Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
Sure, everybody has those bearings and iron brackets lying around in the garage. That’s much better than buying a complete tool at the same cost of the independent parts so you can “make your own.”
Been wanting to make my own rollers for bike training inside... was gonna use this method and make 3 large diameter dowels... Do you think if I used this method would I need a metal rod to go the whole way through? As I was initially gonna use pvc pipe and just put some equally spaced "cookies" of wood to give the 3 inch diameter pvc pipe some structural support on inside...but if just get some 4x4 lumber and trim it down to the diameter I want...maybe I can save some money on pvc pipe... Thoughts?
Nice simple method. But one question - how would you make repeated precise dowels of a set diameter? Trial and error and lots of measurements with a set of calipers?
I like your setup very much. I think however it would have been easier to set the bar perpendicular to the apex of the blade and run the sled laterally.
Great video J. I've been meaning to make one of these for a long time now. I just wonder if it would be ok to use for small diameter dowels like 3/8" or 10mm. What do you think? Is the wood that small to easy to flex and damage it?
My way isn't proper. I think to make smaller ones would require chucking at the both ends. I'll give it a try sooner or later. You gave me another project. Thanks buddy.
There is a UA-cam video on doing just that with the table saw. I did it and the dowels turn out great! Sorry I can't remember where on YT I saw it but a search should come up with it.
@@j-woodworking9573 ⚠️ God has said in the Quran: 🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 ) 🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 ) 🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 ) 🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 ) 🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 ) ⚠️ Quran
Magnífico, parabéns.
Я и говорю: проще купить готовые черенки. В разы проще и дешеале.
Excelente proyecto muy bien desarrollado y mejor ejecutado , gracias por compartir tanta creatividad y conocimientos , un saludo cordial y por supuesto un gran like desde Narón , Galicia (España) 🤓 😜
I am amazed at how you look at the world. Thank you for sharing it with us.
Хотя идея не нова, твой вариант мне очень понравился! Удачи в Новом Году!
Really cool! A dust collection box would also be super easy to add to this design.
Очень хорошая идея!!!!👍👍👍👏👏👏
Terrific idea! Thanks so much for sharing!
What made a woodworker unique is your imagination. Good Job!
Sure, everybody has those bearings and iron brackets lying around in the garage. That’s much better than buying a complete tool at the same cost of the independent parts so you can “make your own.”
Ótimo projeto! 👍
It's just mindblowing how you thinked at this. Amazing!
Absolutely brilliant!
Nice! This video reminds me that I've got a brand new Jet Mini Lathe sitting in the garage begging to be used for something. 😀
Nicely done J! Very easy jig to make and gets the job done! 👍👍😉😉
Cool little jig. We shared this video on our homemade tools forum this week 😎
Really amazing work, man! Beautiful! 😃
Stay safe there with your family! 🖖😊
Que buena idea. Gracias por tus vídeos 👍
Fantastic job. The only thing I would change would be inserts in place of the wingnuts. I hate wingnuts!
As alway 👍, this jig is perhaps a good idea and easy to build.
I should try it !
Great idea. This will be my next project. 고맙습니다.
Bastante interessante, parabéns.
Excelente aporte amigo.
Saludos cordiales desde Reynosa México!!!
Genial!! Moltes gràcies!!👏👏👏
Saya sangat terkesan. Sempurna hasilnya tapi simpel cara membuatnya. Terima kasih atas ilmunya
great idea! thank you for sharing!
Parabéns pelo projeto achei mais simples e mais fácil de aprender 🤩
Fenomenal, me ha encantado mucho, gracias por esta buena idea
Very useful & nice jig
اكثر من رائع اتمنا لك التوفيق وشكرا على الفكرة👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Nice design!
Been wanting to make my own rollers for bike training inside... was gonna use this method and make 3 large diameter dowels...
Do you think if I used this method would I need a metal rod to go the whole way through? As I was initially gonna use pvc pipe and just put some equally spaced "cookies" of wood to give the 3 inch diameter pvc pipe some structural support on inside...but if just get some 4x4 lumber and trim it down to the diameter I want...maybe I can save some money on pvc pipe...
Thoughts?
Gracias me enseñaste algo muy bueno.perfecto su video muy instructivo.
Суперово.Просто і доступно.Лайк і вподобайка.
Merci pour le partage.
Meilleurs vœux pour cette nouvelle année.
Salutations de France
🇨🇵🇰🇷
This is Awesome and Very good your Jig 👍😎
Very nice thought out jig simple but very effective at producing round spindles of various lengths and thickness take care 😀👍
Very clever, well done
Congratulations on the UA-cam channel. Contains very interesting material about joinery.
Muy buena la idea💡de una plantilla para redondear madera.
Un abrazo desde Tucumán norte de Argentina.
