tutorial cara modif PSU komputer menjadi PSU variabe dengan keluaran volt meternya secara digital yg dapat dilihat dan diatur dengan potensio sesuai kebutuhan misalnya 20Volt 4,7A untuk menegaskan laptop dengan memakai konektor universal yg dapat diganti-ganti jacknya. Mohon maafkan saya kalau dalam menyebut alat-alat salah atau tidak sesuai yang seharusnya karena masih pemula sangat membutuhkan bimbingan dari para senior.

  • @Oshadaindrajith
    @Oshadaindrajith 2 роки тому

    Wow🙂

  • @matrixredwood4817
    @matrixredwood4817 2 роки тому

    Use screws

  • @cevinnurhidayat5784
    @cevinnurhidayat5784 3 роки тому

    5itof