I love watching Tim just tell it like it is, no bs. I wish some other drag racers would listen to him. If you watch powerdrivendiesel, cletus McFarland, and the gtr racers on 1320 video you can see the weight issues, suspension issues, and all the stuff Tim is throwing out there, getting in their way. Yeah they are running 6.70s gtr, 7.87 Cleetus with a 6 speed h pattern manual, and 9.5s in a truck, but I would bet a week with Tim would have them drop .5 seconds or more based on their chassis issues. All 3 have the power, trans, and driver mods, but man dial those chassis!
So my question is. If you rotate the weight bar around the chassis mount in an inside/outside. Top or bottom. How much would that tweak the dynamics of how the weight is applied? I ask cuz im the jackass who uses ankle weights and duct tape and sandbags to add weight
It could definitely have an effect on a light car with a very slim tuning window. It also depends on the amount of weight in proportion to the overall set up. In most cases, it would probably be nothing to worry much about other than the safety factor of it coming off and hitting someone.
Using a controller like an Arduino, with A 3axis gyro, you could tell the ignition to cut power to keep the chassis angle at whatever you desire. Very generic non drag racer answer but theres gotta be enough shit out there someone is doing this
You said exactly what I was going to comment I'd drive my car heavier then lighter it steers better and if you get dinged on the track you don't move that much
Reminds me of a chat I had with an ice racer. The rules were stock suspension, so they poured cement in the door panels to lower the car. It pushed other cars out of the way and had excellent traction as it was about 8000 lbs
Isn't moving weight around on a chassis kind of a common sense thing? Especially the part when you say I would rather have a to heavy of a car that works over a lite care that doesn't. Who cares about a lite car that loses every round because you can't control what its doing? Common sense first!!
This would have to be one of the best shows on YT
This is the car set up guru. Learned so much from Tim Mcamis!! Thank u for great videos!!!
Learn something new every video.
I like to watching yours advice , because it helps to every racer
I love watching Tim just tell it like it is, no bs.
I wish some other drag racers would listen to him. If you watch powerdrivendiesel, cletus McFarland, and the gtr racers on 1320 video you can see the weight issues, suspension issues, and all the stuff Tim is throwing out there, getting in their way. Yeah they are running 6.70s gtr, 7.87 Cleetus with a 6 speed h pattern manual, and 9.5s in a truck, but I would bet a week with Tim would have them drop .5 seconds or more based on their chassis issues. All 3 have the power, trans, and driver mods, but man dial those chassis!
Tim as usual thank you for sharing your knowledge with us, I find it very insightful and helpful.
Great video, thanks. Will be a of great help for my upcoming project.
Love the videos and the all the info your give us maybe u could make a video about mounting ultra struts and setup
Very informative thank you Tim.
I've never been so fortunate as to have a car that was too light. At 250lbs, I just need to get weight off the driver, first.
much love from Australia, fantastic channel and always interesting content
Wouldn't it be easier to just strap that wristwatch to a tube?
good info , thanks for the lesson ,,
ThAnks. So good
Always good
if I take my mustang anywhere it will go to Tim cause he uses USA parts. glad somebody else builds like me.
Tim, I hope you have several children that end up to be smart patriots like yourself. Thanks.
So my question is. If you rotate the weight bar around the chassis mount in an inside/outside. Top or bottom. How much would that tweak the dynamics of how the weight is applied? I ask cuz im the jackass who uses ankle weights and duct tape and sandbags to add weight
It could definitely have an effect on a light car with a very slim tuning window. It also depends on the amount of weight in proportion to the overall set up. In most cases, it would probably be nothing to worry much about other than the safety factor of it coming off and hitting someone.
Great video
I wonder how much that watch looking puck weighs?
You should build also a sport car.
the god !!
Lead shot is difficult to find. It's only legal for skeet, in most states.
Has anyone done wheelie control with electronics like they do in motorcycle road racing?
Using a controller like an Arduino, with A 3axis gyro, you could tell the ignition to cut power to keep the chassis angle at whatever you desire. Very generic non drag racer answer but theres gotta be enough shit out there someone is doing this
You said exactly what I was going to comment I'd drive my car heavier then lighter it steers better and if you get dinged on the track you don't move that much
Back in my day I would just eat a ton before a race.
Reminds me of a chat I had with an ice racer. The rules were stock suspension, so they poured cement in the door panels to lower the car. It pushed other cars out of the way and had excellent traction as it was about 8000 lbs
If I was only allowed to change one thing on a chassis for tuning...it would be weight placement.
526th 👍's up Tim thanks for taking the time for us all
I don’t like weight lift I like old heavy weight more honest see how look picture are cheat easy race
It's just weird. I want my race car guy to be my lawyer guy. Or President would be cool too.
Isn't moving weight around on a chassis kind of a common sense thing?
Especially the part when you say I would rather have a to heavy of a car that works over a lite care that doesn't. Who cares about a lite car that loses every round because you can't control what its doing?
Common sense first!!
a lot of talking but thats it ,, put it here take off there , 20 lbs is a lot. thats preety easy to know