Hasta siempre si Dios lo permite.
i love it, brilliant!
Excelente! Congratulations friend
very good idea..........woderful........
O melhor que já vi , perfeito.
Great idea. Thanks
Хороший вариант, если нет токарного станка! 👍
Ez az eddigi leg tisztábban dolgozó , rúd készitö, amit a jutubon láttam!😉 EZ MÁR MAJDNEM ESZTERGA!! .🤣🤣🤣
Very cool and serendipitous, I just got commissioned to make some jyo do staffs. I am going to change my plans. thanks
super idée👍👍👍
Excellent and simple
Genial!
Excelente trabajo no se necesita torno pero igual hay que tener una buena cierra de banco así que no es nada fácil tampoco!!
Nice jig!
好厲害
Excelente!
brilliant!
You are a genius
magnifico trabajo
Great idea
By raising up one side of the pillow blocks you could get tapered legs. 👍 😎
hey brother love the channel any good Japanese tool makers you can recommend? tia, and again i love the channel! keep it up!
Muito bom gostei dmais obrigado😀👍
Oh! Good job and qualt
Ho come l'impressione che sia più facile o conveniente costruire un tornio 🙂
Great idea and it does a beautiful job. I always enjoy your content. I think I’ll be building that thanks for sharing
Excelente precisão da ferramenta, gostei muito do projeto porque é simples e bem funcional... Forte abraço ... 🛠️👍🏼
bel bastoncino, bravo geppetto
Very clever.
What size is are the pillow blocks you’ve used there?
Esse eu vou fazer. Muito obrigado
Very good! If you make it adjustable, to spin at an angle, relative to the table saw, you can make tapered pieces, instead of cylindrical.
Great idea for making large diameter dowels but just trying to think of what to do with them.
@@johnroberts3723 The main use will be to make legs for furniture.
@@JoseSilveira-newhandleforYT 👍
Very nice 👍
Fabulous...
Beautiful
You are the master of the tablesaw!!! Great video!
Muy bueno,👍
Nice simple method. But one question - how would you make repeated precise dowels of a set diameter? Trial and error and lots of measurements with a set of calipers?
Молодец! Но это только для прямых изделий. А как сделать конус?
Brilliantly
Do you have part #s ? I've not see those bearing housings before. What are they called? Can I find them at Home Depot?
Hola. Cuáles son las medidas. Está muy bueno.
Why go from two winged nuts to four? I would like to make it but I want to know if the two winged nuts were not enough, so you added two more?
Top demais
Thanks!
onu düşünebilmek. helal olsun.
Amazing
6:50, yay!
Genius
perfect.
top notch
Thank you 👍👍👍
I like your setup very much. I think however it would have been easier to set the bar perpendicular to the apex of the blade and run the sled laterally.
Ххх
excelente
Now you can make a drum sand planer ..
Great video J. I've been meaning to make one of these for a long time now. I just wonder if it would be ok to use for small diameter dowels like 3/8" or 10mm. What do you think? Is the wood that small to easy to flex and damage it?
My way isn't proper. I think to make smaller ones would require chucking at the both ends. I'll give it a try sooner or later. You gave me another project. Thanks buddy.
There is a UA-cam video on doing just that with the table saw. I did it and the dowels turn out great! Sorry I can't remember where on YT I saw it but a search should come up with it.
@@j-woodworking9573 ⚠️ God has said in the Quran:
🔵 { O mankind, worship your Lord, who created you and those before you, that you may become righteous - ( 2:21 )
🔴 [He] who made for you the earth a bed [spread out] and the sky a ceiling and sent down from the sky, rain and brought forth thereby fruits as provision for you. So do not attribute to Allah equals while you know [that there is nothing similar to Him]. ( 2:22 )
🔵 And if you are in doubt about what We have sent down upon Our Servant [Muhammad], then produce a surah the like thereof and call upon your witnesses other than Allah, if you should be truthful. ( 2:23 )
🔴 But if you do not - and you will never be able to - then fear the Fire, whose fuel is men and stones, prepared for the disbelievers.( 2:24 )
🔵 And give good tidings to those who believe and do righteous deeds that they will have gardens [in Paradise] beneath which rivers flow. Whenever they are provided with a provision of fruit therefrom, they will say, "This is what we were provided with before." And it is given to them in likeness. And they will have therein purified spouses, and they will abide therein eternally. ( 2:25 )
⚠️ Quran
Cool Idea, well done. What is the thickness of your sawblade? Looks very thick like 5mm or 6mm.
6mm
Thanks for watching sir.
Queria fazer um gabarito de 1.55cm pra tentar fazer um taco de sinuca, oque você acha sera que daria certo
I’m not super familiar with table saws but I’d be worried about side loading the blade
Sweet
Good